Is there a I/O Device like the X-Fi I/O for my Audigy 2

Hey,
I am a dj and I use my computer to dj most of the time. Right now I have the audio out running out of the main headphone /8" jack in the back and then converted to RCA and plugged into the inputs of my mixer. This is lame. I would like some professional outputs and inputs like the one provided in the X-Fi I/O device for my Audigy 2 ZS. It appears that the X-Fi I/O device is not compatible with my Audigy 2 ZS card, which is, put kindly, frustrating.
Is there any device, options, anything from any company that could plug into my audigy card (besides into the /8" jacks in the back) that would provide good input and output options?Message Edited by rex030 on 08-3-2006 2:36 PM

No, I'm using an Audigy 2 ZS dri've bay with my X-Fi. The dri've's physically compatible with the X-Fi. The Audigy 2 ZS is compatible with the X-Fi dri've. The only difference is the firewire port, but this uses a separate cable to the dri've bay and the X-Fi dri've bay doesn't have one.
So you will be able to use an X-Fi dri've bay with your Audigy 2 ZS, but you won't get a firewire port on the front panel. ( The Audigy 2 ZS has two ports on it for the dri've bay using two different cables, one modified IDE cable for most of the front panel connectivity and a separate Firewire port for the remaining front panel fireware connectivity. The X-Fi dri've bay doesn't accept the second Firewire cable as it doesn't have a Firewire port, but that shouldn't affect it. I initially ran my Audigy 2 ZS dri've bay on the Audigy 2 ZS without the firewire cable ).

Similar Messages

  • Is there an app that works like the Mac OS X "finder" for iPhone?

    Is there an app that works like the Mac OS X "finder" but to see files on the iPhone???

    Apps on the iPhone are sandboxed. That means they only have access to their own files. They cannot see the files of other apps or of the system. This is for security reasons.
    There are some apps that present a list of files, like Air Sharing, for you to manage, but there is nothing like the Finder.

  • Ipad air 2 there's no silent mode like the other iPads ?? the button that does it does not exist on the iPad air 2 what does replace it??

    ipad air 2 there's no silent mode like the other iPads ?? the button that does it does not exist on the iPad air 2 what does replace it??

    hi the older button could be set to either "force portrait mode" or "silent mode". now you can do both in the iOS control center (swipe from the bottom of the screen), so the need for a button isn't needed anymore.

  • Is there a program that works like the old iPhoto?

    Is there a program that works like the old iPhoto?
    The old iPhoto is my ideal program. Unfortunately, it does not work on my new operating system. I like having the ability to look over my images with a slide show. However, the new package folder does not give me complete access to my pictures. Is there a program that will have both slide show with music options, and the general folder for the files? I heard that Picasa was supposed to have a general folder, but it is using the iPhoto package.
    I have looked over the solutions to getting access to images from the iPhoto package mentioned in the discussion forum. I would like a simpler system that works like the old iPhoto. Is this a possibility? I do not feel comfortable putting my original photo files into a system that does not let me look at the file information, and I would like to have the original benefits of iPhoto tools.
    Thank you for your time.

    Welcome to the Apple Discussions.
    The current iPhoto is laid out specifically the way it is because of folks like you
    Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Even in the old iPhoto it was never correct to access the iPhoto Library Folder.
    However, the new package folder does not give me complete access to my pictures.
    This is untrue. Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    There they all are.
    Standard Warning which applies to every version of iPhoto: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    I do not feel comfortable putting my original photo files into a system that does not let me look at the file information
    What information are you missing? If you can tell us we may be able to help you more.
    Regards
    TD

  • HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

    How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

    The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address.  If they ar all on the same email, it is up to the user to decide which to use.

  • Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)?

    Hi,
    Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)? Can you please help me?
    Venkatesh

    hi,
    there are standard ISR Adobe forms (interactive) to my knowledge, which you can customise at your convenience.
    kindly check at <a href="http://service.sap.com/adobe"></a>.
    more precisely, go here
    <a href="https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000478323&">Interactive Forms Delivered by SAP Solutions</a>
    Do update the forum reg your findings.
    Thanks and Regardas,
    Anto

  • Will apple be releasing a bumper type case for the iPhone 5, like the one that was available for the iPhone 4?

    Will apple be releasing a bumper type case for the iPhone 5, like the one that was available for the iPhone 4?

    Sorry, but we are not Apple so we don't know what Apple will do.

  • Why do I have to manually slide my screen to see everything in the window? It's like the window became to large for screen

    It's seems like the window became to large for I pad screen. I have to slide screen with finger, both sideways and up &amp; down. Can someone advise me?
    Thanks
    J. Norfolk

    Go to
    Settings>General>Accessibility and look for zoom
    also, three finger double-tap should undo the setting.

  • Serious problems using for the Airports and any devices like the new iPod or iPad 3 after installing Airport

    I know this sounds crazy but I recently installed an Airport express and an Airport Extreme, I worked on it for several days and everything seemed to finally working like it should using manual configurations so it is all right as far as function goes. Later on I found out I had to do a restore on my new IPod and the latest iPad. No other changes were made to the system using snow lepoard 10.6. I tried for several days to restore these devices with no explanation of the problem. I could not use wi-fi or cellular to update any of the devices. Don't ask me why but I shut the computer down and removed every usb device except for the wireless key board that came with the latest iMac system. I made sure everything was the latest version of my applications. It did not affect my DSL or connection to the internet. I even removed the thunderbolt cable so I had 1 usb connection to the computer. The system was setup just like it came out of the box. I brought up iTunes and connected the USB cable to the iPad and selected restore. I had used iCloud to back everything up when I first bought the iPad and iPod. I also made sure iOS 6 was installed. I clicked restore and it loaded without any problem in just a few seconds without having to sync anything. I checked when it was done and it worked exactly like it did when I first bought them from Apple. The only strange thing that happened was I purchased a brand new generation iPod from Apple (which was made in China). I had not installed any apps for several weeks and had no problem with them. This seems crazy to me that you would have to reset he computer to it's original setup in order to restore the latest iPad and iPod software and devices. The only item that I did not have any problem with was the iPhone. Has anyone had this problem? If so how did you deal with it. Was it the airports, made in China the new iOS or the new iTunes that is causing this? gillie70

    Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
    Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
    The ipad is designed to sync with only one device.

  • How can the incoming mail section on an iphone5 disappear? I can send messages but cannot receive them. Shouldn't there be an incoming section like the outgoing mail server section?

    I Haven't received incoming email for nearly a week now.  I have checked the settings and the only thing that isn't there is the INCOMING MAIL SERVER section.  The outgoing mail server is there and is correct.  How can I get it back so that I can enter the mail server?

    Hi Olivier,
    Thanks very much for that. it worked on my powerbook(running Tiger). I went to the link and followed the instructions and it worked. Did i mention that my dad who has a iMac running Leopard now has the same problem. I thought i would just do the same but the Preference in Mail for Leopard is of course different. There is no icon called "Server Settings" under Accounts section like there is on mine. Do you have a link for the same kind of instructions for Leopard?
    Thanks again,
    Bryce

  • There is no bluetooth device in the device manager on my pavilion dv7 - 4065ei, does it exist?

    I have a HP Pavilion dv7-4065ei on x64 Windows and I have never used the bluetooth device that is supposed to part of this laptop. I just know the specs from HP website say there is a BT device but I dont see it. I bought my laptop second hand so I dont know the original state.
    I downloaded BT drivers on the official HP website (broadcom 2070) but I recieve an error during installation that sort of says there isn't any BT device on my laptop. There is no indication of any bluetooth device on this laptop even in the Device Manager.
    I know there something I'm missing.
    Any help please?

    Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion, which is the full featured version of AirPort Utility for Lion. This version was released at the same time as AirPort Utillity 6.0.....perhaps you missed this.
    If you still don't see a NAT tab...that would indicate that the AIrPort Extreme is in Bridge Mode (NAT is turned off...so there is nothing to adjust) and that NAT is being handled by another device on your network.

  • The Case of Missing ID3 Tags... and non-Apple devices, like the Sonos

    Ever since the debut of iTunes 6, devices other than my Mac and my iPod have been unable to find the ID3 tags associated with .mp3 files. If I rip a CD in iTunes 6 or 7, artist/album/track data (and album artwork) display properly in iTunes and on my iPod; but when I update my Sonos music library, for example, all it is able to see is the file name. So, for example, if I rip Jimi Hendrix's "Are You Experienced," the track "Purple Haze" shows up in iTunes correctly associated with "Hendrix" and "...Experienced." On the Sonos system, however, all it sees is the track "Purple Haze.mp3." No artist. No album. Ditto for placing one of these .mp3 files on a non-Apple mp3 player: track name only shows up. Bizarrely, if I rip CDs on an older PPC G4 running iTunes 4.0, and then import those files into either iTunes 6 or 7, the ID3 tags remain married to the files. Anyone have a solution to this vexing problem?
    PowerBook G4   Mac OS X (10.4.8)   2 Gigs SDRAM
    Core Duo iMac   Mac OS X (10.4.8)   2 Gigs SDRAM

    In the newer versions of itunes 6+7 (don't know about 5) iTunes by default will rename the file on the HD to match the info in the "Name" column of iTunes - this is true if you have the "Keep" option selected in iTunes prefs>Advanced>General.
    With iTunes 4 this was not true. I would use one of Dougs scripts to rename all my files on the HD to be Artist-Song Name. You can still do this in iTunes 6+7 if you turn off the "Keep" option or you don't edit any info in the id3 tag once you have run the script.
    I know nothing of the Sonos and other stuff - I can only think that is reading only the file sname and not the id3 tag info. If it doesn't have the capability of reading and displaying the id3 tag info then I think you are out of luck. iTunes is reading the id3 tag info.
    MJ

  • Is there a way to dynamically determine the number of out parameters for a server side procedure?

    Hi,
    Below is a helper method used for calling a server-side function which loops through the inbound bindVars parameter to populate the function's IN parameters. Is there a way to dynamically determine the IN/OUT parameters based on the procedure name in the stmt parameter? No members of the CallableStatement class seemed promising, but the getParameterMetaData() method in the PreparedStatement class seemed like it could be helpful lead. However, I have not found any detailed descriptions (yet) of how to use it.
    protected Object callStoredFunction(int sqlReturnType, String stmt,
      Object[] bindVars) {
      CallableStatement st = null;
      try {
      // 1. Create a JDBC CallabledStatement 
      st = getDBTransaction().createCallableStatement(
      "begin ? := "+stmt+";end;",0);
      // 2. Register the first bind variable for the return value
      st.registerOutParameter(1, sqlReturnType);
      if (bindVars != null) {
      // 3. Loop over values for the bind variables passed in, if any
      for (int z = 0; z < bindVars.length; z++) {
      // 4. Set the value of user-supplied bind vars in the stmt
      st.setObject(z + 2, bindVars[z]);
      // 5. Set the value of user-supplied bind vars in the stmt
      st.executeUpdate();
      // 6. Return the value of the first bind variable
      return st.getObject(1);
      catch (SQLException e) {
      throw new JboException(e);
      finally {
      if (st != null) {
      try {
      // 7. Close the statement
      st.close();
      catch (SQLException e) {}
    James

    The PreparedStatement.getParameterMetaData() object is exactly what you need for this task.
    Once you have the ParameterMetaData you can ask it how many parameters are present and which mode they are. The parameters are numbered from 1 to n and you can use ParameterMetaData.getParameterMode(1); to get the mode of the 1st parameter. The modes are defined as static values in the ParameterMetaData object. Check out the doc at http://docs.oracle.com/javase/7/docs/api/java/sql/ParameterMetaData.html
    Timo

  • Can I make a calendar that works like the "Birthday Calendar" that updates for something like an anniversary?

    I would like to have a calendar called Anniversaries that updates like Birthdays. Is there a way to do this? I like the way it shows the age of the person and would like it to show the number of anniversaries. This would be most helpful for many types of anniversaries. I have it now as a birthday but it is somewhat cumbersome and would seem to work better as a separate calendar.

    Here's what I've done which may work for others.  I've scrapped the idea of using the birthday reminders function.  Instead, I created a new calendar (click the settings icon in the upper right of the icloud website) called "Birthdays-Non Contact".  Then I entered the missing bdays as all day events (repeating every year) on this calendar.  So now all my birthdays show on my main calendar....some come from the birthday field in the contacts database and the rest come from my newly created "Birthdays-Non Contact" calendar events. 
    Interestingly, if I choose to show only my "Birthdays-Non Contact" calendar, all my contact birthdays appear on it as well, so it gives a complete list of all my birthdays and nothing else....cool.
    I should say, everything I'm talking about is what I see on the ICloud site.  My husband has the phone at the moment which I presume will show the same picture.

  • We used the same id for her phone an sisters iPod now everything goes to her phone is there anyway to change it on the iPhone and keep it for the iPod

    We set up the iPhone with the same Apple ID an password is there anyway to change if on the iPhone am still keep it for the ipod

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

Maybe you are looking for