Is there a known problem with the latest Shockwave player for Windows that will reboot a user without notification"

This problem is not with the actual Shockwave Application but the patch. Thanks!

This behavior was first observed with the 12.1.6.156 patch. The command line used to install the patch is: sw_lic_full_installer.exe /S. The /S switch installs the patch silently.  However, in some cases, computers reboot without prompting the user

Similar Messages

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • Are there any known issues with the latest update to iTunes on Windows 7 maxing out the processor and nearly bringing the system to a hault.

    Has anyone experienced an issue with the latest update to iTunes (11.2.0.115) for Windows where iTunes pegs out the processor at 97%, 98%, and holds there for maybe 15 minutes before dropping to 50%. During that time, the system is basically useless. You just have to ride it out. I'm running Windows 7 Home Premium.

    Hi OnceBeforeIDie,
    Welcome to Apple Support Communities!
    Take a look at the article below, it has some some tips that will resolve a performance issues like the one you described.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    -Jason

  • Is there a known problem with the iPhone 4 personal hotspot? I have not been able to use this feature for about 3 days with any of my other idevices - it does not come up as available.

    My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
    Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
    Oh and I have spoken to my carrier it is not them.
    Any suggestions?

    Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
    Restart (hold on/off button >> slide to power off)
    I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5

  • Just admit there is a problem with the latest update.

    Why keep telling people to uninstall, install, update, test, check, double check, test again....When all the solutions being suggested just don't work for most people.
    There is obviously a big problem, over the last two days i have done almost everything that has been suggested, and more, and still there is a problem on both computers in my home.

    Hi, What you are describing is called Troubleshooting. It would be very easy if your opinion was true, but it isn't. Have you ever read the multiple Microsoft, Firefox, Apple, Motorola, AT&T, Sprint, Verizon, HP, Youtube and Dell FORUMS? Well, I have and do and I can tell you I'm surprised that Adobe Flash Player can design a Flash Player to work in and around all of those Operating Systems and Technology Companies!! And there are hundreds of more companies that I do not have time to mention.
    And no, I am not an Employee of Adobe.
    Not every solution is going to work for every computer configuration, that is #1.
    When people take their computers in for repair, there is an advantage, to wit: they have the computer and they can see and test it.
    Here on the Forum, we that help don't have that advantage. That is why the questions are asked and various actions are requested.
    If you want help, reply back with your operating system and browser(s) versions.
    Thanks,
    eidnolb

  • I think there is a problem with the latest version of Firefox. When you minimize one window (doesn't matter how many tabs) on Mac, it automatically minimizes all of the other open windows. This never used to happen.

    Whenever you have multiple windows open - say one is your Gmail account and the other is a bunch of pages you're using at work - and then you go to minimize the window with Gmail but intend to continue working on the other open windows. Using Command-M (the minimize shortcut for Macs) unfortunately now sends all open windows to the minimize bar in the lower right. Which means - every time I go to look at Gmail, then put it away, I have to reclick to open all of the other windows I was working in. Can this be fixed? It never used to happen.
    == This happened ==
    Every time Firefox opened
    == I upgraded to the latest version of Firefox

    Because OS X 10.4* does not have what is needed by Firefox 4.0 and newer.
    Linux users are in a similar boat also as they need certain package versions within the last few years as LTS distros (with outdated packages from 4+ years ago) like CentOS is a bit screwed on newer applications like Firefox 4.0. By your logic Mozilla should also support Linux packages from 10 years ago also which would be a really ridiculous thing to do.
    I think only the 64-bit Windows Vista and Windows 7 is really supported or will be rather when it comes to 64-bit builds (still not officially supported yet).
    Mozilla is still supporting Firefox 3.6 with updates, in which 3.6.16 can be found at http://www.mozilla.com/en-US/firefox/all-older.html

  • Is there a known problem with the new FF update? My computer keeps hanging and I am having to either force quit or power computer off.

    This is been happening every time I use FF since update.
    I have a Mac and have never had any problems like this.
    Does not happen when use Safari Browser.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • My Firefox crashes 2-3 times per session since I've updated to new version. I have never crashed before this latest version. Is there a known problem with this?

    My Firefox crashes 2-3 times per session since I've updated to the latest version. This has NEVER happened with previous versions of Firefox. Is there a known problem with the latest version?

    Hello luv2golf80, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
    #Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
    #Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

  • I keep getting a message about a problem with the plug in container for firefox. what does it mean?

    I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

    It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
    Make sure you update all your plugins and disable unwanted ones.
    https://www.mozilla.org/en-US/plugincheck/
    https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
    Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

  • There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

    For home use, I recently changed from Windows PC to MacBook Air.  I have an iPhone 4 which I synched without problem to the PC.  Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office.  Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
    The latest problem is Outlook does not complete startup.  I get this error:
    There is a problem with the Outlook database.  To use the database, you must rebuild it using the Database Utility.
    I run the utility but it never completes successfully. 
    Step 1 of 5: Scannning...
    Step 2 of 5: Verifying...
    Step 3 of 5: Copying records to new database...
    Step 4 of 5: Recovering data...
    Your database could not be rebuilt. [-18000]
    I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
    What if I Outlook never completes startup?

    Here are the steps that solved the Outlook data corruption problem.
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
    The question was:  Your database could not be rebuilt
    The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
    It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

  • When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

    when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

    Hi
    I've got a similar problem.  iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error.  I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified" 
    Any ideas?
    Rick

  • There is a problem with the Office database - Office 2011

    Good day!
    I recently installed Office 2011 for Mac and i'm getting the following error message: There is a problem with the Office database. Excel comes up with the error message but i am able to get past the error and open the application, but it freezes when I try on Word. I have to force quit the application to close it completely.
    I've searched online and tried all the suggestions - even those from the discussion board: Problem with Office Mac 2011 database. I've completely removed traces of the software : http://support2.microsoft.com/kb/2398768 and reinstalled using the disc,  as well as followed suggestions to rebuild the database. I also installed the latest Office update: http://www.microsoft.com/en-us/download/details.aspx?id=44026 from Excel (As it was the only one I know of that's functioning after the error message) but to no avail.
    Here are the tech specs:
    OS X
    version 10.9.5
    Office 2011 for Mac
    Version 14.4.4 (140807)
    Update: 14.4.4
    Hope you guys can point me to the right direction. Any suggestions are greatly appreciated.

    Best ask question on one of the Microsoft boards.
    Could try NeoOffice.
    https://www.neooffice.org/neojava/en/index.php

  • HT1567 i can not sync my new purchased music into my ipod, it states there is a problem with the drive

    i can't sync my new purchased music into my ipod, it states there is a problem with the drive.

    Hey Texasdee07,
    I found the following information that should resolve the issue:
    To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
    Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
    via: 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    http://support.apple.com/kb/HT1207
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • My computer crashes when I export from Premiere Pro cc.?  Also, is there a known problem with Panasonic HC-V720 footage?

    Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

    Ask in http://forums.adobe.com/community/premiere/content
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

Maybe you are looking for

  • Saving web pages in Safari for Windows

    Is it possible to save the whole web page (not just text, but also images etc) with safari? When I go to File>Save as, it saves only text as htm file and doesn't create any folder with images, if you reset Safari or try to open this file with any oth

  • Need SAP Crystal Report formula for Blance Quantity

    Hi,      i really need a formula for SAP Crytal report my requirement is     i have group 2 Groups  one on sale order and another one on Invoice    Example:         ================================================================           Order No:1

  • Need Sorter java  file   for sorting the records in webdynpro java

    Hi  Gurus    I  had urgent requirement please give your inputs    In my webdynpro java i need to sort entire records in table    I now we need One sorter java class please provide that java file    please suggest the all the steps how  to do Thanks r

  • Need to capture entire contents of a mini DV

    What is the easiest way to capture entire contents of a mini DV? Must I create an offline clip and specify the media start and end points and do a batch capture, or can I use Capture Now? Thanks, John Link

  • CFIMAGE gives "attempt to read data outside of exif segment" error when trying to resize jpg

    When trying to resize a jpg using cfimage I receive the following error "attempt to read data outside of exif segment".  Any ideas on what causes this or how to fix it?  This only happens on certain images.  Sample image it happens with attached, thi