Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab  is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in  Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

Similar Messages

  • Is there a limit to number of SNASW links?

    We have an IBM 3745 with T/R which we disconected and attached a router with SNASW instead. Same macaddress as the 3745. It went fine first but when a lot of people started to logon they hit the wall and the SNASW stopped to respond to new connections. We do not use Virtual T/R, just a plain physicall interface with a SNASW port statement connecting the thing. Is there a limit somewhere?
    Regards
    Bjorn

    Hi Bjorn,
    You can issue show snasw link and specify the port name to see just the links using that port (don't be fooled by the Total links count ... that is the total for all links on all ports).
    Bob has told you how to spot the situation where you are hitting the max-links limit.
    However, based on your previous updates I suspect you have a different problem. Are you still seeing 08060000 in the pdlog? If so, that means there is a problem with the switched major node as Tran pointed out.
    You mentioned earlier that the customer is getting frustrated. If that is so then I suggest you open a TAC case and collect the traces that have been recommended. With the correct documentation in hand this should be a very quick resolution.
    - Ray

  • Is there a Limit on number of authorization objects in a role?

    Hi all,
       Is there a Limit on number of authorization objects in a role because I am getting the following error.
    Authorization is full. Please enter fewer values
    Message no. 01262
    Diagnosis
    You have included too many values in an authorization.
    Procedure
    Please distribute the data to at least two authorizations and combine them in a profile.
    Thanks.

    Hello Neha,
    Message no. 01262 refers to the entered values in an authorization, not to the objects listed in the profile!
    So this message tells you, that you have to split the authorization, as the authorization contains too many values. It is not a quesiton of that you have entered too many different objects to the profile!
    Please refer also to:
    [SAP Note 410993|https://service.sap.com/sap/support/notes/410993]
    and
    [SAP Note 943796|https://service.sap.com/sap/support/notes/943796]
    b.rgds, Bernhard

  • Is there a limit of number of questions in this forum?

    Because I posted some questions which were removed..

    Is there a limit of number of questions in this forum? No, but forum etiquette strongly suggests you keep a thread on any individual topic continuous (that means together no matter how long that thread might become). So, you should NOT post separate individual questions for every tiny nuance you might have.
    The inherent nature of a forum is that thread topics get spread far apart as time goes by. If your inquiry is splattered into individual new posts, they WILL get scattered and your topic will no longer make any sense.
    Anyone you hope to respond to you will lose all focus on the topic and will just no longer try to give you answers.

  • Translation Manager: Is there a limit of number of languages per Universe?

    Dear All,
    can I translate Universe content to up to 20-25 languages with Translation Manager for each Universe?
    Is there a limit?
    Kind regards, Martina

    Is there a limit of number of questions in this forum? No, but forum etiquette strongly suggests you keep a thread on any individual topic continuous (that means together no matter how long that thread might become). So, you should NOT post separate individual questions for every tiny nuance you might have.
    The inherent nature of a forum is that thread topics get spread far apart as time goes by. If your inquiry is splattered into individual new posts, they WILL get scattered and your topic will no longer make any sense.
    Anyone you hope to respond to you will lose all focus on the topic and will just no longer try to give you answers.

  • Need screen number for object link

    Hi..
    Please can anybody provide me the screen number for object link.
    Me31k     Contract
    Me31L     Schedule Agreement
    Cj33     Budget release
    Im33     Segment budget
         Rental Space

    Hi Sandy,
    all the standard object dynpro numbers can be found in function group CV130. You can open this function group in transaction SE80 and go to folder 'Screens'.
    Best regards,
    Christoph

  • Object link to STPO_DOC cannot be changed in this transaction

    Hi All,
    I am linking the BOM to Document info record, where I am getting a message as "Object link to STPO_DOC cannot be changed in this transaction".
    It is working in other way, when I go in BOM header and Link the Document, it is reflecting in the Document inforecord.
    Object links maintained in DC10 settings for
    STPO_DOC
    STKO_DOC
    Need your suggestions on this problem.
    Regards,
    Venu

    Hi Venu,
    those links were designed in order to support Digital MockUp (DMU) in the Engineering Workbench, the CAD Desktop and the Produktion Order. The idea here is, that via the CAD Direct Integrations those links to the Documents are set automatically, also the transformation matrix and bounding box is transfered.
    So a maintenance via the Gui is not supported, as far as I know. Only via the APIs.
    Best regards,
    Martin

  • I have a 19 digit Adobe Photoshop Elements 12 Serial number.  It should be 24.  Any help with this?

    I have a 19 digit Adobe Photoshop Elements 12 Serial number.  It should be 24.  Any help with this?

    Where are you looking for the serial number?
    If you have the disks, the number commencing 1057 is usually inside the packaging. It’s necessary to pull out the white inner box.
    If you purchased this some while ago and the product, the serial number should be in your Adobe account. Click on the red Adobe logo (top left on this web page) sign-in with your Adobe ID (email & password) and choose Manage Account. You should be able to browse your purchase history and registered products.

  • PS roles for making object links between cProjects and PS

    Hello to everybody!
    Does anybody could give me a favour and tell which role I should grant to the user in order to allow him make object links between cprojects and PS elements from cProjects. I have already granted authorization to CJ01, CJ02, CJ03 and CJ20N transactions, but JA 027 == No authorization for action Display === error message still occurs. SU53 shows that everything is OK. 
    Thank you.

    Hi,
    I´ve the same problem, I´m in tx CJ20N but I don´t know how to add my user in Access Control List (ACL) in CJ20N
    Could you explain me how I can do that?
    thnaks a lot and best regards, Sapera

  • Is there someone at Verizon that still cares about their customers and will help make this right??

    I have spent hours on two phone calls and a chat session regarding a billing discrepancy that is THE FAULT OF VERIZON and still no final resolution.  My bill is due in 3 days and I want this resolved now because I don't want to not pay a bill on time because it won't be corrected in time and then my credit rating will fall due to THE FAULT OF VERIZON.  I have been working on this problem for OVER TWO WEEKS and TWICE have been told that it was all set and that billing was being told to credit my account, yet STILL NO CREDIT HAS HAPPENED.  One rep gave me his email address so that I could follow up with him in case something went wrong with the credit.  I have emailed him and GUESS WHAT?  NO RESPONSE.  I have been a loyal Verizon customer for over 15 years with all bills always PAID ON TIME and THIS IS HOW I GET TREATED??   NOT FAIR.  This is so unlike me to write something like this in a forum, but I have had it after receiving THE WORST CUSTOMER SERVICE EVER.  WHAT AM I SUPPOSED TO DO NOW TO GET HELP?  Is no one at Verizon support HELD ACCOUNTABLE FOR VERIZON MISTAKES??  A VERIZON representative listened to what I needed for business travel and they gave me the added feature that they assured me would be what I needed, and apparently it wasn't right. Is it my fault that a Verizon representative does not know the right answers to how their features work and now I am expected to pay OVER $300 EXTRA BECAUSE OF THEIR MISTAKE?  When I take the advice of a Verizon rep I expect they know what they are talking about and that the advice is accurate.  APPARENTLY THIS ISN'T TRUE.
    Is there someone at Verizon that still cares about their customers and will help make this right??

    After ANOTHER call I may be on track to resolving this.  But WHY did it have to take several calls and chats over a two week period?  WHY did I have to become a mean person to the representative on the phone to finally get this (partially) straightened out?  Why does it need to come to that?  I really don't want to have to get mean and get myself worked up just to get a billing problem straightened out that is VERIZON'S fault.
    Verizon, please consider looking into your lack of proper customer support and make corrections.  Even though this may be resolved, After 15 years of being a Verizon customer I will be considering another carrier when my contract runs out and all due to this horrible customer service experience. 

  • Is there a limit to number of devices you can simultaneously sync to one itunes account?

    Is there a limit (set by itunes or elsewhere) to the number of devices you can simultaneously sync to one itunes account/PC/Mac? Using USB hubs or other sync/charge devices?

    iTunes can only sync one device at a time.
    There is no limit to the number of devices you can sync consecutively with the same library.
    Each device can hold protected content from up to five accounts.
    Up to 10 computers and iOS devices can be authorised for automatic downloads of an Apple IDs available purchases (some items may only be downloaded once).
    Up to five computers can be authorised to each Apple ID at any one time.
    tt2

  • Is there a limit on number of SANs in Lync certificate

    Hi,
    We are in the process of deploying Lync 2013 for a very large client. They have multiple companies and multiple sister companies. We are planning to use a single cert for the whole deployment. Net / Net 120 - 130 domains.  
    My question is, is there any limit on number of domains in SAN of the certifiate. Has anyone used SSL.com for UC certificate.
    Regards,
    Lisa

    Have you looked at Joachim Dissing's blog about handling many sip domains? http://exchangepro.dk/2014/01/13/how-to-handle-many-sip-domains/ You might want to also check
    out the Lync 2013 Hosting Pack: http://www.microsoft.com/en-ca/download/details.aspx?id=39101
    As for Third Party CAs I believe the limits are:
    DigiCert: 25 domain names
    GeoTrust: 25 domain names 
    Thawte: 25 domain names
    Symantec: 25 domain names
    GlobalSign: 100 domain names
    GoDaddy: 100 domain names
    Entrust: 100+ domain names
    Comodo: 210 domain names
    SSL.com: 2000 domain names
    Keep in mind you should choose a provider that is an approved UCC provider: http://support.microsoft.com/kb/929395/en-us
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Is there a limit to number of recipients for an email?

    I need to send the same email to about 250 people.
    Is there a limit to the number of recipients Mail can handle in the BCC field?
    At the moment I can get all the address's from a spreadsheet as Comma separated text.
    Will this pasted into the BCC field work?
    Lion 10.7.2     Mail 5.1
    Thanks in advance
    D

    You will need to check with your ISP; they may have limitations - mine does in order to cut down on spamming.
    Once you find out if/what that limit is, you can simply type and email once, copy the content, enter the addresses, and send out 5 - 10 - or whatever number of emails successively until you've sent it to all 250 people.
    I would create a group or at least have all the names/addresses in the Addressbook; that way, you can start typing the first name and Mail will automatically add the email address for that name. And yes, it is good to use BCC for that - send it to yourself and BCC everyone else.

  • Is there a limit to number of items in Netbeans 6.5 "Flow" screen?

    Hello,
    I am using NetBeans IDE 6.5 to build a Mobile Application using NetBeans 6.5, and I seem to have hit a limit with the number of Items that I can add using the "Flow" development process. I can still drag and drop items from the Palette onto the Visual Designer, but the source code for any item that I add does not end up in the program.
    Does anyone know if there is a limit to the number of items that can be placed on the "Flow" Visual Designer? Or is there some setting that is not set properly for the code to be added to the source code. It has been working just fine for a while, so I can only assume that I have hit a limit, or that I have changed a setting that now makes it not change the code.
    Any help in this situation would be greatly appreciated.
    Thanks.

    Yup... you can have up to 99 tracks, including stories and slideshows in that number.
    However, there is really no reason to have one clip per track... you could put several (or all 80) into a single track if needs be.

  • Is there a limit to number of images in Lightroom4 web gallery?

    What is the total number of images that can be in a LR4 Web HTML Gallery?  Is there a limit?  I am using Mac OS LION.

    I thought at sometime there was, I did a two day corporate event with around 1,000 attendees. Client wanted published on their internal web site and over the two days there was well over 1,000 images
    With my perceived LR 3.4 limit (and I could be wrong about the limit) and the fact I only had a few hours to deliver I used a freebie software package XnView which worked out just fine in creating a web view. Never got around to testing with LR

Maybe you are looking for