Is there a IVI driver for Racal Instruments 1256 switching system ?

Is there any IVISwitch driver for the RI1256 switching system somewhere ? Is NI working on it since RacalInstruments doesn't seems to be interrested in this matter ?

Hi,
I am not sure how similar the 1260 series is, but we do have IVI drivers for it at www.ni.com/idnet. You may be able to get away with using this driver for your instrument if it is basically the same thing with fewer features.
If not, I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own driver, we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party ven
dors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument.
Hope this helps out!
Let me know if there is anythign else I can do for you.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Similar Messages

  • Using IVI driver for reading delay in MSO6104A

    Hi,
    I have the NI IVI driver for the MSO6104A scope. The driver is functional and I manage to use it.
    My scope has a function of measuring delay between two different channels. But, how can I read the Delay measurement using IVI scope step?
    Is there any other way of reading this measurement?
    Thanking in advance
    Solved!
    Go to Solution.

    As far as I know, interchannel delay is not a supported IVI measurement function. So, you can complain to ivifoundation.org first of all. Or, in a code module, you can use the instrument specific driver to get the measurement. This would make the application 'non-IVI' so most of the reasons for using IVI in the first place are gone. Or, retrieve the waveforms from each channel and calculate the delay in a code module.

  • Using IVI driver for Keithley 6485

    I am trying to learn how to use IVI drivers.  I installed IVI drivers for two instruments, an HP34401A and a Keithley 6485.  I was able to get the HP to work in simulation mode (I don't have the hardware).  I am also trying to get the 6485 working in simulation mode.  The attached vi was provided by Keithley.  I configured a logical name in MAX, but this name doesn't show up as an option when I edit the "logical name" control on the front panel.  I changed the Initialize vi to Initialize with Options and added a command string control to set the mode to simulation, manually entered the correct name in the control, and ran the program.  No error was indicated in the Initialize vi.  After the configuration vi runs, however, the following error was flagged:
    Error -1074135023 occurred at IviDmm IVI Error Converter.vi
    Possible reason(s):
    Primary Error: (Hex 0xBFFA0011) Function or method not supported.
    Elaboration: FunctionId: 46,  FunctionName: ConfigureMeasurement
    Complete call chain:
         IviDmm IVI Error Converter.vi
         IviDmm Configure Measurement.vi
         KE6485_ZeroChk_LV86.vi
    This error is being generated by IviDmm Configure Measurement.vi, which is apparently installed NI code.  Specifically, the error appears to be thrown when Call Library Function Node is invoked and IviDmm.dll is called.  I wasn't able to track down any further info as to the meaning of these error codes.
    Thanks for your assistance.
    Attachments:
    KE6485_ZeroChk_LV86.vi ‏14 KB

    Hello,
    3rd party devices will show in MAX only when that device is listed at a specific place within your computer's registry. Non-NI hardware may not show up in MAX.
    As far as the logical name is concened, unfortunately, you will have to contact Keithley to get a better understanding of their code.
    You could download our IVI driver from the link below as you might have better luck with it.  You can find any of our 3rd party drivers at www.ni.com/idnet.
    Keithley 6485
    http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=238
    Regards,
    Shawn S. | NIC
    Instrument Driver/IVI PSE
    National Instruments

  • I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

    I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

    If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
    With the driver installed, add the printer via Printers & Scanners and see if you can print.

  • Is there compatible motion driver for LabVIEW 8.6?

    Is there compatible motion driver for LabVIEW 8.6? The latest motion driver seems to be 7.6 and it only support up to LabVIEW 8.5...

    If you buy LabVIEW 8.6, you will also get 2008 August Driver CD.
    NI-Motion 7.7 driver should be included in it.
    Or you can wait for a while.
    I guess NI will put on Web these days.

  • Is there a flash drive for the iPhone 5 so I can share

    Is there a flash drive for the iPhone 5 that I can plug into my phone, copy all of the hundreds of photos and videos I've taken of my baby nephew using the iPhone camera to, and then pull out so I can just give the drive to my sister? Downloading/transferring all those photos and videos to my computer, then emailing or sorting and burning them to a disc would take FOREVER. The photos and videos of the baby are all mixed in with my personal photos and videos I've taken and sorting them out would be a nightmare. Plus, I want the original photos and videos to remain on my camera even after I copy them for my sister. Any help/ideas would be most appreciated!

    Hi Allan,
    Thank you for responding.
    One clarification: I agree that the iPhone is not for long-term photo storage and I'm not looking to use it that way. What I'm looking for is a quick and easy way for me to get the photos/videos of my nephew to my sister so SHE can store them long-term. (Then I can delete all but a few of them and transfer them to my computer for storage pretty quickly and easily). The way I know to get all those photos/videos to her would take a very long time (which I don't have) and would require a lot of time sorting (which I don't have time to do either). Please don't suggest I pare down the photos and videos for her. This baby is a miracle baby and the Mom needs to get all the photos and videos. Understand where I'm coming from?
    Regarding not keeping any favorite photos/videos on an iPhone: It seems normal to have some favorite photos and videos remain on an iPhone, kind of like a "Grandma's brag book" of most beloved photos. Even the most no-nonsense person might have 20-30 photos of someone or something they love, so they can share them with interested people or peruse them when they want to feel connected or be grounded.
    I can't be the only person dealing with this issue/needing this type of hardware. Opportunities and need for photo sharing abound. If nothing else, it seems like an easy way for Apple to make a whole lot of extra money while making a whole lot of consumers very, very happy.
    Any advice? Again, thanks very much.

  • Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

  • Is there an Android driver for DeskJet e3520

    I have a Samsung Tablet that I would like to print to an HP DeskJet e3520 printer.  It appears that there is no driver for such an application, despite the fact that HP has an Android Tablet. 
    This question was solved.
    View Solution.

    Hello, and Welcome to the HP Support Community!
    There are no printer "drivers" to be installed per se on Android devices.  They need an app that can transfer the file, usually wirelessly to a similarly capable printer.
    HP offers the ePrint program (free in the Play Store).  Since your printer is ePrint-capable you can print two ways:
    1. Register the printer with HPconnected.com, and receive the email address you created for it.  Now you can email files as attachments to the printer (if you have it connected to your Wifi network at home!)
    2. Using the built-in "share" function in Adroid, you can "share" a file and direct it to ePrint.  
    Note:  The ePrint app must be activated first, with a code you request from HP.  Open the app to activate it.
    Note2:  The built-in "Print" function in Samsung tablets will only work if you have a wifi-enabled Samsung printer.  This is the way Samsung designed it.
    I'm going to move this post to the ePrint section where printing from Samsung tablets has been discussed many times.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • If there is no driver for iphone S4, how do I connect the phone and PC?

    If there is no driver for iphone S4, how do I connect the phone and PC?

    With the special cable that came with the phone. You must install iTunes on your PC in order to access the phone, sync it, and back it up.

  • Having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    Hi jaleesf,
    this video helped me. Printer/Scanner Fix With Yosemite No Matter What Brand
    -crazy

  • I need an IVI-Driver for a Tektronix TDS 5000

    IVI-Scope steptypes from TestStand require an IVI driver for the TDS5000. Any help ?

    The driver is not available now, but should be available on the begin 2003. Try use tktds7x4, the command set should be same from 90%. Only ranges will be different. Try use it. For sure try disable cache. If your application will required any ranges which are out of range for this driver. Disable range chacking too. I wrote this driver, so if you will have any troubles, let me know.
    Zdenek

  • Has anyone created a NI-VXI driver for the Ardence RTX operating system?

    Has anyone created a NI-VXI driver for the Ardence RTX operating system?
    a VXI instrument through a PCI-VXI-8335 card (in the PC) talking to a PCI-VXI-8345 card (in the VXI chassis) via MXI-3, Has anyone created a PCI-VXI-8335 card  driver for the Ardence RTX operating system?

    Now  i want  develop driver on RTX,my hard platform is similiar(PCI8335+VXI8340+1418A),and after i read the PCI baseaddress,i find PCI8335 only has memory-map,so that means if i want to driver this board ,so i take following steps list below:
    1.use Rtmapmemory() to map the baseaddress to virtual address
    2.using memset() or memcpy() to driver the 1418A board
    is this right?
    if you can give me some hints,thanks 
    or you can contact me :[email protected] 

  • There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD

    Hi All:
    We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
    We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
    testing phase but get the next error in the Monitor-Administrator Workbench:
    "@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
    8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
    We can see that the errors refers to the old (BWPCLNT800) Logical
    System Name; during the configuration of the RSA1 they renamed the
    Logical System Name of the BW System to BWNIUSA800.
    We found the SAP Note 518426 but we are not sure about if we can
    execute it without affecting the system or the configuration.
    Some one Can help us ?.
    Best Regards
    Reynaldo Rebolledo.

    Hi Reynaldo,
    this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
    BR Michael

  • There are no hierarchies for this InfoSource in source system

    Hello Gurus,
    We have recently created an extractor for the Country hierarchies, these are the steps we took:
    SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
    We informed the infoobject 0country and the characteristic KMLAND.
    We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
    We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
    Are we missing something in the process so that we may see the available hierarquies?
    Thanks!!! Points will be rewarded.

    Hi Sumit,
    You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
    Thanks for your help!
    Regards,
    Elder

  • There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE

    Hi All
    The above subject line shows the error.
    I have a custome data source in Development that is ZOUTNBR_TEXT which has a source system PC file.(flatfiles)
    when i transported all transfer structures and data sources from Development to Quality, only my transfer rules were not activated. but when i manually activated in Quality it throws with an error
    There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE
    Please let me know how can i activate my transfer rules.
    Archana

    Hi,
       We also faced the same issue while transporting from dev to QA. We raised a OSS, for which SAP has replied saying that there was some inconsistencies with the infosource and they have repaired the same in debugging mode. The root-cause for the issue is unknown. So they have not given any notes to us.
    But meanwhile we created a new data source and transported it. that worked fine.
    Regards,
    PM

Maybe you are looking for