Is there a limit to Azure Baidu push? What are the tech specs around delivery?

Is there a max_allowed_push_sent/unit_of_time?
And, is there any information regarding send rate? e.g. We can send 1 million push minute, or more? Or less?

The performance metrics you ask for depend a lot on the customer scenario and their usage pattern. Typically for broadcast scenario, we are able to process 1 million sends in 1 minute. The latency in delivering the notification to the client devices has
to additionally take into account the intermediate PNS and differs based on the PNS though PNS is able to deliver the notifications usually in a few seconds unless it is throttling for some reason.
- Piyush

Similar Messages

There is a new DSM 2.0, but where are the tech specs?

Dear SDN Community,
After the upgrade of one of our Portal systems from SP15 to SP17 we see that there is an additional configuration item in the System Objects availible.
The new property it technical ID is: wap.ITS.SAP_Session_Management
The description of this new property is:
If set to 'Yes', the SAP GUI for HTML application is started with parameter 'sap-sessmgt-version=2.0'. If set to 'No' the parameter 'sap-sessmgt-version' is omitted and the SAP GUI for HTML works with the deafult Session Management (SISP 1.1).
Now I already found the following notes...
Note 1235237 - WebGui Transaction iViews (ITS) support DSM 2.0
https://service.sap.com/sap/support/notes/1235237
Note 1233321 - ITS support DSM protocol 2.0
https://service.sap.com/sap/support/notes/1233321
...but they do not give me an answer on: "whats new", "why its better" etc etc.
Can someone provide me this info? or a link to it?
Thanks in advance!
Benjamin Houttuin

Dear SDN Community,
Because I realy wanted to know the anwer I raised a (low-prio) message at OSS for it.
Today I got an answer:
17.09.2009 - 08:11:02 CET - Reply by SAP
Dear Customer
After discussing your query with one of an expert following is the
answer to your query :
The major new features with SISP 2.0 are support for Suspend/Resume
notification and performance optimization in the navigation. Basically,
SISP 2.0 allows to differentiate between a navigation away and a browserclose (in SISP 1.1, both cases are signalled by a USR_ABORT command,
whereas in SISP 2.0, the navigation away is signalled by a USR_SUSPEND
command, this command is new to SISP 2.0). In other words, the SRA now
distinguishes between suspend of the application via a navigation away,
with the likelihood that the application will be resumed, and
termination of the application via a browser close. Comparing to SISP
1.1, the SISP 2.0 therefore provides finer granularity, so the content
server then can decide whether to perform a 'suspend' of the application(where the data are kept ready for resume later) or release the session.In addition, when re-launching the same application (for example by
clicking on the same navigation node twice), the portal SRA will
recognize this case for a SISP 2.0 object and omit the USR_SUSPEND
notification for performance reasons (otherwise the content server wouldhave to terminate the existing session and create the new one a few
milliseconds later).
Regards
Priyanka
SAP Active Global Support
Very clear answer I would say... so we are going to use it
Cheers,
Benjamin Houttuin

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.

There are many jre exe files: what are the differences and which I choose?

Having some problems, that I will describe in another message, I was looking for the latest jre.
I saw that on www.java.com there is 6 update 1, whereas on www.sun.com there is already 6 update 2. So, I would like to know when an update is made available on www.java.com and through automatic updates?
Also, I saw different names, and I would like to understand in an exact way what are the differences:
jre-6-windows-i586.exe;
jre-6-windows-i586-iftw.exe;
jre-6u1-windows-i586-p-s.exe;
jre-6u1-windows-i586-p-iftw.exe;
jre-6u2-windows-i586-p.exe;
jre-6u2-windows-i586-p-iftw.exe;
I understand that te iftw part means the it is a small download, only the setup module. But why there are some files that end with "-p", some with "-p-s", sm with "-i586"?
Thank You
Rodolfo Giovanninetti

The question mark icon on the dlls indicates that LabVIEW is unsure of
the location of the DLL, or is unable to locate the DLL on your
system. This can happen if the DLLs do not exist, or if the "Call
Library Function Node" just specifies the name of the dll, and not the
entire path to the dll. IVI and Instrument driver VIs will
typically not supply the entire path to the DLL, whch would cause the
question mark icon to appear.
If your application is working properly, then you should ignore the
question mark in the dependencies list. If your application is
broken because the DLLs cannot be found, they are installed with the
following drivers:
ivi.dll is installed with the IVI compliance package, which is available at the following link:
Drivers and Updates: IVI Compliance Package
You should also install the latest version of NI-VISA, which is required by the IVI Compliance Package:
Drivers and Updates: NI-VISA
ag3325b_32.dll is installed with the your instrument's IVI driver, which can be found below:
Agilent 3325b Instrument Driver
Jason S.
Applications Engineer
National Instruments

What are the frameworks available out there

I just want to know what are the frameworks available out there for Desktop application ?

I want to create a standalone application in Java and I heard that I can make it easier if I follow a framework.
After having a look at frameworks for Java, it just completely confuse me, as it is very different from frameworks for Flash (which I do most).
The java framework covers much more stuff than what Flash framework covers (which mainly regulate the way how the SWF communicate with the server and the design of the classes )
I still wonder what is the definition of framework in Java ? Do I really need one for a standalone application, or I just need to follow the MVC design for my classes ?
I just need to get it right before I actually work on my program.
Thanks.

I have had Itunes installed on my laptop for many years. I t started malfunctioning so I uninstalled it. I tried to reinstall and there is persistent error in installing . What is the problem ? How can I solve this?

"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you.

I would like to put the results of a proc on a local database into a table in my azure db. What is the best way to do this?

I would like to put the results of a proc on a local database into a table in my azure db. What is the best way to do this? I dont see the ability to link. The local db is on my desktop and is mssql12.
McC

I am not sure if i set up the linked server correctly here is the schema and an attempt to run a select and the resulting error:
SELECT *
FROM [CN5E6E9LM2.DATABASE.WINDOWS.NET,1433].[Mkerr_db].dbo.addr
OLE DB provider "SQLNCLI11" for linked server "CN5E6E9LM2.DATABASE.WINDOWS.NET,1433" returned message "Unspecified error".
Msg 40515, Level 16, State 2, Line 1
Reference to database and/or server name in 'Mkerr_db.sys.sp_tables_info_90_rowset_64' is not supported in this version of SQL Server.
McC

Is there any commercial support for LCCS services? What are the associated SLAs

Hi,
Following are some queries regarding LCCS.
Is there any commercial support for LCCS services? What are the associated SLAs of the support and the cost?
Can I Using applications developed using LCCS for commercial purpose?
Does Adobe allows its LCCS service customers to offer applications developed using LCCS API for 3rd party commercial usage.
Thanks & Regards
Amit

Hi,
We were selling LCCS to enterprise customer under a different licensing program, but have since stopped the sale of that.
You should check out this thread - http://forums.adobe.com/message/4110049#4110049 for a discussion on this.
Jeff

I have Lightroom 5, how do I upgrade to Lightroom 6? Is there a price for upgrade or do I have to buy the whole package of Lightroom 6? What are the links ?

I have Lightroom 5, how do I upgrade to Lightroom 6? Is there a price for upgrade or do I have to buy the whole package of Lightroom 6? What are the links ?

jimh40613356 wrote:
I have exactly the same question. When I use the link provided, the price for LR6 is $149. I've spent over an hour trying different links and researching on forums. This may be because I currently have a "Creative Cloud" subscription (which I plan to cancel). Please advise as to how to access upgrade pricing.
<rant>This is insane. I'm a long time customer and have licensed multiple Adobe products. All I want to do is upgrade a product I've used for years. Why Adobe seems to go out of its way to make it difficult to buy its products is totally baffling.</rant>
Thanks for your help
If you click buy, it takes you to a sub munu, where you can select either "Full or Upgrade". Select Upgrade, then select the version you already have. The upgrade price will then be displayed.

Is there any way I can know what are the list of patches installed on Indesign Server CS5

Hi All,
Is there any way I can know what are the list of patches installed on Indesign Server CS5?
Please let me know if the there is any command to do so.
Thanks,
Manjunath

Is this link any help?
http://www.btvision.bt.com/on-demand/?cat=filmclub
It seems to give the film club info.
If you sort the list by "ending" date, shoul should be able to find recently added ones.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

You are allowed to have two activated installations, so if you prefer to you can keep ut on the current machine and just install it on the new one like you did originally. If you wish to eliminate it on the other machine, the first thing to do is to deactivate it by opening a program in the suite and selecting Help -> Deactivate in the top toolbar. That is all you need to do to disable the software. At this point if you prefer to you can uninstall it if you like.
As far as getting it on the new nmachine, as I just indicated, just install it like you did the first time.

What are the avilable learning meterials for the Exam 71-532 Developing Microsoft Azure Solutions (beta)

I need to know what are the available course materials for the following MCP exam.Thanks
Developing Microsoft Azure Solutions (beta)
Dileepa S. Rajapaksa
Trainee Developer
Microsoft, Sri Lanka
Twitter : @dsrajapaksa
Blog : http://www.dileepatech.net

hi,
here just one MOC course listed:
https://www.microsoft.com/learning/en-us/exam-70-532.aspx
MOC 20532:
https://www.microsoft.com/learning/en-us/Course.aspx?ID=20532A
regards
Thomas

Is there a limit to Azure Baidu push? What are the tech specs around delivery?

Similar Messages

Maybe you are looking for