Is there a fix yet for the find function in tiger?

I have a mac pro and a G4 and it works fine.. I installed Tiger on my G5 and it doesn't work. I have to restart in 10.3 to get "find" to work.
any suggestions out there ???

Hi cloprod!
Do you mean Find (Command + F keys), Spotlight, or Sherlock?
Whichever, what do you means it doesn't work? What happens?
ali b

Similar Messages

  • Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
    If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

  • Is there a fix yet for the loss of battery power after updating to Lion?

    Is there a fix yet for the loss of battery power after updating to Lion? I've done the cmd-opt-shift restart and it didn't help.  This problem has gone beyond annoying now - it is absolutely maddening!    What is Apple's official response????

    Chris: your friends are woefully uninformed, and no one should pay any attention to their bad advice.
    http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446?viewlocale=en_US
    http://batteryuniversity.com/

  • HT1926 is there a fix yet for the lack of update of iTunes and the MSVCR80.dll absence?

    iTunes update doesn'twork

    Hello, DrJon72. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Is there a fix yet for Firefox so it can play videos on websites with "Hotlink Protection"? It's been 9 years now and still no fix.

    How come Firefox still hasn't come up with a fix for it to be able to play videos from websites that have "Hotlink Protection"? The error "Video not found" always comes up. This has been like this for almost 8 or 9 years now. (I'm probaby off by a year or two). Internet Explorer, Google Chrome, Opera, Safari, etc... all have no problem whatsoever and can play the videos easily.

    Applecare on the phone is torturous, I spent an hour getting redirected back and forth between 3 different departments each saying "This isn't my area, you need to talk X department" or "why did they send you back to me?" Then you get disconnected.
    The nearest apple store is about 2 hours away. If I'm near it again, I'll stop by. I was just hoping either the problem was patched or someone online knew how to fix this infamous problem yet.

  • Is there a fix coming for the iPad Air's issues with rotation locking???

    The iPad Air has an annoying glitch in its occasional (frequent) shift to landscape mode, and locking in that position.  Is this a known/reported issue with a fix coming?
    This didn't occur with the older version of the iPad.
    Thx.

    iPhone, iPad or iPod screen will not rotate, fix
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
    iOS Screen Does Not Rotate
    http://support.apple.com/kb/ts3805
     Cheers, Tom

  • Is there a way to change the alert tone for the find my iphone app?

    Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

    Welcome to the Apple community.
    Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • The find function (Ctl+F) , doesn't not expanding the xml file , to search for given search. If the the xml file is expanded , then find function finds the tag and data. How to fix this.

    The find function doesn't expanding the xml nodes to search. If the xml is expanded , then find function highlights both matching tag and data. how to fix this.
    == This happened ==
    Every time Firefox opened

    <xsl:value-of select="x"/> produces a string that consists of all text nodes in x.
    <xsl:copy-of select="x"/> produces an exact copy of x.
    Go to http://www.zvon.org/ for more information like this.

  • I have upgraded my iPhone 4S to ios 6... I am surprised to see that the wi-go option is grayed out.. I did reset all the setting but no luck... Is there any fix coming for this or will apple exchange the device??? I want wi-fi option back

    I have upgraded my iPhone 4S to ios 6... I am surprised to see that the wi-go option is grayed out.. I did reset all the setting but no luck... Is there any fix coming for this or will apple exchange the device??? I want wi-fi option back

    Seems like a wide spread problem. See this post: https://discussions.apple.com/thread/4310121?tstart=0

  • Is there anyway I can retrieve my street view back for the Find My iPhone app?

    Is there anyway I can retrieve my street view back for the Find My iPhone app?

    My wonderful daughter gave me the solution to my problem.  Hopefully it will work for you as well - a Hard Restart....To do this you will need to hold down the screen lock button and the home key together until your iPad shuts off.  Once your iPad has shut off, simply restart it.  Once the iPad was turned back on, my street views returned for all of my maps :-)

  • Is there a chat client for the iPod Touch or iPhone yet?

    Is there a chat client for the iPod Touch or iPhone yet? I already know about Meebo and JiveTalk which allow me to chat on all the major clients, Yahoo, MSN, and AOL. But how about a standalone app?
    Thanks,
    Jeff

    And so when are we talking about here? That one app and then I think this thing will be complete! Well I suppose we could use another food processor, garbage disposal, answering machine, music player, Swiss Army knife. But I'll be happy if I can just chat with friends!
    Thanks!
    Jeff

  • Is there a docking station for the MBP yet?

    Is there a docking station for the MBP yet?
    Just wondering?

    what are they for exactly. it looks like it plugs into the ports on one side. then the other side... the same ports. so what does it do?
    EDIT...ok i read up on it. so its basically something you would leave at work so you just plug the dock in and use unstead of having to unplug and replug anything you use specifically for work? i see lol.

  • I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    For what? It works fine for me on three different computers. If you want a fix for something then be more specific.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

    Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
    the incorrect entry? Adobe installed a very quick update today.

    They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.1 r53
    * Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Maybe you are looking for

  • OneDrive for Business (on Premise) "we can't connect to the specified sharepoint site..."

    Hello We have SharePoint 2013 SP1 and CU Sept. 2014. Problem: When a User tries to sync with a sharepoint subsite, he gets the message above in the title until we give him at the minimum "read" permissions on the top level site collection. https://si

  • Help with zoom in on items in a List with a TileLayout + repositioning

    Hi, I'm new to flex and I'm implementing  a menu that zoom in on the hovered state. The zoom in works fine, but I've been  trying usuccesfully to reposioning the tiles on the borders, so the zoomed version of the tiles can be displayed inside of the

  • Inconsistent datatypes: expected - got -

    hi i am getting the error Error(45,12): PL/SQL: ORA-00932: inconsistent datatypes: expected - got - in this procedure i tried a lot and landed in confused state.. create or replace PROCEDURE BT_CPE_XML_READ1 IS dest_clob CLOB; src_clob BFILE := BFILE

  • Automatic TO creation with WMTA during delivery

    Hello, We are creating TO for ZLF delivery with WMTA output type during the creation of delivery. But after WMTA output type is competed, we are trying to display the Transfer Order information with smartform using the ZMTA output type by triggering

  • Opening file crashes Indesign CS5.  What now?

    I was able to find a discussion about this, but it seem like it ended without a solution. If this is a font issue, is there a solution to this?  I went to Font Book and cleared out any errors from all my fonts. I created multiple backup files for thi