Is there a "fit in window" feature?
I want to make a window any size, then "fit to window". Is that possible?
some of the image disappears behind the other windows.
Yes I'm afraid on PC, looks like you are now compelled to use the 'Application Frame'. Each one of the three Screen Modes will put the image behind the panels, at default positioning. Try repositioning it as c.pfaffenbichler has suggested.
Heres some more shortcuts which may help, some of which you may already know, some of which you almost certainly won't: - Control + and Control zoom the image. If you don't have Open GL - Bottom left of your application frame is a small box showing the percentage your image is currently displaying at. Hold down the control key and move a small slider left and right will zoom accurately, Add option to this will zoom more slowly. Control 1 puts the image at 100%. Space bar pans the image. F key switches screen modes.
With a combination of these you should be able to reposition your image very quickly.
WHY NOT MAKE A FEATURE REQUEST - Please add zoom (fit to window)? ignore panels option
Similar Messages
-
Can't Flex apps scale to fit browser window?
This has been brought up a couple of times, but seems to be a
mystery: How does one scale all content to fit the browser window,
preserving aspect ratio, and centering the content vertically or
horizontally (depending on whether the window aspect ratio is less
than or greater than the content aspect ratio)?
Since Flash is vector-based, I would have thought this would
be straightforward and encouraged!
Some information in an earlier post, plus experimentation on
my part, has yielded a bizarre and inflexible partial solution -
using StageScaleMode, and sizing the app's base container to
exactly 500x375 pixels, I can get content that scales with
the window size and doesn't have mismatched margins (though I
haven't figured out how to center it yet). In addition, there are
ugly scaling artifacts (look at the drop-shadows as you change the
browser window size).
Again, not being a Flash programmer, I baffled that this
isn't better supported, but I have to admit, most of the Flash apps
I've seen in the wild seem to all be fixed at some ridiculous size
like 640x480 or something. Are there some serious bugs here, or am
I missing something? Is there a better approach?
Here's a simple, complete, example (based on an example from
an earlier thread, but simplified a good bit):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx='
http://www.adobe.com/2006/mxml'
pageTitle="Resize Test"
layout="absolute" autoLayout="false"
addedToStage="event.currentTarget.stage.scaleMode =
StageScaleMode.SHOW_ALL"
>
<mx:Style>
VBox {
cornerRadius: 4;
borderStyle: solid; border-color: #000000; borderSize: 1;
horizontalAlign: center; verticalAlign: middle;
dropShadowEnabled: true;
</mx:Style>
<mx:VBox width="500" height="375"
backgroundColor="#808080"
paddingTop="20" paddingBottom="20" paddingLeft="20"
paddingRight="20">
<mx:VBox width="100%" height="100%"
backgroundColor="#808000">
<mx:Label text="This is some text" fontSize="12"
width="128" textAlign="center"/>
<mx:Button label="Button"/>
</mx:VBox>
</mx:VBox>
</mx:Application>quote:
Originally posted by:
jpwrunyan
Not bitmaps. Externally loaded images that get converted to
bitmaps. What I said is that 90%+ are online catalogues. Logically
it would be safe to assume they display external images of a set
size. Sorry that was unclear. It would interesting to see an
official survey.
Yeah, I was using "bitmap" to mean raster graphics, whether
the actual source be jpg, png or what have you.
quote:
Originally posted by:
jpwrunyan
And good luck getting anyone from Adobe to pay attention to
this forum let alone comment. Better to contact their support if
you're ever really stuck.
Another reason I'm thinking MS is going to win this war - my
colleague is having great luck in the WPF forums.
quote:
Originally posted by:
jpwrunyan
Another reason I thought of why resizing does not result in
rescaling by default:
HTML and JSP applications don't rescale when you change the
browser size. Just go to hotmail or msn and check. They reposition.
Flex applications are intended to behave the same way but with RIA
capabilities. That is probably the more likely explanation than
bitmaps merely not scaling well. Anyway, this behaviour was a
thought-out decision and I happen to agree with it. By the way,
older Flash applications
do rescale to fit the window by default.
Exactly! That's the big problem, in my view, with the
HTML/JPG based web, and is what a vector-based solution
(discounting raster graphics) should solve.
Firefox, and now IE7, have features to allow you to scale web
pages to overcome, in a stop-gap way, this problem. IE even scales
images and Flash apps, though some Flash suffers problems when
scaled. Firefox does not (yet?) scale images or Flash along with
the other content. Flash-based Elmo games at sesamestree.org, at
640x480, look pretty stupid on my 42" 1920x1080 LCD (played by my
3-year old, not me!), but at least I can now (try) to scale them up
with IE7 for him.
I do not believe this was a thought-out decision, it's just
inertia from the bad old ways of doing things. There should be a
working option to easily scale content to the browser window, and
if Flex doesn't provide one, Microsoft certainly is going to (with
WPF/E) as they have with WPF. I'm not a big MS fan, but I think
they get the way things are going with the proliferation in the
range of screen resolutions and sizes that web content is being
displayed on.
That said, I realize there is more to dealing with different
screen sizes than just scaling - you may have to change the amount
of content on the screen, dependent on what the subject is.
quote:
Originally posted by:
jpwrunyan
Now if you want the Flash Player to be able to import huge
.jpg files with 1000px+ resolution and selectively only load enough
information to make a smaller size bitmap image so you can rescale
with impunity, more power to you. Sounds great. I would love this.
But it still doesn't address what should happen when the image goes
beyond the original size. I know you're only using vector graphics
so it's not an issue for you.
Yep, raster graphics are troublesome. Worst case, a beautiful
picture frame grows to surround the image as one zooms beyond its
original size (insert smiley icon of choice here)
quote:
Originally posted by:
jpwrunyan
Finally to get back on the main topic:
if SWFLoader isn't working well, you could programatically do
the same thing. Have a sub-contaier inside the application
container which adjusts its scale accordingly to the size of the
parent application container. I have done this myself with the
Image class for zooming in and out from images (ironically 1000px+
images which were displayed at much smaller sizes).
<Application resize="adjustSize()"
creationComplete="adjustSize()" paddingLeft="0" paddingRight="0"
paddingTop="0" paddingBottom="0">
<Script>
private function adjustSize():void {
var newScaleX = this.width/content.width
var newScaleY = this.height/content.height
content.scaleX = newScaleX;
content.scaleY = newScaleY;
</Script>
<Box id="content" borderStyle="none" width=400 height=300
/> <!-- the width and height are arbitrary -->
</Application>
Something along the lines of the above should definitely
work. I am just basing it off my own previous code. You may have to
be careful of borders and padding if you decide to add them.
Whether it works better than the other suggestions you'll have to
decide.
Thanks for the code, and I'll try it. I'm new to Flex, and so
I'm still struggling with some things (such as when objects are
available for manipulation). -
How do I set the zoom level to automatically Fit to Window?
As I open new pages, or access links, the zoom level always reverts to 100%. How do I get it to automatically set to "Fit to Window" ?
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/ -
Image quality poor when using "fit in window" view
Hello,
i´m getting familiar with PS CS3 Demo and what buffles me is the poor quality of the downsized view of large images. I loaded a 8 MP JPEG image from a digital camera and it looks good in 100%, but when i choose to view the whole image to fit the window (33,33% in my case), the resulting "downsampled" image is very jaggy and pixelated. I use a freeware image viewer called Xnview that gives me a far superior view when viewing large images downsized - i can even choose to select a "HQ" mode so those images get resampled to look better. It it normal that PS does not offer such a thing (or did i not see it?) and delivers such poor visual quality or is there something wrong with my PC?
Thanks for your help.Though 6.735, 12.5, 25 and 50% views usually are OK too. "Image quality" is great, though sometimes deceivingly so. I guess I don't understand sampling enough to tell you why 33% looks bad (rounding errors, I suppose). But 66% makes sense. You're trying to stuff 3 pixels into the space of 2.
Dave, what are the advantages to these nearest neighbor views instead of bicubic (or even bi-linear). Just speed?
J -
Workbook doesn't fit the window when launched from Portal
Hello SCNer's,
When a workbook is launched from Portal it opens to the right side of the window and is minimized.
It fits the window once maximized, are there any settings available which can defaultly set the workbook to fit the window.
Thanks SCNer's.Hi,
Do you mean by executing the Query in portal or executing the Workbook.
Protal setting for the number of columns/rows are decided by 0ANALZER_PATTERN web template. Which is the default web template.
Check the settings in the Default Web Template used.
Thanks & Regards,
Namrata -
CREATING A PDF THAT OPENS TO 'FIT IN WINDOW'
Using InDesign (I'm CS2) is it possible to create a pdf with a default setting so that no matter who opens it (with Acrobat) it will open to 'fit in window'?
Is this a creator defined attribute?
I know that one can set their preferences in Acrobat so that all files open to 'fit in window'. But is there something that InDesign can do to insure this will happen no matter the end user's preference settings?
If not, is there a cheat? Is there a default dimension that will assuredly open to fit in someone's window? In other words, I would use this cheat for all e-mailed versions of the file.
Thanks!Sorry...you already know the only way to get this to happen.
Bob -
How do I get "fit to window width" to work?
I'm having a problem getting "fit to window width" to work. It was working ok until recently. I'm viewing a letter size page and full page view is at 73.1%. When I select fit to window width it goes to 72.9% and is still in full page view.
Is there some setting somewhere to fix this?
Thanks,
MikeHi Mike20878,
Thank You for posting on the forums. Kindly try the steps mentioned below, hope it helps.
1) Open Acrobat
2) Click on Edit>Preferences
3) Go to Page Display under Categories
4) Change the ZOOM to "Fit Width"
5) Click OK
6) Restart Acrobat and then open the file.
The preference now saved would apply to all files.
Thanks,
Vikrantt Singh -
Hi everyone. I got a envy h8-1513c running on windows 8 64-bit. I went on my windows feature page and I mistakenly unchecked all the features. At this time, no applications or programs were working. I paniqued and I went back to the windows features page and I checked all the features...Unfortunately, it did not solve the issue: I was still not able to run the windows updates and to open files, apps or programs. I ran the BIOS update and when the system restarted to configure the update, the automatic repair started itself. The nb restarted and everything is working fine. Now I'm able to run windows update, open files, apps and programs. However, when I go to the windows features page, it's just blank. . .what can I do to fill it out again. . . does it really matter if it's blank, I mean the nb is working fine so maybe it's not that bad...please help me for this. I have a lot of questions in my mind :-(
Hello thebrave007
I can appreciate your concerns with Windows 8 and I am linking you a document that should resolve your initial query and possibly answer your other questions as well. The document I am linking below is 'Learning How to Use Windows 8 Features and Apps' there are a large number of links in this document to different topics that you possibly have questions about.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03325557
If you have any further questions for concerns please feel free to re-post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Automatically create checkboxes and fit to window
Is there a way to automatically increase the number of check-boxes that appear on a user input dialog box?
This is what I am trying to accomplish:
Read in an array of strings
Create checkboxes based on the array size and fit to window (similar to express vi)
ThanksNAdvance
FredFred
Solved!
Go to Solution.One slight change to the cluster, I would either put an clear decoration over the string control or disable the string control (property disable = 1) to prevent the user from typing on the string control. I use this disable trick to make the appearance of clusters that are controls and indicatiors (eventhough ther are really all controls)
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
Windows 7 shake-window feature in openbox?
Is there a way to implement the windows 7 shake-window (minimize all except shaken window) feature in openbox?
awayand wrote:minimize all except shaken window
seems pretty clear to me? At any rate, the things you can make Openbox do are all laid out in the big list of 'Actions' (http://openbox.org/wiki/Help:Actions#ToggleShowDesktop) - ToggleShowDesktop coming closest to what you're describing (basically, it's minimize all and shift focus to desktop). No obvious way to make exceptions, though.
As for _how_ you do it, there's the Bindings list. I dont use much mouse in OB, so you'll have to find it yourself. -
Is there a "snap-to-playhead" feature?
I'm brand new to Captivate (using 8), and am finding myself constantly needing to adjust the right (end) edge... usually to the playhead. Is there a 'snap to playhead' feature? Is anyone else having this issue?
It is not getting there by using CTRL-E, but when you drag manually the end of the object timeline to the end of the slide timeline. Get rid of it ASAP, you can either use a shortcut (see Tiny Timeline Tidbits - Captivate blog) or manually, and then use CTRL-E. Dragging on the Timeline can have issues, I agree. Why do you drag? Is it to change the stack order? There is an Alignment toolbar (use Window menu) that has also Arrange buttons.
I did see your questions in the other thread (beware: I'm stalking you). You cannot convert a responsive project to a normal or vice-versa. You can reuse the assets that are in the library. What you'll never see in the Adobe videos is that all objects have styles for the 3 breakpoint views. When I'm training I always start explaining the Object Style Manager, Themes (with all their components), Preferences and the Timeline, but I seem to be the only trainer working that way.
You should use only web fonts (they appear in a group at the top) for responsive projects. Captivate doesn't embed fonts, that is the reason. For real preview only use Preview in Browser. -
Acrobat Pro XI frequent crashes when using New Window feature
As a lawyer using Acrobat Pro XI to review legal documents, I find the New Window feature invaluable since it lets me view different parts of the same document at the same time. However, when I use this feature I encounter frequent crashes, more often if I insert a comment in one of the windows. Inserting those comments are very important to me. Is there any way to avoid the crashes while using the New Window and Comment features together?
Moved to https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs
-
Turn Windows Features on or off Application Development Features
I am having an issue where the windows features under Internet Information Services/World Wide Web Services/Application Development Features will not install. Specifically those which are clicked on when one clicks on ASP.NET. All necessary versions
of ASP.NET are installed. IIS 7 is installed.
In the Event Log there are two errors which are shown in conjunction with this problem.
1. Unable to install counter strings because the SYSTEM\CurrentControlSet\Services\ASP.NET_64\Performance key could not be opened or accessed. The first DWORD in the Data section contains the Win32 error code.
The error code is: 020000000E0E0000
2. Installing the performance counter strings for service ASP.NET_64 (ASP.NET_64) failed. The first DWORD in the Data section contains the error code.
The error code is: 02000000C9120000
I am thinking that the performace key is somehow not accessable due to some security feature.Jerry and Andre,
I too was receiveing these errors in my event log regarding iis and ASP.NET:
1. Unable to install counter strings because the SYSTEM\CurrentControlSet\Services\ASP.NET_64\Performance
key could not be opened or accessed. The first DWORD in the Data section contains the Win32 error code.
The error code is: 020000000E0E0000
2. Installing
the performance counter strings for service ASP.NET_64 (ASP.NET_64) failed. The first DWORD in the Data section contains the error code.
The
error code is: 02000000C9120000
I
am thinking that the performace key is somehow not accessable due to some security feature.
I wanted to let others know that I have confirmed Jerry's solution works. Simply turn off and on IIS in Windows Features. :) Thanks, Jerry!!! -
I updated the firefox mobile for Android and as a consequence firefox icon was removed from my galaxy note 2 multi window tray. Is there any method to get this feature back? If not can I reinstall a firefox version that supports this feature?
Note: I've already tried Firefox 21.0 BETA version. There is no change.I've just found out that the developers have removed this because an user reported some icons that appear on screen can block some pixels if application. However, that is ridiculous to remove it. If so , the user must turn multi window feature off. There was no need to remove it.
-
How do you disable the split screen / multi-window feature.
I have had my phone for 2 days, and I can not figure out how to turn off the split screen/multi-window feature. It pops up automatically at the worst times and it is getting very frustrating. I have read many things on how to use it, but have yet to find any thing that explains of to disable it.
Well, it doesn't seem that there is a way. But I solved my
problem because my minimal player was Flash 7,0,29,0 and reset the
minimal player to 7,0,0,0.
Maybe you are looking for
-
i am using windows vista and a HP Laserjet pro 200 color MFP M276nw My goal is use the MFP to scan and send a document, photo, etc via email using my hotmail account. i tried to create an outgoing email profile using the HP device toolbox. i am usi
-
I would like to replace my retina display
I would like to replace my retina display because of image retention. Is it possible to replace it?
-
How can I get my replacement phone?
<< Duplicate post. Please see https://community.verizonwireless.com/message/1050115#1050115 >> Message was edited by: Verizon Moderator
-
Regarding Table maintanence generator
Hi, I have a requirement were in i need to upload data in to this customisizing table using table maintanenece gen....My requirement is to hide the primary key which is of no use to end user instead when he enters data into this the i should generate
-
Hi Experts, I have created HU using HU02 and used MB1C for quantity and recived the inbound delivery no. So I want to add these already creted HU to pack the inbound delivery. In SDN evryone suggested to use this FM : PROCESS_HU_INBOUND_DLVRY But do