Is there a known issue for using IE11 when using business catalyst cms

Is there a known issue for using IE11 when using business catalyst cms?  I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
Regards.

Similar Messages

  • DHCP lease issue for PPPoA sessions when using external DHCP server

    We used to use the Cisco 7206VXR's DHCP server to hand out leases, and when we lost several hundred customers on a link, the router was able to get them up and connected with an IP address within minutes.
    We switched over to using an external DHCP server so we could have more control over some extended DHCP options, as well as to aggregate all our DHCP traffic. Now, if we lose 100 DSL customers all at once, it takes 90 minutes for them to come up again. They come in a few at at time, until all 100 are back.
    We see waves of RADIUS auth's in our RADIUS log (RADIUS has always been handled externally, so nothing changed there), and continuous streams of DHCP requests come in and DHCP offers go out. What seems to be happening is that a whole bunch of modems auth with RADIUS, request IP addresses, but for whatever reason, timeout when they don't all get their lease, drop the connection, and retry the whole process all over again. We purchased a dedicated DHCP server, thinking that was the bottleneck, but performance is about identical.
    Here's our config:
    interface Virtual-Template1
    ip unnumbered Loopback11
    ip helper-address a.b.c.d
    peer default ip address dhcp
    ppp authentication pap
    ppp ipcp dns a.b.c.d e.f.g.h
    ppp ipcp unique-address
    My questions are:
    - is there any performance issue with using an external DHCP server and PPPoA
    - is there anything in our config that would cause such delays
    Frank

    GP:
    No, the DHCP server is not across a WAN link; there is only a 10/100 switch in between the router and the DHCP server. There are no dropped packets on the interface.
    I ended up opening a case with TAC about this issue. While I had the helper address configured in the template, TAC recommeneded that I specify the actual DHCP server with the command "ip dhcp-server x.x.x.x". This eliminates the DHCPBROADCAST (which I've verified). Perhaps the DHCP relay portion of the Cisco router is performed serially, instead of in parallel. By that, I mean, the next DHCPBROADCAST won't go out until there is the response for the first DHCPBROADCAST.
    I'll know in a few days when we test again.
    Frank

  • Are there any known issues for macbook pro freezing (applications mostly) because of internet fluctuations?

    Hi,
    I live in Philippines and our internet speed here is not very reliable.  It fluctuates a lot and sometimes, it would just drop to zero and then kick back in again.  I don't know why this is so - either it's our DSL or our router.  Nevertheless, I just want to know if there are issues with applications freezing in macbook pro (esp safari) due to internet fluctuations, causing the color wheel spin and the my laptop freezing for few seconds or sometimes minutes.  Everything would freeze, all I can move is my mouse and thant's it.  Usually, if an application is not responding, it's only that application. But l noticed this time it's causing the whole system to freeze.  I just recently upgrade to Mountain Lion.

    Welcome to Apple....
    Kumusta Ka?  Ma init pa dyan?
    If you're browsing the web and you're internet connection is slow or sometimes dropping, it is normal for Safari to hang or freeze for a little bit until it connects to the site you're trying to view or visit.
    Try this - go to system preferences - network - advance - dns and change your dns server.
    see image below - let me know if na ayos mo na ang internet mo.

  • Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

    I've had Yosemite for some time and bought/installed PSE 13 afterwards.
    In the last few days I upgraded to Yosemite 10.10.3.
    As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
    I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
    Are there any known issues with PSE 13 post 10.10.3 upgrade?
    Are there things I should be concerned about in the future before accepting an OS X upgrade?
    Thanks,
    Andy

    No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

  • Is there any known issue about mutex lock used in JNI on Solaris 10?

    Dear Oracle,
    I'm facing a strange behavior when running a JNI application that use the mutex lock. The application hanged after running for a while on one of our Solaris 10 machines. After investigating the stack trace of the application, it shows that one of all the application's threads that access the JNI hold the mutex lock forever, and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
    The mutex function I used as show below:
    mutex_lock(&mutex)
    The application hanged at this line:
    0xff2cc940 ___lwp_mutex_timedlock + 0x8
    The Kernel version is SunOS 5.10 Generic_142900-14
    Since this issue occurrs on only one Solaris 10 machine in our environment, we are wondering if there is any known issue regarding the mutex lock used in JNI on Solaris 10. We tried to search the Internet and the Java Bug database but found nothing related to this issue.
    Best regards,
    Krit K.

    876587 wrote:
    ... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
    Different environments mean just that. So something could be causing it outside java.
    Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
    Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that.

  • "...safari, there are known issues"..wanted to know has that been resolved? If yes, can ask that message be

    If u r trying to book an appointment with US visa office, ustraveldocs website is the place . It was dissappointing to see a message posted "do not use safari, there are known issues"..wanted to know has that been resolved? If yes, can ask that message be deleted...since this happens to be a US govt website, it puts really lot of strain on the users seeking appointment via ipad mini...we have to find non safari browser, then complete appointment process...http://www.ustraveldocs.com/in/ is the website where one comes across that message while making payment for booking appointment....is that a known issue?...

    Someone posted today (9/19/06) on the MacInTouch forums that they just got their MacBook back from repair for RSD, and the replaced parts were:
    APP-630-7872 PCB, MLB, 2.0GHZ DC, SMS/KIONI
    APP-607-0142 ASSY, HEATSINK, M42
    This is the first post I have seen that shows a different part number for the heat sink than the one for my repair from almost a month ago:
    APP-603-8071 ASSY, HEATSINK, M42
    Perhaps interesting.

  • Are there any known issue with the HP 3005pr USB 3 replicator ?

    Hi,
    I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
    Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
    I'd like to be able to leave the laptop closed when at my desk so I can use  an external keyboard, mouse, and monitor.
    Does HP make this device or does a 3rd party make it for them?
    I've read so many stories on various forums regarding these things.
    Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
    thanks,
    Steve

    This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

    Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

    Welcome to Apple Support Communities
    Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics

  • I have a mac book pro mid 2011 and it overheats is there any known issue with this model

    overheating issues
    I have a mac book pro mid 2011 and it overheats is there any known issue with this model

    Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
    Clinton

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • I've been getting "Unknown error" a lot lately, is there a known issue here?

    "Sync encountered an error while syncing: Unknown error."
    I have been getting this error lately across multiple desktops. Is there a known issue recently introduced into the Firefox 4 beta series?

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults/new iPod.

  • Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

    Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

    To answer the obvious question. No. None that I've seen. But it may depend on what you mean exactly?
    Connecting to file sharing service - None that I've seen
    Connecting to Open Directory (assuming proper configuration) - None that I've seen
    Using the Server's Mail Service (assuming proper configuration) - None that I've seen
    I can say the same about anything else the Server may or may not be offering.

  • HT5521 I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length.  It seems to me it is taking much longer than a 1m cord to recharge.

    I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length?  It seems to me it is taking much longer than a 1m cord to recharge.

    Axel,
    I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
    Rinse and repeat: did this 3 times. Then I found this analysis:
    http://lkcl.net/reports/ssd_analysis.html
    I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
    - buy an Intel S3500!
    - add commit=1 to my mount options in /etc/fstab
    - edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
    Just my two cents.
    Andrea
    Last edited by andreius (2013-12-29 16:51:04)

  • Are there any known issues with focus stacking or auto align causing PS to stop responding?

    Are there any known issues with focus stacking or auto align causing PS to stop responding?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Are there any known viruses for Mac?

    Are there any known viruses for Mac?

    Not yet!
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    (I have ClamXav set to scan incoming emails, but nothing else.)

Maybe you are looking for