Is there a free way to send/receive faxes with a Mac?

efax is not a reasonble option anymore as it does not allow for Mac viewing software, so is there another way to send and receive faxes on a Mac (preferably for free).

"Thank you, the problem with eFax is they have not kept up with Mac Development so the new OS' do not support the viewers that eFax puts out and you can't read their file format without that.  You can open online, but you can't do anything with the fax after opening it, can forward, can save, etc..."
True, you can't use eFax software, however, I have asked them to send me the fax in pdf form and that works out just fine.

Similar Messages

  • Best way to send/receive invitations with Outlook users?

    I use iCloud with the Calendar app, but most of my colleagues inside and outside the company use Outlook on Windows.
    I have found that the invitations are tricky between the two systems.  When I send invites the person using Outlook gets a formatted HTML email with an Accept button but they don't know how to get it into their calendars.  Also when I receive invitations, I can accept them but its not sending back by acceptance status to the Outlook user.
    Are there any work arounds for this?
    Thanks

    They would either need to install iCloud on Windows or you could use a Google calendar that is widely used on Windows.
    I'm not sure how Outlook on Windows works with non Microsoft calendars.

  • Is there a way to send a fax from my MacBook Pro

    I would like to know if there is a way to send a fax directly from my MacBook Pro without using a fax machine?
    Thanks

    I bought this USRobotics modem from Amazon and I can both send and recieve faxes on my MBP.
    Works a treat - very easy to install and operate and I'm using it running Mountain Lion.
    Clinton

  • Is there any easy way to send free invoice via email without my credit info

    Is there any easy way to send free invoice via email without my credit info?

    Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

  • Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMe

    Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.

    Kolyei, sorry for the late reply.
    Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
    Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages.

  • HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.

    HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
    THANKS

    If you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
    [B]Follow these steps to Transfer photos from iPod to Mac[/B]
    Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
    Step 2. Connect iPhone with Mac
    Step 3. Hit "Photos" to scan photos from iPod to Mac
    Step 4. Click "Photos" button to transfer photos from iPod to Mac
    Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
    How to Transfer/Copy Photos/Pictures from iPod to Mac computer

  • Is there any free way to get music i lost back if it's not synced to my computer?

    is there any free way to get music i lost back if it's not synced to my computer?

    In a word. No.

  • Is there a free way to edit a pdf?

    I have a pdf file with personal information that I need to mark out and then share as a pdf.  Is there a free way to do this? Thanks in advance.

    Be aware that there are many ways to cover up personal information BUT DON'T DO IT. Many people, even people like the US Government, have done it, then found the information is still there and their secrets are out.
    To get rid of personal information you must use the function called "redaction". Don't do it any other way.

  • Is there a free way to get deleted notes back from ipad that had not been backed up

    Is there a free way to get deleted notes back from ipad

    As far as i know, there is a paid iPad notes recovery software to get deleted notes back even that had not been backed up.

  • Clear icloud important information, there is a way to send a request to Apple to see if there is any copy on your server?

    Clear icloud important information, there is a way to send a request to Apple to see if there is any copy on your server?

    Have you been syncing the iPod with iTunes? Then you just connect the iPad and set it up through iTunes and sync any content you want onto it.
    http://support.apple.com/kb/ht1386
    In terms of games/apps. If they are not universal (you will see a + symbol next to them) or made for iPad (you would see an HD in the name, usually) then they won't look good on an iPad as those apps will open in a iPod sized window, giving you the option to enlarge.

  • Is there a free way to convert a pdf file to a microsoft word file?

    Is there a free way to convert a pdf file to a microsoft word file?

    Adobe does not offer a free PDF to Word conversion. You may want to check out our ExportPDF service though. It's quite inexpensive: https://www.acrobat.com/exportpdf/en/pricing.html

  • No way to send/receive APDU to SmartCard Reader from W8.1?

    Hi everybody,
    with Windows Phone 8.1 you have the SmartCardConnection class through which you can send APDU to a smartcard (see below)
    private async Task sendApduToReader()
    string selector = SmartCardReader.GetDeviceSelector(SmartCardReaderKind.Generic);
    DeviceInformationCollection devices = await DeviceInformation.FindAllAsync(selector);
    if (devices != null && devices.Count != 0)
    SmartCardReader reader = await SmartCardReader.FromIdAsync(devices.First().Id);
    IReadOnlyList<SmartCard> cards = await reader.FindAllCardsAsync();
    if (cards != null && cards.Count != 0)
    SmartCard card = cards.First();
    //Here in W8.1 there is no ConnectAsync method and no SmartCardConnection class.
    SmartCardConnection connection = await card.ConnectAsync(); var responseBuf = await connection.TransmitAsync(SOMEDATA);
    In Windows 8.1 API there is no such class, so there is no way to send APDU to the smartcard.
    Is there any workaround?
    Many Thanks!

    Oops, sorry, misunderstand your previous question :)
    Yes, the API only works on Windows Phone 8.1 but not work on Windows Store App, and there seems no equivalent method that can do it. 
    I also found some comments from:
    http://channel9.msdn.com/Events/Build/2013/2-041#c635084018346669735, only Win32 applications can send APDU commends to SmartCardDevice.
    On the other side, if we want to make things ready, we need to create our own wrapper, I found an interesting blog that you can follow:
    http://www.codeproject.com/Articles/540839/Using-Smart-cards-with-a-Windows-Store-App
    Hope helps.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • E71 and send/receiving faxes

    Hello,
    I like to send and receive faxes with my canon pixma mx850 using the e71 so without any pc and without internet and any landline. Is there a way to do that? What software do I need?
    So the use cases are these:
    sending
    1. I put some documents in the sheetfeeder of the canon pixma mx850 allinone
    2. The scanned documents is sent to the e71
    3. The e71 is sending the faxes via gsm to another fax
    4. The e71 detects confirmation and that all is received and status is ok
    5. The canon pixma mx850 is creating a tx fax report with copy fax (the same as with landline faxing)
    receiving 
    1. If someone sends a fax to my e71 it is stored on my e71 and a status ok is send back to sender
    2. I can print the faxes when I connect to the canon pixma mx850
    So the only thing that should be different is that gsm radiowaves are used instead of copper wires. 
    The thought behind this is that I can cancel my landline subscription at my provider. The only reason that I have a landline is for sending and receiving faxes.  
    Grtz,
    Dave

    As for performing the fax function then I'm not sure if service providers are starting to phase that function out.
    I know it relies on a Fax type call in Circuit Switched Data, this function is now pretty much disabled by all service providers. I know O2 UK doesn't handle Circuit Switched Data anymore (at least for consumers)
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system?

    Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system? When I try to connect from my iMac I get a window that says "The version of the server you are trying to connect to is not supported." Is there a work-around to this problem or is it just not possible? It would be largly appriciated for a solutin beings my business is a small town newspaper, and we have some important files on the older computer that need to be acessed daily.

    Actually to share files between OS 8-9 and OS X, all versions, is quite easy from what I read. Look here for some details.
    http://reviews.cnet.com/8301-13727_7-20003464-263.html
    And here.
    https://www.google.com/search?q=file+sharing+Mac+OS+9.x&oq=file+sharing+Mac+OS+9 .x&aqs=chrome..69i57.20706j0j1&sourceid=chrome&ie=UTF-8
    Or since both OS 9 and OS X can do SMB Windows sharing you could use that protocol to share files from one to the other.
    Doesn't really matter what OS you are using. Mac OS/OS X shar files with Windows computers of all types and versions of Windows so the same applies for the different versions of Mac OS/OS X.
    Each Operating System takes care of reading and writing files to there respective file formats of the hard drives so that does not have to be the same. They both just have to be able to do Ethernet with the same files sharing protocol.

  • With Muti-clip gone from FCP X, is there a new way to sync two cameras with FCP X

    With Muti-clip gone from FCP X, is there a new way to sync two cameras with FCP X

    I film with two cameras then copy the files from each camera into their own folders. I then use ClipWrap to convert the MTS files into AIC.  If the recording was one long contiguous session, many cameras will split the MTS files into 2GB chunks.  ClipWrap will Convert Multiple to Span to reassemble them properly.  With the AIC .MOV file from ClipWrap, I then use FCP X to Import the MOV files from camera 1 and camera 2.  I prefer to do it that way versus using FCP X Import from Camera.  I then move the clip from camera 1 onto the timeline in the "primary storyline" (FCP X terminology).  I drag the camera 2 clip above the camera 1 clip and line up the audio from the two cameras while that audio is still attached to the video so everything stays in sync.  FCP X has a way to automatically sync two soundtracks, but I have not gotten around to that yet.  With camera 2's clip attached to camera 1's clip as a "connected clip" above the camera 1 video, I then do an edit to go between the cameras as seems best to me.  When the connected clip of camera 2 video sits above the camera 1 video, it will take priority over the camera 1 video.  I then split camera 1's video clip taking out sections when I want to go back to the camera 1 view. Of course I can trim camera 2's clips until I get it the way I want it.  Since FCP X uses the magnetic timeline concept, and camera 2's clip is "connected" to the camera 1 clip, as you split and trim camera 2's clip, everything will stay in sync across the two camera "tracks".  When there is no camera 2 video above the camera 1 video, camera 1 video will be seen.  When camera 2 video is above camera 1 video, camera 2 video will be seen instead.  With a single editing pass, I can then do all the editing I need to go back and forth between two cameras.  The same concept is expandable to other camera "tracks" as long as you are using vertical position in the timeline to determine which camera is seen when.  If you would like for it to look like a multi-camera track composit like before FCP X, you can simply select all your clips and make a compound clip out of it.  You will then see the multiple camera clips side by side in a single "track".  Double click on that "clip" in that "track" to go into the structure and editing individual "tracks" around if needed.  Think of a compound track as what a sequence used to do.  Anyway, there may be other, and easier ways to do this, but with a single edit through my recording, I can easily and visually cycle back and forth between camera views.  It's just that things are called differently now ... and, as of this time, we do not have a single button camera switching function to let us view multiple cameras simultaneously and switch between them using a keystroke for each camera.  Still, I have a way to do it, and it has worked very well for me, in fact I was pleasantly surprised at how easily I could do multi-camera in post.  Hope this at least gives you one option.  Others may have a better way.  Best wishes.
    stephen

Maybe you are looking for

  • Why can't I share word documents directly from Word to mail any more?

    Hi all I just wondered if anyone could help with this annoying problem. It is probably to do with Mail, but it manifests itself in MS Word (latest version, updates complete). I use to be able to share Word docs directly into Mail, using hte file>shar

  • Is it possible to delete the audio of a captured clip permanently?

    I know you can drag clips to the timeline without audio, or delete the audio from the timeline. What I'm asking is: say you captured a bunch of clips with audio tracks that you didn't want, because you forgot to uncheck the audio box. Is there some w

  • ECC5.0 not authorized for CRM connection

    Hi all, We are connecting ECC5 to CRM server. In ECC5, authorization test for CRM server fails in transaction SM59. But the connection test works fine in the same transaction. But from ECC6 IDES, connection to CRM is successful for the same way of co

  • Effects on Nike+ when receiving messages

    I went for a run yesterday. I started my workout and the sensor was detected when i started. A little more than half way through I noticed that it was no longer tracking any distance or pace info, but the music was still playing. It has never done th

  • HT1338 How can I resize my photo in iPhoto?

    I need to be able to resize my photos while using iphoto. But if I go to view the selection photo size is not available.