Is there a "hide" feature in Indesign CS4?

Is there a "hide" feature in Indesign CS4?
A bit frustrating to select items that is at the bottom of the stack. Unless layers are used or I lock the object. How else can I select something that is behind other items?
Thanks

What Bob said, and use those those layers, too. That's why they put them there.

Similar Messages

Is there a "wireframe" preview in InDesign CS4?

Is there a "wireframe" preview in InDesign CS4?
Coming from using Illustrator most of the time...

No.
Bob

You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.

In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again.

Importing xml with xslt in InDesign CS4

Hello All,
i need someone's help who's an expert at xml and xslt features of InDesign CS4.
i work in publication, besides our magazines we produce yearbooks with lots of repetative information fields in them. we get the data in xml fromat which we flow in to InDesign. the xml files are very simple, here's an example:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<Root>
<Story>
      <Country> Afganistan </Country>
<Company_ID>
   <Company_Name> Kam Air </Company_Name>
   <Company_Code> 1 </Company_Code>
   <Address_text> 1205 Qalla Fatuha </Address_text>
   <Address_text> P.O.Box 456 </Address_text>
   <Address_text> Kabul </Address_text>
   <Address_text> 22004 </Address_text>
   <Address_text> Afganistan </Address_text>
   <Telephone_text> Telephone: +93 20 2200 108 </Telephone_text>
   <Fax_text> Fax: +93 20 2200 110 </Fax_text>
   <Email_text> E-mail: [email protected] </Email_text>
   <Website_text> Website: www.flykamair.com </Website_text>
   <Personel_text> Abdul Raquib, chief Executive <Personel_text>
   <Personelmail_text> ([email protected]) </Personelmail_text>
   <Job_code> A1 </Job_code>
</Company_ID>
     <Country> Albania </Country>
etc.
</Story>
</Root>
the problem is we don't want <Company_Code> and <Job_code> elements displayed in the InDesign file.
so we created an xslt file that shoud get rid of these two unwanted elements (obviously the xml file above was pointed to this xslt file)
<?xml version="1.0" ?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<Root>
<Story>
<Country>
<xsl:for-each select="Company_ID">
   <Company_ID>
      <xsl:value-of select="Company_Name"/>
      <xsl:value-of select="Address"/>
      <xsl:value-of select="Telephone_text"/>
      <xsl:values-of select="Fax_tex"/>
      <xsl:value-of select=Email_text"/>
      <xsl:value-of select="Website_text"/>
      <xsl:value-of select="Personel_text"/>
      <xsl:value-of select="Pesronelmail_text"/>
   </Company_ID>
</xsl:for-each>
</Story>
</Root>
</xsl:template>
</xsl:stylesheet>
but it doesn't work. could someone tell me what's wrong with the xslt file? or what would the correct xslt file look like?
Thanks everyone!

Here's the sort of thing I mean in more detail.
First, the XML file:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<?xml-stylesheet type="text/xsl" href="transform2.xsl"?>
<Root>
<Country>
<Country_name>Afganistan</Country_name>
<Company_ID>
   <Company_Name> Kam Air </Company_Name>
   <Company_Code> 1 </Company_Code>
   <Address_text> 1205 Qalla Fatuha </Address_text>
   <Address_text> P.O.Box 456 </Address_text>
   <Address_text> Kabul </Address_text>
   <Address_text> 22004 </Address_text>
   <Address_text> Afganistan </Address_text>
   <Telephone_text> Telephone: +93 20 2200 108 </Telephone_text>
   <Fax_text> Fax: +93 20 2200 110 </Fax_text>
   <Email_text> E-mail: [email protected] </Email_text>
   <Website_text> Website: www.flykamair.com </Website_text>
   <Personel_text> Abdul Raquib, chief Executive </Personel_text>
   <Personelmail_text> ([email protected]) </Personelmail_text>
   <Job_code> A1 </Job_code>
</Company_ID>
<Company_ID>
   <Company_Name> Another Company </Company_Name>
   <Company_Code> 2 </Company_Code>
   <Address_text> Elswhere</Address_text>
   <Address_text> P.O.Box 123</Address_text>
   <Address_text>Another City</Address_text>
   <Address_text> 22005 </Address_text>
   <Address_text> Afganistan </Address_text>
   <Telephone_text> Telephone: +12345678 </Telephone_text>
   <Fax_text> Fax: +12345678 </Fax_text>
   <Email_text> E-mail: [email protected] </Email_text>
   <Website_text> Website: www.dfhdfh.com </Website_text>
   <Personel_text> dfhdfhdfhdfhdfh</Personel_text>
   <Personelmail_text>dfhdfhdfhdfh</Personelmail_text>
   <Job_code> A2 </Job_code>
</Company_ID>
</Country>
     <Country>
<Country_name>Albania</Country_name>
<Company_ID>
   <Company_Name> Number 3 </Company_Name>
   <Company_Code>3</Company_Code>
   <Address_text>Somewhere in Albania</Address_text>
   <Address_text>Freedonia Avenue</Address_text>
   <Address_text>Whatever the captial of Albania is called</Address_text>
   <Address_text> 88888</Address_text>
   <Address_text> Albania </Address_text>
   <Telephone_text> Telephone: + 666 666 666 666 </Telephone_text>
   <Fax_text> Fax: + 777 777 777 777</Fax_text>
   <Email_text> E-mail: [email protected] </Email_text>
   <Website_text> Website: www.albaniar.com </Website_text>
   <Personel_text>Ludwig Wittgenstein, chief Executive </Personel_text>
   <Personelmail_text> ([email protected]) </Personelmail_text>
   <Job_code> A1 </Job_code>
</Company_ID>
</Country>
</Root>
Note that I have renamed the XSL file "transform2.xsl". I have got rid of the "Story" tag, and I have nested the tags more appropriately, with a new tag "Country_name". Here's the XSL:
<?xml version="1.0" ?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<Root>
<xsl:for-each select="/Root/Country">
<Country>
<Country_name><xsl:value-of select="Country_name"/></Country_name>
<xsl:for-each select="Company_ID">
<Company_Name><xsl:value-of select="Company_Name"/></Company_Name>
<Address_text><xsl:value-of select="Address_text"/></Address_text>
<Telephone_text><xsl:value-of select="Telephone_text"/></Telephone_text>
<Fax_text><xsl:value-of select="Fax_text"/></Fax_text>
<Email_text><xsl:value-of select="Email_text"/></Email_text>
<Website_text><xsl:value-of select="Website_text"/></Website_text>
<Personel_text><xsl:value-of select="Personel_text"/></Personel_text>
<Personelmail_text><xsl:value-of select="Personelmail_text"/></Personelmail_text>
</xsl:for-each>
</Country>
</xsl:for-each>
</Root>
</xsl:template>
</xsl:stylesheet>
(That file should be saved as "transform2.xsl" to match the link on line 2 of the XML.)
Hope that works -- Jeremy

Page tool prevents use of Print Booklet feature in InDesign CC2014

Having used the page tool at one time, but with all pages set to the correct size, the print booklet error message is that the booklet doesn't fit the current paper size.
There have been previous discussions, but I can't find one active. The discussion shows as answered, but not resolved. early 2012 this issue was reported as a bug and it is InDesign CC2014, 10.1.0.71 Build. This is the Cloud and this issue has not been resolved.
I went so far as to create a new document and take all the objects from one document and copy to the new document and the issue still exists. I created the document originally in InDesign CS6.I copy pasted contents into a clean document in CC2014. This is a valuable document that needs to be edited and used in the future.
Can someone please respond as to: if this bug that has been reported numerous times in the past, will it ever be fixed? Are we eliminating print booklet at some point so it isn't worth the investment? I don't get it. If there is another discussion open for this, I can't find it. Thanks.

That is not a correct answer. My question was not addressed, however, I very much appreciate the workaround. Go figure…. I think there is a feature in InDesign that if not working, should be removed by the software developers. [back to my question.]
I need to print proofs for a variety of people where I work. I don't want to explain my software is broken and they will need to proof single pages.
I did not know about the print booklet feature in Acrobat. That should suffice nicely.
I still didn't get my question answered, however, so please don't close this discussion.

Word Count feature slow in CS4

The word cound feature in InDesign CS4 is sometimes very slow compared to what it was in CS2. I'm not even counting vast quantities of text, often a story of 1000 or so words will pause for an infernally long time before displaying results.
Has anyone figured out a fix or workaround for this? I typically need to count stories or selections in a hurry.
kurt hoffman
art director
Forward newspaper

If you roll-over the right side of that character count display, a menu will appear, on which also appears the word count. Click on the word count entry, and it becomes the default display at the bottom of the page. Also, by holding down the command key, you can click and drag that floating box to your preferred display location.

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

New problem printing from InDesign CS4 in Lion

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

InDesign CS4 - Index no longer lists entries

First off, it's been a while since I've posted here! I feel all giddy =)
Second, thanks for taking time to look at this one....
I'm on XP using InDesign CS4. We've created and updated many book files over the years starting with CS1 and have not run into this situation before. I'm hoping someone out there can help shed some light as to why, if not a fix. This particular project is a chapter based book file that was originally made several years earlier using InDesign CS1. There are 11 chapters, plus Table of Contents, Index, and technical matter up front. Since the original production, information has changed so we have set out to make an update.
Updates included:
- Figure edits/addition (all externally linked to .AI files)
- Layout changes (i.e., page shifts due to additional graphics, some text content added, some removed, but nothing heavy)
- Conversion from CS1 to CS4
- Chapter Title updates (we are not using any scripts that name internal content based on file name)
- Chapter sequence has changed so that old Chapter 5 is now new Chapter 1 and all following chapters shifted up by one. This literally changed all file names of the individual InD chapter files used to comprise the book document.
OK!
Old Chapter 5 is now new Chapter 1 and required reinsertion into the book document. This was the same for most of the other chapters as well. Upon all updates, the page numbering, sequences, etc., all checked out. I updated the ToC withgout issue. I then attempted to update the Index. This is when I noticed that the "Update Index" option was greyed out (Windows/Type & Tables/Index Shift+F8). Odd, but Ok, so I tried to generate a new index. No luck there either as it only created a empty text field with the title "Index" but with no entries. I then checked the Index Preview list and noticed that all but perhaps 5% of my entries were missing.
So this is where I am. Yes, content was edited, but not to the extent that would have deleted so many indexed entries throughout the book. Has anyone had experience with index errors during conversion from CS1 to a newer version? Or perhaps by renaming and reinserting chapter files into the master book document? I always assumed that the Index entries were held within the chapter file they were created in, until running the book-based Index generation. Perhaps I'm wrong. Could renaming/reimporting chapters have wiped my entries?
I do have the old Index.ind file with all old entries as well as several prints for reference should I need to comb the ENTIRE book replacing each Index entry. I hope that is not my only option! I hope hoping that one of you might offer some sound advice that I'm overlooking here before I head down that road. Please help me, Obi-won. You're my only hope. Any takers?
Thanks in advance for any suggestions. It's much appreciated!
- Noel.

yn wrote:
First off, it's been a while since I've posted here! I feel all giddy =)
Second, thanks for taking time to look at this one....
I'm on XP using InDesign CS4. We've created and updated many book files over the years starting with CS1 and have not run into this situation before. I'm hoping someone out there can help shed some light as to why, if not a fix. This particular project is a chapter based book file that was originally made several years earlier using InDesign CS1. There are 11 chapters, plus Table of Contents, Index, and technical matter up front. Since the original production, information has changed so we have set out to make an update.
Updates included:
- Figure edits/addition (all externally linked to .AI files)
- Layout changes (i.e., page shifts due to additional graphics, some text content added, some removed, but nothing heavy)
- Conversion from CS1 to CS4
- Chapter Title updates (we are not using any scripts that name internal content based on file name)
- Chapter sequence has changed so that old Chapter 5 is now new Chapter 1 and all following chapters shifted up by one. This literally changed all file names of the individual InD chapter files used to comprise the book document.
OK!
Old Chapter 5 is now new Chapter 1 and required reinsertion into the book document. This was the same for most of the other chapters as well. Upon all updates, the page numbering, sequences, etc., all checked out. I updated the ToC withgout issue. I then attempted to update the Index. This is when I noticed that the "Update Index" option was greyed out (Windows/Type & Tables/Index Shift+F8). Odd, but Ok, so I tried to generate a new index. No luck there either as it only created a empty text field with the title "Index" but with no entries. I then checked the Index Preview list and noticed that all but perhaps 5% of my entries were missing.
So this is where I am. Yes, content was edited, but not to the extent that would have deleted so many indexed entries throughout the book. Has anyone had experience with index errors during conversion from CS1 to a newer version? Or perhaps by renaming and reinserting chapter files into the master book document? I always assumed that the Index entries were held within the chapter file they were created in, until running the book-based Index generation. Perhaps I'm wrong. Could renaming/reimporting chapters have wiped my entries?
I do have the old Index.ind file with all old entries as well as several prints for reference should I need to comb the ENTIRE book replacing each Index entry. I hope that is not my only option! I hope hoping that one of you might offer some sound advice that I'm overlooking here before I head down that road. Please help me, Obi-won. You're my only hope. Any takers?
Thanks in advance for any suggestions. It's much appreciated!
- Noel.
Please forgive my weird sense of humor, but, it looks like you've found a perfect way to delete 95% of your index markers in a book.
Seriously, I'm not certain how this could happen, but I do have a couple of ideas on how to troubleshoot that I learned from some years as a trainer and tech-support guy.
* Go back to the beginning of your process. Open a copy of an old file in CS1, if you still have it, and if it runs on a workstation that's compatible with it. Generate an index; the original index markers should work. If you don't have CS1, open a copy in whatever release you used to convert your old files, and generate an index. Compare the two indexes, if you have been able to make one for the file with CS1. If no CS1, compare the index entries in the newer version's index with the complete CS1 index. If any original-index entries from the test file aren't present in the newer-version index, here's where things went bad. If nothing's lost, this likely isn't the trouble spot.
What could go bad here? The obvious suspect is the conversion from CS1 to CS4. I can't remember how CS1 worked. If it had an export-to-inx, and you opened that inx file in CS4, and the CS4 file is missing index markers, try opening a copy of the CS1 file directly in CS4. Or, if you opened the CS1 file directly in CS4 and lost index markers, try exporting from CS1 to inx and opening that file. If both methods lose index markers, then this is the problem spot; perhaps someone has a suggestion to fix this problem.
* If the file conversion doesn't lose index markers, then the book feature is the next place to look. Create a new book in CS4 and add the files in the old order and generate an index. Compare it to the original. No loss, then push it harder, and rearrange the order of documents in the book, and regenerate the index. If this fails, generate a brand-new index. If both index generation approaches fail, then you've found the problem. Perhaps someone can suggest a fix.
* If all's OK so far, try more stuff, like rearranging chapter files, generating the index.
* If rearranging files works, test each succeeding step in the process until you find the failure.
* If you can't find a fix for the problem you uncover as the cause, one possible help in re-marking content for a new CS4 index would be to export the original book file set from CS1 to PDF with index entries set to create hyperlinks. Then work through that PDF index by clicking the page references to find their sources, and create new markers in the new files.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Indesign CS4 button flashes after exported to PDF and viewed in Acrobat Reader/Professional X

Hey everyone,
Greetings!
I've encountered this odd problem when preparing my portfolio.
I've created some 40 buttons in InDesign CS4 (all according to the official tutorial) to Show/Hide Fields (specificly images), and navigate through the pages.
The buttons all have their own Normal and Rollover states, but no Click states.
After exporting the file to PDF, I tested the buttons in Acrobat Reader 9 and Acrobat Pro 9, and both the actions and the states worked fine.
BUT that's not the case with Acrobat Reader X or Acrobat Pro X.
The actions are still there, showing the images and navigating, but the states are not!
The buttons' rollover states just flashes when the mouse hover above them, and even in Normal state, they kept *blinking* randomly.
Frustrated for a week.
PS. I suspected and used a Indesign file with only one simple button to rule out the following:
1. Overlapping buttons
2. Slow processing due to large image size
3. Mishandling of transparency
At this moment I'm pretty sure it's an Acrobat thing...Help!

Thanks Dave! I was in the middle of writing this when your post came in:
Not sure if this will help anyone, but I changed the button fill color to white and it seemed to fix the flicker. I exported each state from indesign as a PDF and recreated the button from scratch. This still had the flicker. I'm guessing something strange is happening with the transparancy of the states.
Glad to hear it's fixed!

Can I make an InDesign CS4 .swf export scale depending on the open size of a browser?

Hi there. I would like to make my inDesign CS4 .swf file able to scale in accordance with the open size of a browser. When I have used Flash previously changing the size of the document to 100% achieved this effect. However, I'm not having much luck with this approach with my inDesign CS4 .swf export. I'm loathe to export it as an XML file for Flash as I want to keep my fancy page turns. Any help would be very much appreciated. I'm not very fluent in Flash-speak so I'd also appreciate it if anyone offering a solution could t-a-l-k r-e-a-l s-l-o-w.
Regards,
Jackie

This is quite old thread, I don´t have those source codes anymore... besides many people still uses monitors with width of 1024, 1219px wide magazine would clip in those monitors, so I don´t suggest to use it without shrinking....
Anyway, if you want to improve positioning of your SWF, you have at least two way to do it
1) Go to free http://www.bobbyvandersluis.com/swfobject/generator/index.html and create a new html-wrapper for your project
2) If that´s not enough or you want some extra features like zoom, print or search, go to http://www.edocker.com and download a free trial of eDocker.
ps. eDocker is in Adobe MAX Awards final, if you want to help it to win.... go to
http://2010.max.adobe.com/awards/finalists/
and vote for eDocker....

InDesign CS4 memory problems

I have had memory problems with InDesign CS4 (and also with Photoshop CS4) for about a year now. If my file has a lot of pictures (100+) at some stage I get error message "Out of memory" . In the beginning it just have problems with redraw pictures (half of picture stays black), but also export to pdf is halted by same message and printing to file also. No problems in the beginning of large files or with files with text only. At one point InD just has enough and starts to behave like a ... Only solution is to export InD CS4 file as INX and continue to work in CS3 (but it takes a long time to match the text flow because textengine works differently). It's not monitor, because I have changed monitor during this year (from LaCie 22 blue IV to EIZO 27"). It seems that it's not video (NVIDIA GeForce 9800 GTX, 512 MB) also, because everything functions normally with CS3. I know, that it's not a proper video card for my work, but one likes to play Bioshock sometimes... Something strange happens with Photoshop CS4 also when I work for a long time without shutting down the program. After about editing 60+ pictures Photoshop CS4 begins to slow down (specially with using clone tool).up to impossible to work. You just have to wait while the cursor is dragging itself to right place an picture is redrawing itself. Seems like memory cannot empty itself and gets overloaded when working with CS4. No problems with Photoshop CS3. One cannot notice anything with small files. I can work with CS3 but there are features I would like to use in CS4.
Have anyone experienced anything similar?
Claudius
Win XP SP3
4GB RAM
video NVIDIA GeForce 9800 GTX 512MB with latest drivers
CS4 and CS3

Having exactly the same here. 16 Gb of ram in an 8 core 64 bits Vista system. Absolutely no infections on my system. Having great troubles getting my work ouputted.
I'm making an overview with 50 cards with pictures in them and bevels on the edges, dropshadows. It might be heavy but it is a normal question from my client.
I don't care if transparency is difficult for Adobe to handle. They shouldn't make it public if it is not properly tested. I am now so far as to make the composition in photoshop ( if that works)
What I thought was the problem is that I originaly placed indesign files in frames. But there is a great script out there on www.automatication.com to convert that in editable object again. Works great so check that out. But this didn't solve my problem. The effects used in these items are the memory consummers and Adobe is not freeing the memory properly.
Advise to Adobe: check also to dropshadows feature because this is not scaling up or down with the rest of the effect.
I'm am writing a realtime 3D renderengine here, if CS5 is not working fine, I might digg in to this one as well, getting a bit tired of waiting for properly working software.
Jaap Clarenburg
[email protected]

InDesign CS4 application moving to front

Is it possible to stop InDesign CS4 application from moving to the front after saving or opening finishes. After I close a file while saving changes, I move to another application to begin work, such as typing, then InDesign snaps forward interupting my work. Not sure if there is a preference that eludes me or if there needs to be a script added/changed.
Any thoughts?
Thanks in advance for any help.
J

Thanks Stix! I guess I never noticed that it happens with other programs as well. I'm running on Max OS 10.5 and i'm now in search of a utility that would give me the ability to turn that feature off, or at least ignore requests from running programs.
Thanks again!

Newb Question regarding Same InDesign CS4 file used on two different computers.

Probably been answered 1,000 times or is common knowledge, but I could not get it narrowed down using the search feature.
I would like to take an InDesign CS4 file ( a book) created on my imac, and work on it while away on a macbook pro with identical InDesign CS4 software. I will only be changing layout and some text, but will not be modifying anything that is a link other than re-sizing.
After doing this, will I be able to put the updated file into my imac and be ready to go, or am I playing with fire? If I might do more harm than good, I will not do it. It's just that I have a big project due and I have to be out of town for 3 days and would like to work on it if I can while I'm gone.
Thanks for any input,
Sebastian Gaeta

If you only copy the InDesign file then yes, preflight will alert you to the missing links. Just ignore it, or package the file and transfer the links, too.
Better yet, get yourself a membership to Dropbox. With Dropbox installed on both computers you can keep the entire job (up to 2 GB) in one folder and the files will sync to Dropbox’s servers, which will then sync to all computers sharing that folder. Open InDesign file on Mac 1, make changes, close file. Open file on Mac 2, make changes, close file. Open file on Mac 1 and the changes will be there. Best of all, you can go to Dropbox’s website and access a file’s history. This means you can go back to previous version of the file if you need to.
I add a folder to my Dropbox folder for any current job. When I’m done I move the files out and archive them.
Self serving link: https://www.dropbox.com/referrals/NTUwMDUyOTI5
If you sign up using the above link I get a tiny increase in my allotted storage.

New printing problem with InDesign CS4

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

Wanted to let folks reading this know that I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver
for OS X 10.7.2.
Aisolve over on the Adobe board was also helpful in advising me that if I was able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.
Thanks, Apple and Aisolve!

Is there a "hide" feature in Indesign CS4?

Similar Messages

Maybe you are looking for