Is there a guide for iCloud?

iCloud is very confusing on how it has been implemented.  We have 4 devices in our household.  My wife has an ipad and an iphone and I have teh same.
Up to this point, we have always used my apple ID to buy music, apps, music, etc.  I upgraded everything to new IOS and on 3 of the 4 we used my apple ID.  On the 4th my wife put in her gamecenter id. 
So, my question is, should she be using her own apple id for icloud?  If we do that, the find my iphone feature in icloud is worthless because then I cannot use it to see her devices (I know where mine are).  Also, how can we then share calendars (that was one of the features touted in the keynote).  How do we then share the music, apps and movies?
I also have a @me email address and cannto figure out how to port that over to iCloud.  I was forced to create a new ID.
Is there a guide to iCloud anywhere?

iCloud Help is the best place to learn about how to use all the features of iCloud.
It is available by going to http://www.icloud.com/ and clicking Help.
But, iCloud isn't really designed as a business-level service. It's more for keeping personal data in sync between personal computers and iOS-based mobile devices.
Have a read through the Help, and also the iCloud web-pages below and see if you think it will do what you're hoping it will.
http://www.apple.com/icloud/
Also, the iCloud specific forums start here: https://discussions.apple.com/community/icloud?view=overview
You might find this link useful too: http://www.apple.com/ipad/business/

Similar Messages

  • Are there updated guides for Lookout 6?

    Is there an uodated "Getting started" guide, "Evaluation" guide or "Object Reference" guide for Lookout version 6.x?
    I found these ones, but could not find any newer version.
    Getting Started with Lookout, Ver 4.5,
    Edition Date:  
    November 2000
    Part Number:  
    322389B-01
    http://digital.ni.com/manuals.nsf/websearch/155149B1BAC11819862569850066E067
    Lookout Object Reference Manual, Ver 4.5
    Edition Date:   November 2000
    Part Number:   370010C-01
    http://digital.ni.com/manuals.nsf/websearch/2B8B7A95AC9CE7638625698500645E93
    Lookout Evaluation Guide, Ver 5.0
    Edition Date:   June 2003
    Part Number:   350379E-02
    http://digital.ni.com/manuals.nsf/websearch/54ABE64DECEEE43386256D43006E8466

    I'm afraid there are no updated manuals specifically for Lookout 6.x, because Lookout 6.x doesn't have big changes against 4.x and 5.x.  The objects, the way how to use objects, the "Getting Started Guide" are almost the same in 6.x.
    Ryan Shi
    National Instruments

  • Is there a user guide for iCloud?

    Questions occur to me all of the time, it would be nice to have a convenient source of answers. Here are a few examples: how will iCloud deal with the other email addresses I set up in MobileMe? Will @me.com go away? How do I create folders in iCloud? How can I get to iCloud from my iMac, other than by logging onto iCloud? When I'm logged into iCloud via Safari how can I see the contents of the Documents area. I've had many others; I may have forgotten some really good ones.

    You may find these Links of Value...
    iCloud Help
    http://help.apple.com/icloud/?lang=en
    iCloud FAQs
    Creating an iCloud account: Frequently Asked Questions

  • Is there a way for iCloud to monitor subfolders for the Photo Stream?

    I have created a folder on my hard drive called Photo Archive and it has subfolders based on year and further subfolders based on month and a further subfolder for the day.  I have pointed iCloud to the 2011 subfolder for the Upload folder.  I noticed tonight when I downloaded photos from my SD card and they went into the proper subfolders based on date that they did not show up in my Photo Stream as I expected.  To think a person would just upload all photos into one folder and not sort by date seems like an organizational nightmare and make it difficult to find photos based on date.  In a year I can take over 10,000 pics so I'm hoping there is a solution to this.
    Thx in advance.

    In short, out of box no, but is possible.
    Solution 1: Hosted on BC, external interface that interfaces with BC API, requires external hosted server.
    Solution 2: Wait until v3 of the API comes out... no timeline from Adobe given. This would remove the need for the external API server.
    Can do both solutions for you but solution 2 wont work until adobe allows it.

  • Is there a guide for a newbie?

    is there anywhere where it explains how to get connected once you download the software from my cd
    after i download the software i was connected to the web after that it really does say how to get connected how the usage is used up.
    we have a user guide, but really only shows u how the hub doesnt work, does explain indepth details how to get connected or how to would u keep the hub going> to keep it on to turn it off? to turn off wireless to keep it on etc etc?
    it there is such a way pls show me the way?
    should u have stickies about a newbie guide to do all the things that ppl take for granted?

    Violetvi wrote:
    too late for that i used the cd already
    When prompted for the passowrd, enter the one on the label on the hub. (thats only one time) I can change that in Hubmanagerment,
    Thats the Hub Management password and the first time you enter the Hub management pages you will be promted to set up a new one.
    BTopenzone connects when I disconnect from my BTHub internet line, BTopenzone connects Im not charged for that?
    No you are not charged, but there is NO need to disconnect your wireless. Just close your web browser window or shut down your computer.
    on that part of my BThub it will say
    name (my bt hub name)
    signal strength; excellent
    security type; WPA2 -PSK
    radio type:802.11n
    So im gathering that my security on it is WPA2-PSK that is lockdown for my only use only.. No-one can access my wireless connection only on my computer...?
    Correct, as long as you don't give them the wireless key, which unless you have changed it is on the labels on the HUB
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • Is there a guide for installing an OS into an LDOM without netbooting?

    I have been looking for an install guide that specifically mentions how to install into an LDOM without jumpstarting. There are a few hints about mounting an ISO, but that has not worked for me. I am using a T2000, with Firmware 6.4.6 and LDOM 1.0 software.

    Installing from an ISO/DVD is possible with OpenSolaris - snv_77 or later. The support will also be in S10U5.
    See this thread for more details: http://www.opensolaris.org/jive/thread.jspa?threadID=49961&tstart=15

  • Is there a guide for starting coldfusion development on Ubuntu?

    I have successfully installed coldfusion on Ubuntu 13.10, but as a newbie to Ubuntu I am looking for a guide on the best way to continue from here?
    For example, I can view the CFADMIN at "http://localhost:8500/CFIDE/administrator/index.cfm", but am having difficulties viewing test documents placed in the wwwroot folder.
      Wayne

    Dear Anit
    Thank you so much for all the help!  The general guide on the differences immediately solved one problem once I changed the name of "application.cfm" to "Application.cfm"
    I am far from a "power user", but am enjoying the learning process.  Inevitably I find that most of my encountered problems are associatied with permissions.
    For a few brief years I was a cf developer, but now work in the tennis field at a large club.  I developed an application which saved me hours and hours of work, and this application has become a key element in the whole summer program.  Unfortunately, after migrating to CF10 from CF9 I can no longer connect to smtp.gmail.com (after hours and hours of searching for a work-around).  Luckily I still had the same application on an older laptop, which was using CF9 ... and so I was still able to work as I wanted.
    I decided to partition my new laptop to see if CF10 would work as I needed on Ubuntu.... which explains my intial posting.
    I am very happy to report that, with your help, I have had success.  For the record this is what I did
    after installing Ubuntu I followed this great guide:  http://www.howtoforge.com/installing-apache-and-coldfusion-9-on-ubuntu-9.04 (of course installing the downloaded CF10 and not CF9)
    BUT, the apache connector didn't work for me. (this was before the above posting of Anit's ... and as a Ubuntu newbe I couldn't see any way forward)
    so I uninstalled coldfusion and reinstalled ... as a standalone server
    no problem at all viewing the CF Admin page
    after installing and running msql, I imported my club database and application files
    not a problem creating the appropriate datasource within CF Admin
    BUT, I couldn't view my application in a browser after moving it to the "wwwroot" folder
    finally I (fortuitously) changed the permissions on this application folder so that I had appropriate rights ... which had a GUI allowing me to do so, otherwise I think I never would have done it alone!
    Immediately I could view index.cfm, but then I would have a DATASOURCE error when I drilled down
    Once I saw that "application.cfm" had to have a capital "A" i.e. "Aplication.cfm" everything worked
    went to "mail" under CF Admin. Verifying my mail server was at first annoying.  Port 465 with TLS checked didn't work ... but then port 587 verified!
    a test email to myself using my application in the browser proved successful...yay!
    If at first you don't succeed, try, try again!
    Again Anit, thank you for your help!

  • Is there a guide for optimizing the Airport?

    http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf
    Message was edited by: 11201ny

    thanks, yes there is a guide or guides.

  • IS THERE ANY GUIDE FOR DOING CUSTOMIZATION SPECIALLY FOR WORK CENTRE.

    HOW TO CREATE WORK CENTRE CATAGARY PLEASE TELL ME NO BODY IS HELPING ME

    Please Check the following sites -
    http://www.easymarketplace.de/online-pdfs.php
    www.sap-img.com
    www.sapsuperusers.com
    The above sites have good information which can help you.
    Use the following Path -
    SPRO --> Production Planning for Process Industries --> Master Data --> Resource --> General Data --> Define Resource Categroy
    Hope this may help you.
    Reward Points if useful.

  • Is there a guide for building adobe air apps for different languages?

    Hi,
    I´m not a programmer and I want to build some of my apps in different languages.
    I use Flash cc 2014 AIR 15 and I´m interested right know on Android apps.
    Any help will be appreciated.

    If someone can help me on this issue I will be very grateful. I´m not a programmer so I don´t know where to begin.

  • Is there a user guide for iFog?

    is there a user guide for iFog?

    Julian,
    iFog is not MY factious term for iCloud.  It's a term that is used by many people who are frustrated with iCloud. I frequently hear it in every coffee shop in Cupertino. 
    Regarding your statement about the "link to the User Guide for iCloud available from every page of the iCloud website by clicking the Help link or the ? icon." that raised another interesting question.  Yes, I see the ? on the top page of the iCloud site.  If I go, for instance, to the Contacts page, and do a Safari search for 'help' it reports one occurrence, but highlights none.  Thinking I might not be seeing the highlighting, I search for the single letter 'h'.  Safari search reports six occurrences of 'h', but as I click through the forward/back search arrows, the 'h' in the word home is, and stays highlighted.
    If you are correct that there is a link "from every page of the iCloud website," those links may for some reason be hidden on my system -- using the MacBook now. Nevertheless, they are not accessible.
    Unfortunately, my contacts have all disappeared from two of my machines again.  The Contact help that I did find said to go top Apple>System Preferences>MobilMe, which no longer exists. <sigh>
    But thanks for your help.

  • A guide for unlocking cores

    This may be an old topic but I am new to doing anything with core unlocks.
    I will provide my specific 800 series board ident shortly.
    My question is:  is there a guide for doing this at the Forum or elsewhere?
    Are there other materials such as BIOS mods that may be needed as downloads from MSI or  here at MSI HQ?

    On the boards allowing this feature (so long as there are cores to be unlocked on the cpu) it is a simple bios setting in oc section to be enabled. If there is no such setting no core unlocking.

  • Support for iCloud under Snow Leopard

    Will there be support for iCloud
    under Snow Leopard?

    Its not really support for icloud,  but you can successfully sync icloud calendar to ical in snow leopard.
    http://skangerland.blogspot.com/2011/10/how-to-get-ical-with-icloud-working-in.h tml
    It's working for me syncing both ways between iphone iOS 5.1 and OSX 10.6.8 / iCal 4.0.4

  • I have deleted hundreds of pictures, I've deleted apps, deleted emails and texts, and I've turned off and deleted backups of apps on icloud and it is still telling me that there is not enough icloud storage available for my phone to be back

    I have deleted hundreds of pictures, I've deleted apps, deleted emails and texts, and I've turned off and deleted backups of apps on icloud and it is still telling me that there is not enough icloud storage available for my phone to be backed up. I am supposed to do this before I go to the Apple store today to get my phone fixed. Can someone please help me? I have done almost everything.

    This article explains ways to reduce your iCloud storage: Managing your iCloud storage.  In addition to what's mentioned in the article, if you have lots of photos and videos attached to your text messages, these are all included in your iCloud backup and deleting them can sometimes significantly reduce the size of your backup.
    If worse comes to worse, back up your phone to your computer rather than iCloud.  To do this, connect it to your computer, open iTunes and go to File>Devices>Back Up and to File>Devices>Transfer Purchases.  This can be used to restore your data when you get your phone back.  (In fact, it's faster because you don't have to download the data from iCloud.)

  • HT4759 I want to use icloud mail on both iPhone 4s AND my pc. icloud mail on PC is mega glitchy and frustrating because my PC is ancient, I run XP, & these DO NOT MEET req's for iCloud.  Is there a email platform that will run well on both XP and iPhone?

    I NEED to use icloud mail on both iPhone 4s AND my PC. I need to use both. 
    Trying to use icloud mail on PC is mega glitchy (STOP SCRIPT WARNINGS EVERY FEW MINUTES) and frustrating because:
      1.  my PC is ancient (but nicely refurbished/fast)
      2.  I run XP  (with both Firefox and Chrome- newest versions)
      3.  thusly, I DO NOT MEET SYSTEM REQUIREMENTS for iCloud.
    In my passed attempts I found that
    1. Yahoo doesn't work well on iPhone
    2. Gmail doesnt work well on iPhone.
    I must be missing something... an app or... maybe a donated/ NEW FREE MAC!  (That would be sweet!  Ha.)
    Is there an email platform that will run well on both XP and iPhone?
    or... Please say it isn't true: I would love a Mac tablet or desktop. We have no money for a mac. SOL?   Is this iCloud apple tech only for wealthy middle class and above who can afford to have the newest and best of everything? 

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

Maybe you are looking for

  • YouTube once accessed, then gradual iTunes shutdown & iPad slowdown

    Seems to be a popular issue lately, so I assume apple is working on it. My account: First noticeable issue was when accessing YouTube to watch a clip from the DNC, & it took forever to play. One month ago I downloaded the first GOT season to see if i

  • How do I get an image to follow the cursor on an applet?

    I'm trying to create a applet which has a bullseye on it and when the cursor moves across it the image(bullseye) follows it but I have no idea how to do this. I know I have to use the mouseMoved event. Also how do I have a JPanel covered by a image?

  • HT201317 Manually adding photos to Photo Stream

    I've manually added photos to the upload photo from my windows desktop but they are not appearing on my iPhone's Photo Stream.  I think I have everything set up and turned on correctly...

  • Bank Account Sttaus showing as "." instead of Submitted

    Hi, I created a bank account in AP Italy and saved the record. The status should be submitted but instead there is a "." So it cannot be approved.Can any profile setting to checked? Kindly any help will be needful for me Thanks and Regards

  • Automatic AV Remediation

    We're working with Cisco ISE 1.3.0.876 and NAC Agent with posture policies and we need a remediation that automatically send to the Symantec Endpoint Protection server that's locally. How can we do that?