Is there a limit for external links in TOC using RoboHelp 9.2?

Hi,
This is my first time posting to the Adobe forums. Here is my problem.
I have been maintaining help projects using RoboHelp 9.2 for quite some time now to generate WebHelp. I now have four large projects that are linked through a URL in each project's TOC. Example: I have projects A B C D. In A's TOC, I include a link to B C D default topics. In B's TOC, I include a link to A C D default topics. And so on ... The fourth project (D) is new.
The problem I've encountered is with the image appearing in the TOC next to the external link entry for project D in the generated WebHelp. The image showing up for project D is different from the other two, even though the properties for that page are exactly the same as the other two. This happens in all three remaining projects (A B C). Even when I change the image (from the image index), the same image (i.e. the standard image for a topic page) appears regardless.
What should appear in all cases is image 13.gif.
(I'll have to figure out later why 19.gif is selected in the properties dialog, whereas 13.gif is actually showing up in WebHelp. Doh.)
Any ideas?
thanks,
denise

karl219 wrote:
1-Time machine seems to be coming up often in the discussions.If my backup is on my external hard drive, why would space be taken up on my macbook hard drive?
Read the first extract for the definition of backup snapshots and how they are handled by the OS.
2-Shoud I delete older backups? If for example, all I need from Time Machine is the latest backup done today, can I get rid of the 2+ yeras of backups, or do they not take up that much space?
No. Time Machine should be on a separate HDD and will take care of deleting backups when necessary on that drive.
3-Back to the issue, considering I don't have access to a an apple store for the next few months, what is my best plan of action?
I would consider installing a larger internal HDD. Capacities to 1 TB are now available.
4-I am considering buying a new macbook 15inch, and get more space, however, I'm scared that the same problem will happen again. Is this common on all macs? Will using Time Machine to "Restore" my backups bring along the issues as well?
All Macs using Time Machine will experience the same conditions. The problem is that many users do not under stand what 'Other' is and that leads to confusion. There are many essential OS files in that category that should not be touched as well as some user files. The issue is not to reduce 'Other' as such, but reduce the total amount of data on the HDD if space is becoming a premium.
Please read these two extracts:
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
Ciao.

Similar Messages

Is there any limit for VISA allocate DMA memory ?

Hi,
I have get an error: -1073807300, when I allocate memory for DMA larger than 4M Bytes.
Is there any limit for allocate memory for DMA ?
I have run the attach vi on win7 32bit or 64bit, It seems there is a limit at about 4M Bytes.
However I can allocate memory more than 20M Bytes on WinXP system.
Is there any solution for win7 to allocate memory more than 4M Bytes ?

I altered the VI to loop from 1M in increments of 1M until it errored (as fast as it could) and then output the farthest it got without an error. Here is what the plot of those highest allocations looks like and attached is the VI.

Is there any limit for DAQ_Start()'s count parameter?

Is there any limit for DAQ_Start()'s count (the fifth) parameter? It seems that the limit is between 16 million and 18 million. I use PCI-MIO-16E-1 and LabWindows/CVI.

Hello,
This depends on whether you are performing a single-buffered or double-buffered acquisition.
In a single-buffered acquisition, the "count" corresponds to the number of samples the DAQ device acquires and is an unsigned 32-bit value. The largest number that this number can represent is (2^32)-1.
In a double-buffered acquisition, the "count" corresponds to the size (in number of samples) of buffer that fills up in a circular fashion. It must be an even number. The range of this value depends on the DAQ device you are using and can be referenced by the chart located in the NI-DAQ Function Reference Help file. To access this file, go to your desktop and click [Start]>>[Programs]>>[National Instruments]>>[NI-DAQ]>>[Traditional NI-DAQ Function Reference
Help]. Then, search for "DAQ_Start" without the quotations.
I hope this helps clear up any confusion. Please let me know if you need any further assistance. Have a great day!
Regards,
Joe Des Rosier
National Instruments

Is there a limit for the Account Transformation Table?

Hi Gurus,
I am anxious to know is there a limit for the or any particular number for maintaing Account Transformation table. 2) If many rules are existing in the Table, will it cause any performance issue.
Regards,
KumarMG

Hello Kumar,
I endorse the view expressed by Lokesh. Yes, there is no limit to the number of Account Transformation Rules that you can maintain in the Transformation Table. One way to limit this number is to use carefully maintained hierarchies instead of specifying individual accounts in the Rule. However, this is not always possible - but will help limit the number of entries in the Account Transformation Table. To create Cash Flow Satatement, you have to anyway use the Account Transformation Rule and surely this would stretch the number of entries in the table. For a complex requirement, these might extend to a few hundred entries. Performance will be an issue, no doubt.
Chakrapani

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space.

Is there a limit for adding universe restriction set

Hi Experts
Is there a limit for adding universe restriction set?
Can i have more than 100 or 1000 universe restriction set?
Thanks!

Hi,
There is no limit set.
Look at this document too for some knowledge.
[http://www.dataspace.com/Downloads/IA_Final_MD.pdf]
Regards,
Bashir Awan

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

BI7.0(Stack 11)-3.X Analyzer- Is there any limit for Free Characteristic?

Hi All,
We are on BI 7.0 Stack 10. . The same happens in Stack 11 too.
Problem : Looks like when a query with 101 or more free characteristic is executed in 3.X Bex Analyzer, the swapping of the characteristic will bring different characteristics. Even the Add drilldown also does the same.
NOTE: I just have a single key figure in columns and a single characteristic in row.
For Eg: If I swap country with city, then instead of city it might bring employee.
This does not happen if the free characteristic is = 100. if it is greater than 100 then it does a bad swapping or drilldown.
NOTE: I did not see this problem in the 3.X web runtime.
As per sap's help there is no limit for free charcteristic. Please see the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
Please let me know if anybody else came across this problem or any OSS note available on this.
Thankyou,
-Sini

Photoshop > Preferences > Interface > Show Transformation Values

Disable warning dialogs for external links in PDF?

Greetings. I'm at the final stages of an interactive PDF and during the review cycle, the client is noticing warning boxes each time they open a link to an external web address. I'm fairly sure that if you are using a purchased Acrobat instead of the free reader, you have the option on the first external link to allow access for all links. But, if you are using the free reader, every time you activate a different external link, you must "allow" it to open (is this true?). Those messages are annoying the client (in spite of the wisdom of the security). Is there anything I can do on the creation side to disable those warnings?
The document is being created using InDesign CS6 in OSX-10.9.5.
Thanks!
Tim

The warnings can be disabled by configuring their security user preferences, which are the same in Acrobat and Reader. In Reader 11, look at:
Edit > Preferences > Trust Manager > Internet Access from PDF Files outside the web browser > Change Settings

Is there any limit for Views

Hi All,
Is there any limit to have maximum number of views in the webdynpro appliation?
Regards
DS.

Hi,
You can have any number of views inside a component. But at a time you can choose only one window interface having one startup view.
You can relate any number of views using plugs or viewContainers to a particular views as per your requirement.
Having lot of inter-related views will cause problem while creating portal iviews.
thanks & regards,
Manoj

Is there a limit for the size of video in iCloud?, is there a limit for the size of video in iCloud?

I recently updgraded to the iPhone 5S from the iPhone 5. Prior to using the the 5S i backed up the contents to my 50GB iCloud storage.
Unfortunately I have found that some of my videos were not downloaded to my new phone.
Is there a limit on size that icloud will accept? I have I lost my videos?
Cheers
redman69

The number must be stored in some internal structure
like an array. And there's a limit on the size of an
array, because the maximum index you can use is
Integer.MAX_INT. So it follows that there must be a
maximum BigInteger value too.Why can't it be split into 2 arrays when it overflows the first? I don't know the actual implementation, but it could be of relatively unlimited size.

Is there any limit for Number of fields to be shown from grid dictionary in service?

I am getting an error in service designer -> Dictionaries if i select more than 20 fields in grid dictionary. PSC is 10.0

This is documented in the Service Designer guide.
Show in Grid
Fields set to “Show in Grid” and “Use” in a dictionary will display as columns in the grid on a service form when the dictionary is set to “Display as Grid”. “Show in Grid” and Multivalue are mutually exclusive, as a grid does not have the capability for a multivalue cell. Grids cannot have more than 20 columns by default, which is defined by “dictionary.attributes.maximum.showingrid.count” property in the newscale.properties file.
Note Fields in External dictionaries cannot be used in grids and hence do not have the “Show in Grid” column. Also, fields in Reserved dictionaries (Customer_Information and Initiator_Information) cannot be used in grids because those dictionaries inherently represent only one set of data. See Designing Grid Dictionaries for Fields with Multiple Data Instance for more information on grids.

External links in TOC not opening in separate instance of IE after convert to RH7

We converted our FlashHelp project from RoboHelp 6 to
RoboHelp 7. External links in table of contents were set in the
Advance tab to open in a New Window. This worked fine in RH5 and
RH6 but when converted to RH7, the external link opens in the topic
pane.
Links within topics that link out to external web pages or
documents are set to open in New Window and these work fine.
Why would the Advance option for New Window work differently
as a hyperlink in a topic vs. a link from the table of content? How
do I fix this? Don't see any documentation in help system.

fixed via in one of the releases to RH7

External link in TOC item cannot be changed, it keeps returning to previous link

I am using RoboHelp 9 WebHelp Pro publishing to RoboHelp Server 9. I just imported an existing project (and went through the upgrade process) and am now trying to make some changes to my project prior to publishing. One of these changes is to change the hyperlink / file path to a TOC item. For some reason I can make the change, however when I try to accept it and publish, the path returns to the original path. I am unable to change this path to a new one. Does anyone know of a solution?
Does anyone know if this may be related to my other issue with this project where turning the Search option for Context off is not being applied ? (see: http://forums.adobe.com/message/4743109)

Are you saying that your change is accepted in the RH interface but that after you publish to the RHS that the link still points to the old path? If so check your unpublished files (click View from your WebHelp Pro SSL) and see if that works. If it does try restarting your Tomcat service (if you are using Tomcat) and deleting your browser cache. Another way to prove where the issue is would be to create a new RHS Area and publish to that. If it works there.
Personally I wouldn't say this is related to your other issue.

Is there any limit for Number of fields in a Search help

Hi,
I have created a search help via SE11 and LPOS and SPOS is defined for all of the fields. The problem is whenever a 12 th field is added it disturbs the list and output is not displayed properly.
The Record Tab is having data of 180 characters, even though it is not taking 12 th field.
Thanks,
Anitha A

Self Answered
Edited by: Anitha A on Aug 24, 2011 5:43 AM

Is there a limit for external links in TOC using RoboHelp 9.2?

Similar Messages

Maybe you are looking for