Is there a free version of an Mac Word that I can download. My previous computer was an HP and it was installed for free. I tried downloading it but halfway through the process, a message popped saying it is currently running in one of my programs.

I googled and downloaded a free version in my mac but halfway of it being downloaded, I was informed it cannot be properly installed as it is running in my program? Is there a built in Word for Mac. I have never been a Mac user so everything is new to me.

Allan Eckert wrote:
There is OpenOffice and NeoOffice which are free
NeoOffice is not totally free. You can download it for free, but I had to switch my mom away from NeoOffice to LibreOffice because NeoOffice started nagging for payments to be able to download updates.
In fact NeoOffice is now in the Mac App Store for $9.99.

Similar Messages

HT201263 i have an iPhone 4. I forgot my passcode and can't access my phone. i tried to restore it, but halfway through the process iTunes stops working and a message pops up saying "iPhone cannot be access because it has a passcode" how am I suppose to r

how am i suppose to access my phone? PLEASE HELP

Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod Touch/iPhone/iPad). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

Best practices: Usage
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks fo

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide

hi,
somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
to find the ip, the easiest way i think is
start --> run --> cmd ->> ipconfig
Andrew
Message was edited by: Andrew Dicker

My iphone 3GS was updating to iOS 6. It stopped updating halfway through the process. Now my phone won't turn on. Endless bootloop.

My iphone 3GS was updating to iOS 6. It stopped updating halfway through the process. Now my phone won't turn on. Endless bootloop.

Hello Apple, is there anyone out threr?

My version of Lightroom 6 is still showing trial version after Serial Number has been Installed. I have tried re-installation but still have the same problem. Could you please forward a solution to this problem.

My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
I have tried re-installation but still have the same problem.
Could you please forward a solution to this problem.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I bought the movie "The Sky Crawlers" for 20 bucks, but halfway through the movie, it stoped. Now it won't play anymore!

I bought the movie "The Sky Crawlers" for 20 bucks, but halfway through the movie, it stoped. Now it won't play anymore! I really want to watch that movie, it's cool, but I Can't watch it anymore! Help?

The 3G iPod can only play SD video. Are you trying to sync the HD version?

Am trying to upgrade my itunes, and halfway through the process it says the older version of itunes cannot be removed

Am trying to install the latest version of itunes, as i need to get my new iphone up and running, halfway through the install it says the older version of itunes cannot be deleted. what do i do now?

Akeenleyside,
Are you removing your Apple software in an attempt to update to iTunes 10.5? I ask this because I am getting the same message when trying to install iTunes 10.5.

HT3986 I'm having trouble partitioning my hard drive, I'm attempting to do this from the recovery drive because it's more convenient. But when it gets about halfway through the process, there's an error message saying that it's having trouble unmounting

Just realized that the title was limited anyways, I'm in the recovery drive on my macbook pro, trying to partition my macbook with another user (not windows, just another user) with only like 10GB. It goes fine until it's about halfway done with the process, where it freaks out and tells me that it can't unmount the harddrive. Any suggestions?

Hi, BDAqua,
Nice to hear from you. You helped me with another recent question. Thank you.
The external case is Other World Computing's Mercury Elite Pro with Oxford chip set. Drive is an Hitachi deskstar 500 Gigabyte disk (I'll dig around for exact specs, if needed).
Weird thing is that the drive (partitioned into two disks, one boot, one for files) shows up in the Finder and in Disk Utility, but not in System Profiler. It's not visible at all there (not under Firewire, by which method it is connected, nor anywhere else). I can access its files, though, via Finder.
Very strange.

Just downloaded IOS 6 and it disabled my favorite game, Bubblets Tilt, and it won't let me reload this game I originally bought through the Apps store because it says it is no longer sold in the US. I tried to download off website and same. Help!

Just downloaded IOS 6 and it disabled my favorite game, Bubblets Tllt. Restarted and no luck. Tried to download new app and it is gone. Tried to download from website off Safari and message it is no longer sold in the US. Please help. Apple owes me for the cost of this app. Plus Google Maps is infinitely better and that the download kicking it off makes me want to buy an android. And I am not alone is resenting this meddling in my right to keep what I originally purchased. What are they thinking?

hi Bern
Firstly welcome to Crowd Support
The Australian Communications Industry Forum (ACIF) Credit Management code states that Telstra must perform s credit assessment when a customer is applying to us for credit.
For our Credit Assessments to be passed there are many factors of information considered to determine if the Credit Assessment is satisfied.
There are many reasons why a Credit application may be declined, and one of the most common is due to the new Customer not having any previous history with Telstra.
While this may be frustrating for you, in the circumstance of a Mobile Phone contract being involved, we really do need to be sure that we have the correct billing information, up to date contact details and also viability to pay bills on time.
There is a process where this decline decision can be disputed, and I would be more than happy to lodge this dispute for you if you could provide me with some information.
I will send you a PM so that we can work together offline to lodge this dispute.
Lindy

LiveCycle ES2 installation stops halfway through the process

Hi there!
I've installed LC ES2 before on my machine and normally without any problems.
Now I had to uninstall and install it again. So that I could do it from start, using turnkey, I even removed some items from Windows registry. This has worked before, more than once.
Now this is not working anymore. It always stops at the same place, roughly at 60% of the installation process. I wonder why. Some problem with Java?
Please, has anyone had this kind of problem before?
Thank you a lot for any hints!
Marcos

I am not sure why you would have to delete reg entries from windows, but i have a couple of questions:
Was this failure duing the install process, i.e. at any point during the install? If not, was it during the LCM process?
If it was during the LCM process, at what point did it halt: was it during DB initialization, or component deployment? (I figure the EARs configured ok, since you mentioned at about "60%".
If you could share the server.log exception and the LCM log exception, that would help.
Thanks,

I was renting a movie using iTunes on to my iPod. It downloaded perfectly. However halfway through the movie, a message appeared on my screen and said unable to load video. I've tried replaying it but it always stops at the same point.

Is there anything I can do

Contact iTunes and requirst a redownload
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

How can I display SQL%ROWCOUNT in the "Process Success Message"

Hi all;
I am trying to display SQL%ROWCOUNT in the "Process Success Message" of a custom update Process.
Any ideas?

Chris,
I assume,
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID );
is a package / procedure you call to do something. Change the procedure and add an
out parameter to it, which will get the
SQL%ROWCOUNT
value. Then, call this package like this:
DECLARE
in_DEPARTMENT_UID NUMBER;
BEGIN
in_DEPARTMENT_UID := :P4_DEPARTMENT_UID;
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID, :P4_ROW_COUNT );
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

HT201210 Everytime I restore my iphone there is always message popped says "there is error occured"? Why? Help me please!

Everytime I restore my iphone there is always message popped says "there is error occured"? Why? Help me please!

Did you try to use iTunes and the computer to download and install the update?
I did get this error trying to update using Wi-Fi only. After I connected to my computer and let iTunes download the firmware, the update went without problems.

I shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??

i shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??

Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

Is there a free version of an Mac Word that I can download. My previous computer was an HP and it was installed for free. I tried downloading it but halfway through the process, a message popped saying it is currently running in one of my programs.

Similar Messages

Maybe you are looking for