Is there a fix to touch not working? All updates are done. Intermittent problem

Is there a fix to touch not working? All updates are done. Intermittent problem

Do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
If that does not help, take it to an Apple store genius bar and have the techs check it out to make sure there is not a hardware issue.

Similar Messages

  • Is there a fix for OMF not working

    I am fairly new to CS6 Premier Pro and just cannot get it to export OMF. I went the route of sending to audition, and after loading a fix there (it crashed halfway through the omf process) it did create omf's or so it seemed. There was no media in the resultant omf but the tracks and names were all there. Straight omf from PP simply does not work. Is there a fix for this?

    Hi Jim, related issue for me.
    Older version CS5. (I did not want to upgrade during project on advice of other editors).
    The OMF export files stall, (many threads about that already). On camera audio (HDslr's) as bumpers with banter, then 48k masterd tracks from CD release.
    Is my best bet to export as FCP XML, find a friend with FCP7 and have them ingest (then export) OMFs for me?
    Deadline, and mastering session booked for today was put off  until I can deliver OMF's to the session. Last night I assumed sending out OMF would be simple, having not used that before.
    Turned out poorly it seems.
    Any thoughts, from the savant realm?
    Thanks!
    Rob

  • Ipod touch not working after update

    I just attempted to install the latest iPod touch software update via itunes. It downloaded and started installing and everything seemed normal. Then I got a weird error that said something along the lines of "Could not update ipod. Error 9" Now the ipod won't turn on at all, won't reset, and itunes doesn't recognize it. When I plug it into my pc (where it is synced), I get a windows bubble that pops up saying the device isn't recognized. When I plug it into my mac, nothing happens at all.
    Any suggestions?
    -CEJ

    Hey everyone. I had this same issue (1st Gen iTouch crashed in the middle of the update with an error, then perpetually showed the USB cable picture and wasn't recognized by my PC).
    I was flying West for Thanksgiving, and the prospect of not having my music was so terrifying that out of complete desperation, I borrowed my roommate's Mac to see if I could somehow magically finish the update there. For whatever reason, it worked!
    I don't know if it was the fact that it was a Mac, an older version of iTunes, or what, but I was able to do a restore after downloading the new firmware on his computer (I think it was an old Powerbook G4), though I lost all my data. Still, it works now, and I was (thank God) able to listen to it on the plane trip after re-adding my music.
    So I wish I could give more details, but at the very least, THERE IS HOPE! Maybe someone more daring and less busy than I can narrow down the variables, otherwise I'll see if I can figure more out when I get back home this weekend. However, I sincerely hope Apple takes responsibility and figures it out themselves before then. Given how serious losing your ability to listen to portable music is for most of us, I really can't believe that they haven't even deigned to address this issue on their own boards.
    Anyway, happy Thanksgiving everyone, and hang in there.
    -J

  • Iconia Tab 8 W Touch not working after update to Windows 10

    So, I have an Iconia Tab 8 W which came with Windows 8.1. I updated to Windows 10 but there seems to be some issue with the default graphic card driver since the touch doesn't work (works during the installation process so it's not a hardware problem). I managed to plug it into a powered USB hub and get a classic mouse-keyboard setup working but the touch is still dead. I found drivers on the ACER website but not only do they not have any sort of "setup" or "install" file, the Graphic Card doesn't show at all on the device manager. So, the "update driver" option is not an option.  I've tried reverting to Windows 8.1 but the place where this option should be doesn't show it. I can only clean up the PC or boot into safe mode. Tried both, none works. As a last resort, I downloaded the Windows 8.1 media creation tool and booted into it to reinstall Windows 8.1 but now it asks me for the Windows key which is no where to be found.  Anybody got any ideas?

    IIRC the touch driver and te graphics driver are two quite different things. The touchscreen digitizer looks to the system like a USB device, so a problem would show up in Device Manager either as a USB problem or a HID problem. Try W10 again but this time look into the different secions of DM for the issue.

  • I got ipod touch not working, screen totally blank and the problem is i don't have nearly a year what should i do

    i have ipod nano wont works after i changing its and the problem is i cant remember when i got its or if its out of warranty, what should i do??

    If the card has been redeemed onto your account then you shouldn't need to re-enter it - I've never had to re-enter any of mine, and once a card has been redeemed it effectively becomes zero, it's value should be added to your balance. What is happening when you try to buy the song ?

  • HT4759 Help, I can not get my iphone to change my email. I changed it on icloud and itunes and it comes up correctly there. I have synced my phone hooked to computer. all updates are done. The phone will not come up with the new email soI cant use icloud

    phone says Photo Stream.   photos for the icloud account "icloud" cannot be accessed. Review your account information in Settings. When I got to settings a pop up says Apple ID password and under that is my email. BUT it is the INCORRECT email. When i try to put in the password for the OLD email it won't work. It wont work if I put the password in for the NEW email either. In Settings -> my Account says the OLD email, when I click on that email it takes me to the icloud Account Information. Says Apple ID is the Old email. BUT I changed my email on icoud and verified it I also change my email in itunes and am able to access the Apple App store on my phone and itunes. It is correct everywhere except on my iphone. It came over correctly to my iPAD but won't on my phone.  I also can't use the icloud push or load my icloud storage plan to my phone. Please help...

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Home button is not working all the time

    I have started to notice that when I press the home button on my iPhone 4 it does not work all the time. This problems has only started to occur and was first noticed around three months back, however I did not make a big fuss out of this because it was not as often as it is now.
    Sometimes i find this extremely frustrating as it occurs even when the phone is locked and you are trying to bring up the unlock menu (which I know this can be done by using the wake up/ lock botton located on the top of the phone)
    but this also is a pain when it happens, whilst using an app e.g. playing a game and trying to text someone.  Because of the faulty this also makes multi tasking sometimes impossible.

    Try calibrating the Home button.
    1. Open a pre-installed app, such as Contacts
    2. Press and hold the sleep/wake button until the red slider appears
    3. Immediately release the sleep/wake button; press and hold the Home button.
    4. Hold until the red slider disappears.

  • Macbook Pro sound sometimes won't work. Took into Apple to be fixed. Still not working.

    I purchased a Macbook Pro in July 2014 so my computer is still new.  There is no damage to it (it has never been dropped and kept in case).  My issue started about a month to month and half ago.  When watching netflix the show will stop and when I try to hit play it comes up as an audio system error. 
    The sound won't work and then a few minutes later it'll turn on, as if it was lagging.  For example I would send an email and try to hit the volume button to get the sound to work and then a little later I will hear the whooshing sound from the email and the sound adjusting sounds from the keys all at once. I followed the steps from netflix to fix it which were to uninstall and reinstall silverlight.  That still didn't work.  After a while I took it into Apple and they replaced the switch board.  I got my computer back yesterday and today it is still not working.  I have done everything I can think of to fix it.  What else can I do?

    Return it to the repair shop.  Tell them they didn't fix it.  Take full advantage of your warranty.

  • Nokia Lumia 720 Touch not working even after repla...

    Hi ,
    I had bought lumia 720 on 31/05/2013 , but on 28/12/2013 the touch was not working or the touch was working on its own. Since my phone was in warranty then, they replaced the touch free of cost. But again from 20/08/2014 my phone is having the same problem, touch not working. When i showed it to Nokia care, they told that again they need to replace the touch , it will cost around Rs. 7950 (since my phone was out of warranty this time)... My question is, within 1 year 2 months , twice the touch pad has problem. What kind of phone it is .... Please think before buying Nokia touch phones, I think still they are far behind in touch screen technology ( no offense :-)  )....
    Not only me, one of my friend also facing same problem with Lumia 720 ....

    Not beeing familiar with other countries consumer laws and consumer rights, I can only speak for my self and Norway. But as far as I'm concerned I would have expected extended rights for the new parts and the labour. - If however the fault can relate to the parts involved with the mentioned replacement.
    But if this is not possible in your country, there isn't much to do other than repair it for pay or leave it.

  • I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    my laptop is Windows 7 and ip is this
    192.168.102.12
    255.255.255.0
    192.168.102.1
    DNS
    192.168.254.2
    192.168.254.3
    in ipod touch 4g is DHCP and its showing
    ip address 169.254.192.139
    subnet mask 255.255.0.0.
    remaining all blank

  • Connecting my iphone to wall charger makes my iphone touch not work properly

    I have a iphone 3g and a orignal apple wall charger when i connect my iphone to charger it makes my iphone touch not work properly, but it charges the phone properly.the data cable is also working properly. So can any one help me out here.thanks

    Holy smokes, I thought I was losing my mind, but that's the exact same thing that's started happening to me since this whole 4.3.1 "upgrade" disaster started - hooking it up to the wall charger overnight, wake up in the morning and it's a brick requiring multiple attempts to restart.
    It's also randomly and spontaneously crashing - it'll be on the table or couch beside me, I'll catch movement out of the corner of my eye and look over and see a silver apple.

  • My ipad 4th gen touch screen is not working in one area

    I had a screen replacement and now the Ipad 4th gen touch screen is not working in one area ( a strip across the middle). We tried 3 different touch screens with digitizer...any ideas?

    Since Apple doesn't replace screens, they replace the iPad, I presume you had your screen replaced by an unauthorized service provider or perhaps you replaced it yourself. That voids the warranty and the ability to get assistance from Apple. If someone else replaced your screen take it back to them and demand the correct the problem.

  • [svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

    Revision: 13257
    Revision: 13257
    Author:   [email protected]
    Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
    Log Message:
    Fix for @inheritDoc not working on a setter, but works on a getter
    QE notes: None.
    Doc notes: None
    Bugs: SDK-24727
    Reviewed By: Paul
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24727
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

    steabert wrote:
    Hi,
    I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
    The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
    options snd-hda-intel model=dell-s14
    I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

  • I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

  • HT1351 Now update v.ios7.1 my iphone 4s..after update with itunes look have something about assistive touch not work

    After to update ios7.1 have something it wrong.assistive touch not working some before

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Best way to record multiple midi passes?

    I am new to X (but a long time midi composer with Logic). I have a Logic Pro X newbie question, and would really appreciate some feedback: I like to record midi in multiple passes. Example: I'll record piano chords in one pass. Then duplicate the tra

  • Bootcamp Error - MacBook Pro 4.1

    Hi, All: I know there have been a lot of Bootcamp questions asked and answered, but after following several suggestions - and continuously hitting wall after wall, I decided to turn to the message board for help. I originally was given an error using

  • ME52N-Create PR with Multiple plants..

    Hi, Version of our SAP System is 4.6C.. In ME52N transaction there is a tab called 'Release Strategy'... In this we have to enter materials belonging to same plant.. for ex : if item1 is of plant 1011 then plant of item2 should also be 1011 but accor

  • Does anyone has experience in using Runtime Share Libraries (RSLs) in flex?

    I am getting this error from Flash CS5 when publishing the SWC file: "Warning: No libraries were linked as Runtime Shared Libraries (RSLs) because of your publish settings: Export SWC" Does this interferes when compiling the flex project that uses th

  • Reference Assemblies Dialog in VS2013 - why are hidden COM type libraries included?

    Why are COM type libraries that have the hidden attribute displayed in Visual Studio when you add a COM type reference to a .Net project? These hidden type libraries are not displayed in VBA, and the hidden attribute is supposed to prevent their disp