Is there a limit to number of SNASW links?

We have an IBM 3745 with T/R which we disconected and attached a router with SNASW instead. Same macaddress as the 3745. It went fine first but when a lot of people started to logon they hit the wall and the SNASW stopped to respond to new connections. We do not use Virtual T/R, just a plain physicall interface with a SNASW port statement connecting the thing. Is there a limit somewhere?
Regards
Bjorn

Hi Bjorn,
You can issue show snasw link and specify the port name to see just the links using that port (don't be fooled by the Total links count ... that is the total for all links on all ports).
Bob has told you how to spot the situation where you are hitting the max-links limit.
However, based on your previous updates I suspect you have a different problem. Are you still seeing 08060000 in the pdlog? If so, that means there is a problem with the switched major node as Tran pointed out.
You mentioned earlier that the customer is getting frustrated. If that is so then I suggest you open a TAC case and collect the traces that have been recommended. With the correct documentation in hand this should be a very quick resolution.
- Ray

Similar Messages

Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

Is there a Limit on number of authorization objects in a role?

Hi all,
Is there a Limit on number of authorization objects in a role because I am getting the following error.
Authorization is full. Please enter fewer values
Message no. 01262
Diagnosis
You have included too many values in an authorization.
Procedure
Please distribute the data to at least two authorizations and combine them in a profile.
Thanks.

Hello Neha,
Message no. 01262 refers to the entered values in an authorization, not to the objects listed in the profile!
So this message tells you, that you have to split the authorization, as the authorization contains too many values. It is not a quesiton of that you have entered too many different objects to the profile!
Please refer also to:
[SAP Note 410993|https://service.sap.com/sap/support/notes/410993]
and
[SAP Note 943796|https://service.sap.com/sap/support/notes/943796]
b.rgds, Bernhard

Is there a limit on number of SANs in Lync certificate

Hi,
We are in the process of deploying Lync 2013 for a very large client. They have multiple companies and multiple sister companies. We are planning to use a single cert for the whole deployment. Net / Net 120 - 130 domains.
My question is, is there any limit on number of domains in SAN of the certifiate. Has anyone used SSL.com for UC certificate.
Regards,
Lisa

Have you looked at Joachim Dissing's blog about handling many sip domains? http://exchangepro.dk/2014/01/13/how-to-handle-many-sip-domains/ You might want to also check
out the Lync 2013 Hosting Pack: http://www.microsoft.com/en-ca/download/details.aspx?id=39101
As for Third Party CAs I believe the limits are:
DigiCert: 25 domain names
GeoTrust: 25 domain names
Thawte: 25 domain names
Symantec: 25 domain names
GlobalSign: 100 domain names
GoDaddy: 100 domain names
Entrust: 100+ domain names
Comodo: 210 domain names
SSL.com: 2000 domain names
Keep in mind you should choose a provider that is an approved UCC provider: http://support.microsoft.com/kb/929395/en-us
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Is there any limit on Number of items that can be created in SBO2005B

Is there any limit on Number of items that can be created in SAP Business One 2005B.
We are working for button manufacturer.
Each button will have type,color, size, thickness.
There are about 100 types, 40 colors, 30 sizes, 10 thickness, 500 models.
It looks to be approximately above 30lacs item codes has to be created.
Is there any performance issues or any other known issues towards the large item lists.

Hi,
There is no real limit on the number of items you can create (well, the item code is a 20 character key so theoretically the limit is the total number of possible combinations of letters and characters in that key).
Performance can be an issue with a large inventory, as well as database size (particularly if you have a large inventory and a large number of warehouses). Some issues such as the speed of lookups can be avoided by changing system settings but other issues such as the speed of inventory reports are inevitable going to take longer for larger inventories.
Have you done any research on looking for SBO addons for the clothing industry? It might be worth searching the CPSN for such addons (ie ones that can deal with sizes, colours etc) as these may help greatly in keeping the number of stock items down to a minimum.
Kind Regards,
Owen

Is there a limit of number of questions in this forum?

Because I posted some questions which were removed..

Is there a limit of number of questions in this forum? No, but forum etiquette strongly suggests you keep a thread on any individual topic continuous (that means together no matter how long that thread might become). So, you should NOT post separate individual questions for every tiny nuance you might have.
The inherent nature of a forum is that thread topics get spread far apart as time goes by. If your inquiry is splattered into individual new posts, they WILL get scattered and your topic will no longer make any sense.
Anyone you hope to respond to you will lose all focus on the topic and will just no longer try to give you answers.

Translation Manager: Is there a limit of number of languages per Universe?

Dear All,
can I translate Universe content to up to 20-25 languages with Translation Manager for each Universe?
Is there a limit?
Kind regards, Martina

Is there a limit of number of questions in this forum? No, but forum etiquette strongly suggests you keep a thread on any individual topic continuous (that means together no matter how long that thread might become). So, you should NOT post separate individual questions for every tiny nuance you might have.
The inherent nature of a forum is that thread topics get spread far apart as time goes by. If your inquiry is splattered into individual new posts, they WILL get scattered and your topic will no longer make any sense.
Anyone you hope to respond to you will lose all focus on the topic and will just no longer try to give you answers.

Is there a limit to number of devices you can simultaneously sync to one itunes account?

Is there a limit (set by itunes or elsewhere) to the number of devices you can simultaneously sync to one itunes account/PC/Mac? Using USB hubs or other sync/charge devices?

iTunes can only sync one device at a time.
There is no limit to the number of devices you can sync consecutively with the same library.
Each device can hold protected content from up to five accounts.
Up to 10 computers and iOS devices can be authorised for automatic downloads of an Apple IDs available purchases (some items may only be downloaded once).
Up to five computers can be authorised to each Apple ID at any one time.
tt2

Is there any limit on number of firefox profiles that can be created?

Is there any limit in the number of firefox profiles that can be created?
My issue is
I am currently doing selenium webdriver automation in linux for a device. There are 50 devices of same kind and framework will pickup a device depending on availability. I need to by pass unsigned ssl pages. I am using firefox 14.
I have implemented following but it is not consistent.
everytime a device is chosen
adds cer of device to the cert file in firefox profile
but I am getting sec_error_bad_signature very frequently.
So I started recreating cert [delete and create if by opening firefox] file for every run.
Now this is posing a problem if multiple devices are run at the same time. Hence I want to create separate firefox profile

Not that I have ever found. And at one time I had over 60 Profiles, but after I hit 20 Profiles listed in the profiles.ini file the launch time for Firefox became noticeably longer on WinXP. With remote Profiles, not listed in the profiles.ini file and launched strictly from command line there was no impact on launch time.
How or if that relates to Mac OSX is beyond my knowledge, never owned used a Mac.

Is there a limit to number of recipients for an email?

I need to send the same email to about 250 people.
Is there a limit to the number of recipients Mail can handle in the BCC field?
At the moment I can get all the address's from a spreadsheet as Comma separated text.
Will this pasted into the BCC field work?
Lion 10.7.2 Mail 5.1
Thanks in advance
D

You will need to check with your ISP; they may have limitations - mine does in order to cut down on spamming.
Once you find out if/what that limit is, you can simply type and email once, copy the content, enter the addresses, and send out 5 - 10 - or whatever number of emails successively until you've sent it to all 250 people.
I would create a group or at least have all the names/addresses in the Addressbook; that way, you can start typing the first name and Mail will automatically add the email address for that name. And yes, it is good to use BCC for that - send it to yourself and BCC everyone else.

Is there a limit to number of images in Lightroom4 web gallery?

What is the total number of images that can be in a LR4 Web HTML Gallery? Is there a limit? I am using Mac OS LION.

I thought at sometime there was, I did a two day corporate event with around 1,000 attendees. Client wanted published on their internal web site and over the two days there was well over 1,000 images
With my perceived LR 3.4 limit (and I could be wrong about the limit) and the fact I only had a few hours to deliver I used a freebie software package XnView which worked out just fine in creating a web view. Never got around to testing with LR

Is there a limit to Number of Tracks in DVDSP

I have a client who want to put package 80 seperate interviews.
Is there a limit to the number of video tracks that DVDSP can handle?
Help appreciated

Yup... you can have up to 99 tracks, including stories and slideshows in that number.
However, there is really no reason to have one clip per track... you could put several (or all 80) into a single track if needs be.

Is there a limit on number of Purchased TV episodes?

I'm trying out the feature recently added to AppleTV in which it will let me watch TV episodes from the 'cloud' (i.e. episodes of various shows that I have previously bought). Is there a limit on how many episodes of a given series it will show?
The reason I ask is that one of the shows that I have bought is 'Disorderly Conduct: Video on Patrol'. I have both seasons, each of which has 26 episodes. Using the 'Purchased' function allows me to see all 26 episodes of the first season, but only 1 episode of the second season. Why does it do this? I bought all episodes of BOTH seasons (in each case I used a 'season pass').

Addendum:
When I bought season 1 of Disorderly Conduct, I bought it as a 'Buy All Episodes' link within the iTunes Store - the season was already over, so there was no Season Pass as such. I bought Season 2 as a pass, though.
There was one Season 2 episode that I had to buy again, though. The first version that appeared on the Store was incomplete, so I had to buy it again, as a one-off purchase. And it is THIS episode that is the only Season 2 episode which appears in the list of Purchased episodes in the AppleTV.
Why would this be a problem? And what can I do about it?
I would like to be able to delete all S2 episodes from my iPad and computer - I don't usually watch TV episodes from anywhere other than the AppleTV - to save space. But I can't do that until I fix this problem.

Desktop pictures: is there a limit to number of pictures

Hi there
I have a folder full of pictures (ie 6 thousand) that rotate through the desktop.
Is there a limit to how many pictures I can have in the source folder and still have the display & computer functioning all right?
Also, does changing the pic every 5 seconds have a negative impact on the Mac?
thanks in advance
denis

That is not the best idea in the world to be using a folder with that many images.
It requires a lot of memory usage to change the desktop pictures every 5 seconds, especially when it has to cycle through thousands of images.

Is there a limit to number of photos?

I am working on a page of bird photos. After adding 9 images the next ones are all below the blue line. I can not make it bigger (the area defined by the blue box). Also, the individual images above the blue line when clicked on have a blue box around them. The images below only show the box with handles formed by the gray lines with the squares. No room for text etc. Is there a limit to how many photos fit on a page? I have like hundreds.
Dual 800 G4, iMac G4 Mac OS X (10.4.1)

If you post the URL we can take a look at it and maybe come up with a solution for you. In the meantime, create another photo page in iWeb and drag the photos you want into the blue box area of the canvas.

Is there a limit to number of SNASW links?

Similar Messages

Maybe you are looking for