Is there a Interconnect migration guide ?

We are migrating from 9iAS to 10g.
Is there a migration guide to Oracle Interconnect ?
Regards

Isaac,
If you have a Metalink account, then please refer to Metalink Note 306454.1 . URL to the note is below.
http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=306454.1
HTH, Yan

Similar Messages

Where to find the StarOffice Migration Guide?

According to the help file there exists an StarOffice Migration Guide with more specific information ragarding to conversion of/to MS Office documents.
Couldn't find this document.
Hint's are highly welcome!

Well this one isn't done directly by Sun but is done by a responsible group.
http://documentation.openoffice.org/manuals/oooauthors/Migra tionGuide.pdf

Oracle 8i Migration Guide

Hi all,
I am desperately looking for the above mentioned migration guide. Could someone provide a link or the document itself? That would be really great.
Thanks,
Daniel

Hi,
We are expecting a project on SQL server to Oracle database migration.
The link suggested doesn't seems to work.
Is there any document which would provide the basic guidline and terminology used in migration.
Please note that one of the links I have is to the Oracle Migration Workbench at OTN
Needed some other document to refer.
Regds,
Arunima

Latest Migration Guide

Hi,
we developed almost 1000 forms and 800 reports with Designer 1.3.2 and Headstart 3.4.2. Forms were all 100% generated and reports circa 70%.
Now we migrate to developer 6i and we run in all kinds of troubles and problems. We choose simple upgrade path from Headstart Migration Guide ver. 2.1.2.0.2, but this guide is limited. Is there available any newer or updated migration guide, that we can get it? And any suggestion will be appreciated.
Regards,
Miran

Hi Jack,
I agree with Cliff. You should complete the
Post-deployment Configuration properly in Server Manager firstly. Then you will be able to open the Windows Server Essentials Dashboard.
In addition, for migrating SBS 2003 to Windows Server 2012 R2 Essentials, please refer to following TechNet article
and check if can help you.
Migrate from Previous Versions to Windows
Server 2012 R2 Essentials or Windows Server Essentials Experience
If anything I misunderstand or any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Headstart Designer 10g Migration Guide?

Is there a Headstart Designer 10g Migration Guide?
We are migrating our forms application generated from Designer2K 2.1, Forms 5, Headstart 212 with repository in database Oracle 8 to the latest releases Designer 10g (10.1.2.0.2), Forms 10g (10.1.2.0.2) with repository in Database 10g R2 (10.2.0.2).
If we follow the migration path for designer and the repository database to 6i then to 10g, recompile the object library and form templates, regenrerate our modules, then will it still work? Do we need to do anything to the Headstart Designer Template Package? Hope you can help with a road map.

Hi Nathan,
there are several possibilities for a migration path. It depends on the expected life-span of the application(s), wether or not you want to use new Headstart functionality, etc.
A description of these possibilities can be found in the migration guide which is included in the Headstart 9i/10g documentation. Do you have the latest version of Headstart available?
Because you currently use an older version of Headstart, a migration will take a bit more work than described in this documentation because Headstart code has changed. So you will have to replace Headstart function calls or create a wrapper library.
Further, regeneration of (the more complex) Forms is not that simple as you will probably have to modify the lay-out. If you use client-side functionality (open MS Word/Excel, write to the local file system, etc), you will have to use Oracle's Webutil-package.
So it can be done. But it will take some planning and programming. Succes.
p.s. if you (temporarily) publish your e-mail address, i can provide you with some additional info.

Adobe ships FreeHand-to-Illustrator migration guide

Adobe ships FreeHand-to-Illustrator migration guide:
<
http://www.macworld.co.uk/news/index.cfm?RSS&NewsID=14504>
Cheers Martin

They have to stop production of the illustratror and add the
most cool
feature of the illustrator in freehand or, they have to
change all the meanu
and shortcuts of freehand & illustrator as same, so that
poeople can easily
swich between them. Because it is very difficult for the
designers to switch
their ideas in new software environment. If they puzzle
around the tols,
then they can't deliver good creativity.
Anand
www.apbdesign.net.in
"Tinius" <[email protected]> wrote in
message
news:e2tsqf$jc0$[email protected]..
> Count me in!
> Not sure that I have the skills nor the expirience to
contribute at the
> professional level needed here... but I'll try the best
I can!!
>
> Adobe definitly has a hidden agenda somewhere...
>
> btw.. one little ray of sunshine today... talked to my
former employer
today
> and they will stick to FH untill the bitter end. They
will also continue
to
> recommend FH when starting new production facilities
around the world. Not
much
> but now we need every fragment of hope.
>
> Maybe we should start a new thread that brings a clear
message to all
users of
> this forum? A wake-up-act-now! thread?
>
> What about this:
> As well as a fund raiser for the AI to FH migration
guide, as I
suggested
> yesterday - also raise money to advertise on the web?
For the migration
guide,
> for FH, for ... I don't know what... anything that will
help... just to be
> visible out there!
>
>

ADF 11 Migration Guide

Hi,
I'm wondering if there is an ADF 11 migration guide?
Right now I'm using ADF 10g and so far I've only found the ADF 10g to Trinidad migration information, which is useful but names components which aren't in ADF 11.

Is the migration of application developed in 10.1.3.3 is available now to Jdev 11g technical preview.I have also noticed that several components like af:panelForm , af:panelHorizontal are missing in Jdev 11g.
How can we do the migration.

Complete flex 3 to 4 migration guide?

I have a moderately large AIR project developed in flex 3. I tried to migrate to flash builder 4 (import the project folder) and got tons of errors. Besides, it seems fb4 doesn't recognize my project is an AIR project. I wonder if the flex team can provide a complete migration guide to make the migration easier. Thanks.

Simply importing an air project into FB4 beta2 shouldn't cause to many issues it should still bring it in as an mx WindowedApplication, the last air project I imported had over 70,000 lines of code and some 2,500 files and the only problem was an extended graphics component.
Don't move the project folder into your workspace it needs to be imported from its original FB3 workspace, unlike FB3 when you import a project it doesn't move the project into your current workspace it just updates the settings of the project folder so its an idea to back things up before importing.
David

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein

Is there a plain English guide to sharing iCal Calendars via OSX Server Mountain Lion?

Is there a plain English guide to sharing iCal Calendars via OSX Server Mountain Lion? The present documentation is very limited and of no assistance to a beginner like me.

I don't have a domain set up on OSXServer I just have server.myserver.private. I have no mail services at server.myserver.private. I uses [email protected] (a different server) as the email address in the setup process.
When I go to share the calendar it requires a valid email address, rather than [email protected], so I enter my email address as a test, I try many other email addresses too but the server responds with an error stating " (email adress) was not recognized by the server. A new invitation has not been sent.

Opera 12 Migration Guide Needed

The great Opera 12 Migration has begun 8(
We are sad, mad & need all the help we can get...
I & many others view google as spyware.
I'm not a apple fan neither - former mac user
We need a Opera Migration Guide.
A lot of the web tools I need are already in place like Web Developer Toolbar & FF Developer Tools!
Need to figure a simple way to export Contacts & Mail from Opera's M2 Mail to SeaMonkey, Simple Mail or better lightweight e-Mail client.
I could do many cool things in Opera that have not figured out yet in FF.
"Content Blocker" would still work even if JavaScript was OFF - Great for Web Dev ;)
In hotmail I could view the Source Code of Spam Message w/out even opening the junk. I use this technique to see what I needed to block from the headers & body.
I still like IRC - must have for the Leo Laporte - Tech Guy Radio Show!
Still Need: Window Size in Title Bar, Page Zoom Controls, Small Screen (Very Basic Mobile View), Check Box Controls on Toolbar, Author/User Modes, Easy Proxy On/Off - I use a Check Box Control on Toolbar!
& More I've missed...

For IRC you can use the [https://addons.mozilla.org/en-US/firefox/addon/chatzilla/ Chatzilla] addon.

I am wondering about transferring my pc date to my new iMac. I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this?

I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this? I'm going to be trying to move the date to a new imac 27' with fusion drive.

the following set of instructions is a little longer, so you might want to print it out and have it handy
Step 1 - PC
If your PC already is connected to the Internet, hold down the Windows button on
your keyboard and simultanously press R. Into the opening window enter "cmd" (without
the quotation marks). A command line will open, enter "ipconfig" (again without the
quotation marks) at the prompt. Now find the section labelled "Ethernet-Adaptor" and
note the values for IP-Address, Subnet-Mask and Default-Gateway on a sheet of paper
If your PC is not already connected to the internet, you need to manually configure its IP address.
open Network and Sharing Center
do a right click on Ethernet and select Properties
in middle of the screen there is a box labelled "This connection uses the following items"
out of this box select "Internet Protocol Version 4 (TCP/IPv4)"
click on the Properties button in the right corner
Into the window "Use the following IP address" enter the following values
IP-Address: 192.168.0.1
Subnet-Mask: 255.255.255.0
Default-Gateway is the IP-Address of your Router. This value is needed for internet connection, for the file sharing setup only this value can be left empty.
Step 2 - Mac
If your Mac already is connected to the internet, it is likely that it has automatically receive the necessary parameters from your router and therefore should be in the same network as your PC. To be on the safe side, you can check this by
open System Preferences
select Network
choose Ethernet from the panel on the left side of the window
click on Advanced
click on TCP/IP
compare the values for IP-Address, Subnet-Mask and Default-Gateway with those you wrote down earlier.
If both PC and Mac have identical numbers in the first three parts of the IP-Address, you are set.
If your Mac is not already connected to the internet, you need to manually configure its IP-Address as well.
In the TCP/IP window you have just opened select "Manually" from the drop down menu "Configure IPv4:"
Enter the following values
IP-Address: 192.168.0.2
Subnet-Mask: same as with PC
Default-Gateway: same as with PC
Step 3 - Activate File Sharing on PC
open Control Panel
select Network and Internet
select Network and Sharing Center
on the left panel select change advanced sharing settings
in the middle of the new page enable turn on file and printer sharing
Step 4 - Activate File Sharing on Mac
open System Preferences
select Sharing
set check mark next to File Sharing (green circle appears on the right side next to File Sharing:)
click on Options:
set check mark next to Share files and folders using SMB
in the listbox under the text Windows File Sharing make sure there is a check mark next to your account name
Step 5 - Create a share on your PC
In Explorer select the folder you wish to share
do a right click on that folder and select "Share with"
choose "Specific people"
a new window opens. there select your Windows username (usually the first in the list)
if you plan to copy from Windows to Mac only, it would be sufficient to grant Read permission only, but, since most likely you are the only person to access that share and certainly do not plan to sabotage yourself, Read & Write permission is ok too.
finally click on "Share"
Step 6 - Create a share on your Mac
Once the check mark next to your account name is set (see above) your home directory is automatically set as a share.
Step 7 - Connect your PC to your Mac-Share
do a right click on the network icon which resides on your desktop or in the left
panel of every Explorer window
Select Connect Share
in the text box next to Folder: enter \\<ip-address-of-your-mac>\<your-osx-username>
if you are using the same username and password on both Windows and OSX click on "Finish",
if not set the check mark next to "Connect using different credentials" afterwards click on "Finish" A new window will open where you enter username and password that you are using with OSX
Step 8 - Connect your Mac to your PC-Share
hold down the command key and press K simultanously or in Finder click on Go in the menu at the top of your screen and select "Connect to Server"
in the Window that opens enter smb://<your-windows-username>:<your-windows-password>@<ip-address-of-your-PC/<y our-windows-username>
or
smb://<ip-adress-of-your-PC/<your-windows-username> you will be asked to enter your Windows username and password in popup window
Now you have both computers connected to each other. Each will provide you access to your home directory of the other computer. Open a second Explorer or Finder window with your local home directory and start copying

Are there any XI Development Guide ?

Hi Everybody,
I would like to know if there are any development guide to XI. I am using the Sap Infrastructure XI 2.0, but it is a compilation from de help. I need understand the comunication : Data_Base-XI-Sap using IDocs.
Thanks in advance.
Bye,
Renato.

Hi Lu,
Thank you very much ! It is a good documentation.
Now I am trying to send the Idoc to Sap but the error occurs :
<SAP:Code p1="The accessing object does not support the path //s" p2="MS1" p3="" p4="">IDOC_ADAPTER.SENDER_BSI_INCORRECT</SAP:Code>
<SAP:Text language="EN">Unable to convert partner to IDoc sender partner</SAP:Text>
Do you know any ideia ?
Thanks,
Renato.

Migration Guide from EP6 SP13 to Portal Netweaver EP 7.0 EHP1

Hi Gurus
I am working on a portal migration project EP6 SP 13 (WAS 640) to Portal Netweaver EP 7.0 EHP1 .
Here I am lokking for a migration guide or a document based on our project . I check on SMP and sdn but not able to find the suitable guide
All I got is an how to guide "How Tou2026 Migrate from SAP Enterprise Portal 6.0 SP2 to SAP NetWeaver '04"
Please guide me from where I will get relevant document.
regards
Jaswant

Hello,
Please check out http://service.sap.com/instguides --> SAP NetWeaver --> SAP NetWeaver 7.0 --> Upgrade. On the next screen, open the link "Upgrade Documentation - SAP NetWeaver 7.0 incl. EHP1" under "2 - Upgrade - SAP NetWeaver Systems".
On the next screen, follow the link "SAP NetWeaver 7.0 Including EHP1 - Java", and select the guide you need.
Kind regards, Wilbert

Is there a chart or guide...?

Is there a chart or guide that explains what was added to what model during the update to iOS 8? The differences between models such as the 5s and 5c for example.

Not that I have found from Apple, But Ars Technica has a very thorough analysis: http://arstechnica.com/apple/2014/09/ios-8-thoroughly-reviewed/

Is there a Interconnect migration guide ?

Similar Messages

Maybe you are looking for