Is there a guide for installing an OS into an LDOM without netbooting?

I have been looking for an install guide that specifically mentions how to install into an LDOM without jumpstarting. There are a few hints about mounting an ISO, but that has not worked for me. I am using a T2000, with Firmware 6.4.6 and LDOM 1.0 software.

Installing from an ISO/DVD is possible with OpenSolaris - snv_77 or later. The support will also be in S10U5.
See this thread for more details: http://www.opensolaris.org/jive/thread.jspa?threadID=49961&tstart=15

Similar Messages

Locate Quick Guide for installing Retail

I am following a SAP Best Practice (Building Block Configuration Guide ) but I am unable to obtain the Quick Guide for installing Retail located on the DVD in Retail_US\Documentation\Retail_Quick_Guide_EN_US_V1603.doc
Our DVD has been damaged, I have been looking on SERVICE Market place etc but can not find it. If it is there THEN please help me locate it and I will get it from there.

Hi Jack,
Good news for you.
Please login to SAP Marketplace
And search for the SAP note: 1242830
In the attachments, you will find your file "Retail_Quick_Guide_EN_US_V1603.doc" in .zip format.
Right click and save.
It will solve your purpose.
Else you may have it from me.
Take Care
Regards,
Anirban Roy

The step-by-step guide for installing the Oracle Database and Oracle9iAS Portal

All,
I made a step-by-step guide for installing the Oracle 8.1.7 database and Oracle9iAS 1.0.2.1 (HTTP Only) install on a 'clean' Windows 2000 machine. The guide has a screen shot of every single step that I went through to get an installation of the database and Oracle9iAS Portal to work.
Because I left my email in the guide, everyone will be sending me email with questions about their particular install. [What I really wanted was some positive feedback email to show to my manager... hint hint.] As I do not want to troubleshoot everyone's install by email, I started this thread.
Let's start the step-by-step install guide discussion here.
As a start, here is what I did NOT want to do with the guide: I did not want to 'redo' the current Oracle9iAS installation guide. So I did not put any conditions in the guide. This is just what I had to do to take a clean Windows2000 machine (no Oracle software on it) and get it to work. If I keep on adding conditions, eventually I will end up with the installation document.
Also, in the next version (for the Oracle9iAS 1.0.2.2) I will probably start over again from scratch as we are planning on addressing some of the issues with the install.
Another thing I plan to do is put the following direct links in:
Oracle9iAS Portal: Troubleshooting Guide
Oracle9iAS Portal: Diagnostics Tool
Oracle9iAS Portal: FAQ
Have a look at the above, as they will answer probably all of your questions... But if not post away!
Thanks,
Rich

We do have installed a Lotus Notes LDAP. Unfortunately, the documentation is company internal in German.
The steps, in general, where:
1) Create physical connection (obviously, you did that)
2) Deploy the XML Descriptor for the LDAP under "UM Configuration => Data Sources"
We used a derivate of the Sun One LDAP Profile.
3) Match the assignement LDAP Group --> EP Role --> EP User via EP user management
4. The user, in our case, is always created in the LDAP first (from a different LDA administration group) and is then visible in the Portal)
I know, this is very generic, but the "magic" is in the XML profile and I haven't seen any documentation about it yet.

I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!!

I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!! But if there is a way that they could get in and take over my phone with a new number without me deactivating the iPhone and activating a different phone with my number.

lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
Did you try to localise it ?
But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number.

Is there a guide for iCloud?

iCloud is very confusing on how it has been implemented. We have 4 devices in our household. My wife has an ipad and an iphone and I have teh same.
Up to this point, we have always used my apple ID to buy music, apps, music, etc. I upgraded everything to new IOS and on 3 of the 4 we used my apple ID. On the 4th my wife put in her gamecenter id.
So, my question is, should she be using her own apple id for icloud? If we do that, the find my iphone feature in icloud is worthless because then I cannot use it to see her devices (I know where mine are). Also, how can we then share calendars (that was one of the features touted in the keynote). How do we then share the music, apps and movies?
I also have a @me email address and cannto figure out how to port that over to iCloud. I was forced to create a new ID.
Is there a guide to iCloud anywhere?

iCloud Help is the best place to learn about how to use all the features of iCloud.
It is available by going to http://www.icloud.com/ and clicking Help.
But, iCloud isn't really designed as a business-level service. It's more for keeping personal data in sync between personal computers and iOS-based mobile devices.
Have a read through the Help, and also the iCloud web-pages below and see if you think it will do what you're hoping it will.
http://www.apple.com/icloud/
Also, the iCloud specific forums start here: https://discussions.apple.com/community/icloud?view=overview
You might find this link useful too: http://www.apple.com/ipad/business/

Is there a package for installing the FlexNet service only?

Hi,
we are trying to virtualize Acrobat Pro 9 using Softgrid/App-V. Unfortunately the FlexNet service does not support virtualization. According to the virtualization community a possible workaround would be a local installation of the FlexNet service on our terminal servers.
To do that I need an installation package for the FlexNet service only or command line parameters for installing the service from the normal package without installing acrobat.
Is such a package or command available somewhere?
Thanks!

There is no standard iView for ME53N, but you can create you own iView which will point to any SAP Transaction in either WinGui or WebGui Mode and assign it to end users.
Refer to the following standard SAP help:
[http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]
Regards,
Trikanth Basetty

How To Guide: for installing Content DB 10.2 on 3 hosts

Hi,
Could you please tell me if it's possible to access a step by step guide instructions for installing Content DB 10.2 on 3 hosts:
one host for --> AS Infra R2 (10.1.2.0.2)
one host for --> Oracle Database 10.1.0.5 or 10.2.0.2
one host for --> Content DB 10.2
On other hand, is it required to apply 10.2.0.2 Patch Set on Oracle Database 10.2.0.1
for Content DB 10.2 installation?
Great thanks in advance for any of your advices.
Best regards.

Metalink may contain some NOTEs detailing the end-to-end steps to install Content DB.
For Database install on Linux, http://www.puschitz.com/ has some great guides.
Content DB will install against any 10.2.x database.
It is worth while patching the 10g database home software to the latest patchset release prior to actually creating the database. This will save considerable time in comparison to applying any patchsets post database creation (and Content DB integration).
thanks
-Matt.

Where i can find an installation guide for installing on x86 ?

Hi
Thank you for reading my post
where i can find step by step installation guide to install Solaris on an x86 computr which has a windows ?
also does it works with SATA HDDs ?
How about boot loader ?
Thanks

Follow this link
http://www.sun.com/bigadmin/content/unoff_install

Are there updated guides for Lookout 6?

Is there an uodated "Getting started" guide, "Evaluation" guide or "Object Reference" guide for Lookout version 6.x?
I found these ones, but could not find any newer version.
Getting Started with Lookout, Ver 4.5,
Edition Date:
November 2000
Part Number:
322389B-01
http://digital.ni.com/manuals.nsf/websearch/155149B1BAC11819862569850066E067
Lookout Object Reference Manual, Ver 4.5
Edition Date:   November 2000
Part Number:   370010C-01
http://digital.ni.com/manuals.nsf/websearch/2B8B7A95AC9CE7638625698500645E93
Lookout Evaluation Guide, Ver 5.0
Edition Date:   June 2003
Part Number:   350379E-02
http://digital.ni.com/manuals.nsf/websearch/54ABE64DECEEE43386256D43006E8466

I'm afraid there are no updated manuals specifically for Lookout 6.x, because Lookout 6.x doesn't have big changes against 4.x and 5.x. The objects, the way how to use objects, the "Getting Started Guide" are almost the same in 6.x.
Ryan Shi
National Instruments

HT204053 My wife and I just bought iPhone's, we use to share an account under one Apple ID, is there a way for one of us to share music without sharing the same Apple ID?

We use to have multiple iPods, now we both have iPhones. When she wants to FaceTime with relatives she has to use my Phone because that's where the Apple ID is "tied" to. Now if we want to FaceTime each other it gets weird.
We share similar taste in music so the music is not the problem.
I'd just like her to have her own Apple ID for FaceTime, apps, etc.
is this possible?

Sorry... Apple IDs cannot be merged...
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37

Installing OS into an LDOM without network?

I am in the process of evaluating LDOMs at my company. I have a loaner T2000 with two disks and would like to configure 4 LDOMs, so using a whole disk is not an option. The system has limited network connectivity and no SAN. By the documentation, Jumpstart is not an option to install the OS on new LDOMs. Nor can I boot a DVD directly.
So, I sliced my second disk into four equal partitions and gave one to each LDOM when I configured them. I thought I was ready to install... so here comes the challenging part:
I attempted to boot a Solaris 10 11/06 DVD image file through loopback as a virtual disk. The kernel panicked almost immediately when attempting to mount the root filesystem.
So, I used dd to extract slice 1 from the DVD and put that as a virtual disk via loopback. I booted the kernel with -a from the DVD image and specified the root filesystem as my new loopback device. This got me a running kernel and the system booted up until the point where a few services failed to start and left me in a loop where the system complained about being unable to execute sulogin, attempted to go to maintenance mode, unable to execute sulogin, etc.
I'm starting to think that I am going about this task in the completely wrong way... but almost all the documentation I have read has suggested using a whole disk and doing a network install, which is not an option for me.
So, going under the assumption that the only network connectivity I have is between the T2000 and some non-*nix laptop, how do I get an OS onto a LDOM?

Hi,
You can make use of virtual disk images. But you'll need to setup jumpstart to get your domains running. Check out my blog at http://unixconsole.blogspot.com for details.

Guide for installing and tuning a Vista 64 PC

Yes, I'm going to tax your patience again. This is a guide to setup Vista 64 for NLE work, well it actually applies to any kind of work, but NLE machines may profit more than an Office/MSN machine. One caveat: What I suggest here is a lean and mean machine that is mainly dedicated to NLE work.
First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one.
After installation has completed, first select Control Panel and Personalize. Select Change Desktop icons and ensure that at least Computer is selected. You can choose other icons as well if you want to. I have all 5 selected.
Next check Device Manager (right click This Computer, select Properties and then Device Manager) that you have no problems with drivers for any of your hardware. If there are any yellow exclamation symbols, solve these issues first by having Vista search for drivers and if it comes back with the message that no drivers could be found, get the latest 64 bit driver from the internet for this device.
Once Device Manager has no more problems, go to Windows update and install all critical updates. Nothing more at this moment. After installation and rebooting, again check Device Manager for problems. There should be none. Otherwise get on the internet again and reinstall the latest Vista 64 drivers. Next right chick This Computer and select Manage and go to Event Viewer. Open the Windows Logs and click on System. Scroll through the events and check out any errors or warnings you see. Search the Microsoft Technet for solutions. This is the link to the very informative Technet site to help you solve any issues you may have: Microsoft Technet
Next go to Control Panel, select Programs and Features and select turn Windows features on or off. You may not need anymore than these Windows Features and possibly less, for instance if you don't use a network printer. Also this may be a good moment to turn off User Account Control via Control Panel/Security Settings.
Next go to Vista Services and use the instructions and the table shown to modify the services, so only those are started that are needed in your situation. Anything not needed will only increase boot time and will consume resources, placing a higher overhead on the system than needed.
After rebooting, update all your drivers if you have not already done so. For instance, if you have an ATI card, download the latest drivers, but remember you can do without the Catalyst Control Center. Their drivers are typically denoted by y.m (year, month) so currently the latest is version 9.5
Now go to Control Panel, System and select Advanced system settings, select Visual Effects and select Adjust for best performance, apply and then select the Advanced tab, click on Performance settings, select the Advanced tab, Select Adjust for best performance of programs and then change the Virtual memory. Setup your pagefile with a custom size with equal numbers for Initial and Maximum size on another drive than your C disk and set the C drive to No paging file. If you have read my Storage rules for an editing rig guide, you know you need a fixed size of around 1 to 1.5 times installed memory, unless you have lots of RAM, then you can easily go lower.
Reboot and right click on This Computer, select Manage and select Disk Management. Select drive C, right click Properties and make sure that Index this drive for faster searching and Compress this drive to save disk space are both turned off. Click Disk Cleanup and clean what can be deleted. Repeat these steps for all of your drives. Next go to the Tools tab and select Defragment Now and defrag all drives. While you are at the Disk Defragment window, setup a daily defragging schedule, for instance during your lunch break. That will keep your disks optimized.
This will make sure that the space previously occupied by the pagefile on the C drive is reclaimed and that the new pagefile on another drive is not fragmented and at the very beginning of the drive in the fastest location (at least if the disk was newly formatted and not used).
If you haven't done so yet, completely turn off the Sidebar and do not have it autostart.
No application has been installed yet, so it is time to start with some essential utilities.
The first thing I do is turning off Windows Defender and install Symantec Endpoint Protection.
Next I install Ccleaner. A very handy freeware tool to keep your system and the registry clean and to remove or disable registry based auto startup programs.
The next one to install is the Sysinternals Suite and most notably Process Explorer, Process Monitor and Autoruns. Depending on your use, other utilities in the Suite may be nice to install as well. Installation is done by extracting the relevant files to the C:\Windows directory. Run Process Explorer once and in the Options menu select Replace Task Manager.
Other utilities I install (but of course you may have different favorites) are Beyond Compare, HWMonitor, SpeedFan, SnagIt and 1ClickPCFix
You are now ready to install your regular software. After installation, registration and activation of all your software use Ccleaner, Tools to check for unnecessary Startup entries in the registry. Disable or remove them. Next check your registry by scanning for issues and fix selected issues. Defragment all your disks again and make a restore point.
If you want to get rid of the ridiculously large shortcut arrow at this moment, go to this site: Remove Shortcut Arrow and follow Method 1.
Reboot and you are ready to go with a hopefully much faster and efficient Vista machine.
If you encounter difficulties and have problems that want to ask about on the forum, be prepared to include a screenshot from Process Explorer and either HWMonitor or Speedfan and a link to DXDIAG.txt
Thanks for your patience and I hope you have found some tips and tricks to improve performance.

Quoted from Harm's original post:
"First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one."
I guess I started off on the wrong foot. I just restored my computer to factory condition, which includes a partitioned "Factory Image" which enabled me to restore the machine. Should I be concerned with this? The system drive is actually a 2-drive RAID 0 from factory.
Could I have done this differently?

Is there a workaround for installing Windows 8 on a Mid-2010 Macbook?

Hi there!
I've been digging and digging and digging trying to find a work-around for this issue I'm having. I bought Windows 8 without first checking to see if my Macbook would be compatible with running both OSX and Windows 8... Stupid move #1 because it's not supported in the mid-2010 Macbooks.
I have found a couple slightly outdated threads about how you can edit your plist file in the Boot Camp contents folder but every time I have tried this, Bootcamp crashes. Fortunately for me I kept a backup of the plist file so Bootcamp is in fact still working at this point but I obviously can't install Windows 8 still. (Ignore my last comment in the thread, I fixed it)
I have expanded my Macbook to a 1TB H-SSD and it has 8GB of RAM. I SHOULD be able to run Windows 8 and I'm pretty upset that I can't at this point.
Here is the previous thread: https://discussions.apple.com/thread/5164969 (Ignore my last comment in the thread, I fixed it)
I'm thinking I can probably still get around my issue by using the plist file I just don't know anything about how that kind of stuff works.
Anyone have any suggestions?

You could look into the specs required to use Parallels or other
virtualization VMware Fusion to see what they require to work.
They too may be unable to support Windows 8.x version if the
hardware in the computer is not capable of running it. So the
answer may be to look for an older Windows, due to hardware.
http://www.parallels.com/products/desktop/
http://www.vmware.com/products/fusion
•Apple - Support - BootCamp:
http://www.apple.com/support/bootcamp/
Not sure if some tweak to BootCamp is the answer to hardware.
A change to a preference file (plist) may not be an answer there.
There may be a way in Terminal to modify how some things work;
but that is a topic outside a basic MacBooks/BootCamp discussion.
You may look into the BootCamp topics to see if someone has a
similar inquiry posted there.
Good luck & happy computing!

Is there a guide for starting coldfusion development on Ubuntu?

I have successfully installed coldfusion on Ubuntu 13.10, but as a newbie to Ubuntu I am looking for a guide on the best way to continue from here?
For example, I can view the CFADMIN at "http://localhost:8500/CFIDE/administrator/index.cfm", but am having difficulties viewing test documents placed in the wwwroot folder.
Wayne

Dear Anit
Thank you so much for all the help! The general guide on the differences immediately solved one problem once I changed the name of "application.cfm" to "Application.cfm"
I am far from a "power user", but am enjoying the learning process. Inevitably I find that most of my encountered problems are associatied with permissions.
For a few brief years I was a cf developer, but now work in the tennis field at a large club. I developed an application which saved me hours and hours of work, and this application has become a key element in the whole summer program. Unfortunately, after migrating to CF10 from CF9 I can no longer connect to smtp.gmail.com (after hours and hours of searching for a work-around). Luckily I still had the same application on an older laptop, which was using CF9 ... and so I was still able to work as I wanted.
I decided to partition my new laptop to see if CF10 would work as I needed on Ubuntu.... which explains my intial posting.
I am very happy to report that, with your help, I have had success. For the record this is what I did
after installing Ubuntu I followed this great guide: http://www.howtoforge.com/installing-apache-and-coldfusion-9-on-ubuntu-9.04 (of course installing the downloaded CF10 and not CF9)
BUT, the apache connector didn't work for me. (this was before the above posting of Anit's ... and as a Ubuntu newbe I couldn't see any way forward)
so I uninstalled coldfusion and reinstalled ... as a standalone server
no problem at all viewing the CF Admin page
after installing and running msql, I imported my club database and application files
not a problem creating the appropriate datasource within CF Admin
BUT, I couldn't view my application in a browser after moving it to the "wwwroot" folder
finally I (fortuitously) changed the permissions on this application folder so that I had appropriate rights ... which had a GUI allowing me to do so, otherwise I think I never would have done it alone!
Immediately I could view index.cfm, but then I would have a DATASOURCE error when I drilled down
Once I saw that "application.cfm" had to have a capital "A" i.e. "Aplication.cfm" everything worked
went to "mail" under CF Admin. Verifying my mail server was at first annoying. Port 465 with TLS checked didn't work ... but then port 587 verified!
a test email to myself using my application in the browser proved successful...yay!
If at first you don't succeed, try, try again!
Again Anit, thank you for your help!

Is there a guide for a newbie?

is there anywhere where it explains how to get connected once you download the software from my cd
after i download the software i was connected to the web after that it really does say how to get connected how the usage is used up.
we have a user guide, but really only shows u how the hub doesnt work, does explain indepth details how to get connected or how to would u keep the hub going> to keep it on to turn it off? to turn off wireless to keep it on etc etc?
it there is such a way pls show me the way?
should u have stickies about a newbie guide to do all the things that ppl take for granted?

Violetvi wrote:
too late for that i used the cd already
When prompted for the passowrd, enter the one on the label on the hub. (thats only one time) I can change that in Hubmanagerment,
Thats the Hub Management password and the first time you enter the Hub management pages you will be promted to set up a new one.
BTopenzone connects when I disconnect from my BTHub internet line, BTopenzone connects Im not charged for that?
No you are not charged, but there is NO need to disconnect your wireless. Just close your web browser window or shut down your computer.
on that part of my BThub it will say
name (my bt hub name)
signal strength; excellent
security type; WPA2 -PSK
radio type:802.11n
So im gathering that my security on it is WPA2-PSK that is lockdown for my only use only.. No-one can access my wireless connection only on my computer...?
Correct, as long as you don't give them the wireless key, which unless you have changed it is on the labels on the HUB
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Is there a guide for installing an OS into an LDOM without netbooting?

Similar Messages

Maybe you are looking for