Is there a fix for my imac monitor burning highlights into blue shapes on my screen?

Whenever I leave an image or window open on my imac for longer than 5 minutes the white boxes or white in the images burn a blue shape onto my screen.  It is apparent in every program and finder, but overly so in photoshop.  Is there a fix for this or do I need to take my computer in?  I've tried changing my display settings to AdobeRGB 1998 and turning down the brightness but neither fixed it.

Image persistence on LCDs is not permanent like screen burn on CRTs.
Have a look at > Avoiding image persistence on Apple LCD displays
Personally I use a Hot Corner to Sleep my displays when I get up or when I'm not looking something. I also have the Display Sleep timer set to 10 minutes, just in case I get up and forget to use the Hot Corner.

Similar Messages

  • My iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install :(?

    my iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install

    Apple support article:
    Startup Grey Screen
    You can try to check your hard drive.
    Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
    Apple Hardware Test

  • I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    Can you see them in Disk Utility?
    If so, can you select and Mount them?
    If not, disconnect them, reset the iMac's SMC and then reconnect them.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

  • Is there a fix for modal dialogs opening behind palettes -cs6 -osx 10.6.8

    Is there a fix for modal dialogs open behind palettes in
    Photoshop cs6 13.0 (createive cloud update) + OSX 10.6.8 Snow Leopard on MacBook Pro? 
    ( I am using 2 monitors where the second monitor is set to be the menu display.  cs4 does not exhibit this bug. )
    Toggling the Application Frame off improves the hiding 'feature' but this does not include the desired continuous floating in front of palettes in all circumstances.
    An example is Blending Options, then chose Stroke, then chose the Color Picker.  After clicking OK, the Blending Options dialog now sits behind the palettes.  One trick is to click on another app, then back to cs6 to force a window redraw.
    It sure would help me if this could be solved.  I am preparing educational videos and this display bug makes things very troublesome.
    Thanks for any help.  If I find a solution, I will post to this thread so everyone can benefit.

    The setting for the graphics check box Does Not make a difference.  If I have a new document window open, then add a layer, then open the blending options > drop shadow > edit the color > the chooser dialog opens, and immediately both dialog windows drop behind the palettes AND any document windows.
    The same behavior for the Preferences dialog > guides > color.
    The quick workaround is to click another app, then back to CS6.  A real pain, of course.
    It is only a factor when opening a second (child) dialog box.
    Other CS6 apps do work correctly (eg. FW AE)
    I have yet to get a handle on this.  Mac OSX 10.6.8    CS6 13.0  x64
    Thanks for your replies, and the long reply time for me was a vaction away from the office.

  • Is there a fix for a Flash Player compatibility problem?.

    My computer is a imac g4 1.25 Ghz 17 inch flat panel running OS X 10.4.11 and can no longer view anything on the internet that uses the newest version of flash player.  I have tried to upgrade to that version but it won't work on my computer. When I try to download it I get this message "Devices with powerpc processors are no longer supported." Is there a fix for this?

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    It works for me.

  • Is there a fix for a dead ethernet port besides a new logic board?

    My ethernet port went dead on my IMac.  I unplugged the ethernet cable and plugged it into my laptop and it worked instantly.  I am still able to connect wirelessly.  I bought an apple USB to Ethernet converter and plugged it in.  It worked for about 3 days and then it went dead.  Once again I was able to unplug the ethernet cable, plug it into my laptop and instantly had a connection.  Is there a fix for a dead ethernet port besides a new logic board and if not how do I figure out which logic board I need?
    Thanks
    Step

    This problem baffled me. I kept getting the "ethernet cable unplugged" error after testing my cables good. Was abut to write it off as port gone bad when I found this thread.
    The YouTube video reference above fixed my problem. (http://www.youtube.com/watch?v=u1P6X87qArs)
    Basically go to SETTINGS/NETWORK. Then highlight your ETHERNET port and click the ADVANCED button. From there click the HARDWARE tab.
    Set
    CONFIGURE to MANUALLY
    SPEED to whatever your ethernet speed is, in my case 1000baseT
    DUPLEX - FULL DUPLEX, FLOW CONTROL
    Leave MTU at Standard
    Hit OK.
    Then don't forget to hit APPLY. I didn't do this the first couple of times assuming hitting OK applied these settings. You gotta hit APPLY.
    In about two seconds, my Ethernet connected again.
    I went back and reset it to AUTOMATIC just to test and after doing so got the cable unplugged error again. So I am leaving it on manual and it's working.

  • Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

    Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

    gmiller0 wrote:
    My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
    What model of Mac?  I have a MBP running 10.7.3 and do not have that issue.  From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs?  Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

  • EXS 24 crashes when I load any sample. Is there a fix for this, perhaps an install / reinstall poison as such? Any help would be very grateful.

    EXS 24 crashes when I load any sample. Is there a fix for this, perhaps an install / reinstall option as such? Any help would be very grateful.
    I purchased the iMac second hand and is in very tidy condition only used for production.  I'm not totally clued up on the Mac side if things as I was a windows user for years. Please be gentle ! :)

    Thank you. I figured it out right before I heard from you.  Running the OCR before the redaction made it work correctly.
    Thank you so much for taking the time to answer my question.
    Make it a great day.
    BG10

  • My mail shuts down every time I add a new mailbox? Is there a fix for this?

    My mail shuts down every time I add a new mailbox? Is there a fix for this?

    Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/thread/4663309?tstart=0

  • HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    jengrz wrote:
    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
    TechCrunch posted a solution today that applies to this problem, I think.
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Click your old iPhone and "unregister" it.
    More info here:
    http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

  • Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app.  I just get a blank white screen.  Is there a fix for this yet?

    Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app.  I there a fix for this yet?

    Scalesy05 wrote:
    I there a fix for this yet?
    Why would there be a fix?  YOU are having the problem.  I'm not, no one I know is having the problem.  No fix is needed.
    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.  Have you been through any, if not all of these troubleshooting steps yet?

  • My iphone 5s with lightning to 30 pin adapter doesn't work in my audi A6 to play music, only to charge the phone. is there a fix for this?

    my iphone 5s with lightning to 30 pin adapter doesn't work in my audi A6 to play music, only to charge the phone. is there a fix for this?

    Is the adapter the genuine Apple product or a copy

  • Ever since the most recent firefox update, every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it?

    Every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it? When I restart firefox, then the download continues and all is well until I try to download something new (which I do quite often).

    You may well find this article of interest and help in sorting out your problems: [[Installing a previous version of Firefox]] The article does contain a link for previous versions, but also points out other troubleshooting advice that may be more appropriate in some instances.
    Another useful article is [[Basic Troubleshooting]]
    I hope you sort out your problems either by downgrading or finding the cause of the problem.

  • Upgraded to Lion & can no longer finger swipe for/backwards between pages. Is there a fix for this?

    Title says it all. I just upgraded to Mac OS X Lion, and can no longer use a finger swipe, whether one or 2 fingered, to move backwards an forwards between pages. I can still do so in Safari, but not in Firefox 5.01, my preferred browser, any longer. Doesn't matter if I try using one, two or more fingers
    Is there a fix for this? Thank you.

    If you download this program http://blog.boastr.net/?page_id=1722 (better touch tool), you can make your own swipe gestures.
    However, I have been able to three-finger swipe forward and back on webpages by going to ''system preferences'' > ''trackpad settings'' > ''more gestures''
    and checking the box at ''"swipe between pages"'' and selecting ''swipe left/right with 3 fingers''

  • I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    Sorry to have repeated this question as if I were answering it.  Just a mistake.  I'm just now learning how to use this site.

Maybe you are looking for