Is there a limit to the number of photos added to iMovie?

I am trying to add more photo stills to a project but iMovie will not add more than the 495 I have in there. I know it is an enormous amount of still photos but in they are short in duration and I'd like to add about 130 more to complete this project. Any photos past this mark are simply being rejected/not added by the program no matter how many times I try to drag them over even one at a time. Is there a limit? Can I overcome this some how?

I would recommend that you put the photos that you need in order in an iPhoto album.
326 should be no problem. I have done that many or more.
To drag them into iMovie, open the Photo Browser in iMovie and look for the album. There should be an icon for the album. Drag the icon for the album into your iMovie Project. (rather than dragging the photos one at a time).
Since you are having sluggish behavior, I would recommend that you shut down iMovie, restart your Mac, and start over with a new project, unless you have too much work invested, in which case, try the old project first.
Here is a sample of a project where I dragged about 300 photos into a project from an iPhoto album.

Similar Messages

Why can I no longer add photos my iPhoto book? Is there a limit to the number of photos? Must I delete unused photos??

Why can I no longer add photos my iPhoto book? Is there a limit to the number of photos? Must I delete unused photos?

This is book # 13 and I've not encountered this problem before. I am dragging photos into the sourse pane but they are not imported. I have other books w/ over 700 pics (not all used) but this has only 300+ so far. I've copied the book to a pdf and it looks as if I'll have to redo it unless there's another solution.

Is there a limit to the number of photos I can include in a PSE 12 slide show?

I recently took a trip to Ireland and...being the camera addict that I am ...took right at 3000 pictures.
Obviously -- I don't want to include all of them, but I do have several hundred that I would like to put into a slide show.   Is there a limit to the number of photos I can use?
Also, I notice that there's an option for adding a narration.    I'm new to "12",   so .... how do I go about this?
Hope you can point me in the right direction.
Thanks so much,
MarDee

I just discovered that I have the trial version of Adobe Premier.   I've
been playing around with it a little bit and NOW I wonder if it might not
be the perfect program for me to use to create my Ireland travelogue.   I'm
about to the point of thinking that the investment in the program &
upgrading to the "real" thing will be worth the money.
NOW...should I do this, is it going to be better to leave the photos in
their current size (just a step below RAW)   or resize them down to the
size used in email?    That being said --- what is going to be best for
putting on a DVD to share with friends & family.   Looks like AT LEAST 1000
photos.
On Tue, Jun 10, 2014 at 10:04 AM, MarDee McDougal <[email protected]>

Is there a limit to the number of Photos one can use in the Screen Saver?

As the title inquires... I recently help set-up a friend's screen saver to use their entire iPhoto library as content. The library has about 2,800 pictures. When the screen saver engaged, the 'Looking for pictures...' dialogue came up, and 10 minutes later it is still there. I am hoping that it is just indexing these photos, and once complete the screen saver will kick in, and future activations of the screen saver will kick in more quickly.
If not, what is the limit? And, if you are from Apple and are reading this, why did you not include this information in an easy to access location, so that going through all of this would not be necessary.

There is no limit as to the amount of pictures the screensaver can use. However the more pictures there is a slightly longer loading time. HOWEVER still, it should not take 10 minutes for 2800 pics. It shouldn't even take a minute.
It would be a little helpful as to what computer your running and what OS, but here is a good suggestion.
The first thing you want to do is to make sure you have the most recent updates for the OS and iPhoto. (Use the software updater)
Next you should repair disk permissions. Go into apps, into utilities, open disk utility, click your hard-drive on the left, and click repair disk permissions. When thats finished (10-30 minutes depending) restart the computer. For reasons that I'm not quite sure, disk permissions fixes many problems and glitches you may encounter.
Try setting you screensaver again.
~Valen

HT201317 Is there a limit to the number of photos I can upload?

I tried photo stream and it always stops around 235 photos loaded, about 900Mb. I have a free iCloud account of 5Gb and it's only showing 2.8 Gb used and doesn't show anything about photostream at all. Just backup. Is therea space limitation?

I just discovered that I have the trial version of Adobe Premier.   I've
been playing around with it a little bit and NOW I wonder if it might not
be the perfect program for me to use to create my Ireland travelogue.   I'm
about to the point of thinking that the investment in the program &
upgrading to the "real" thing will be worth the money.
NOW...should I do this, is it going to be better to leave the photos in
their current size (just a step below RAW)   or resize them down to the
size used in email?    That being said --- what is going to be best for
putting on a DVD to share with friends & family.   Looks like AT LEAST 1000
photos.
On Tue, Jun 10, 2014 at 10:04 AM, MarDee McDougal <[email protected]>

Is there a limit to the number of images in a slide show?

I am making a slide show for an event and would like to use lots of pictures, is there a limit in the number of images in a folder? the number of images in a slide show?

is there a limit in the number of images in a folder? the number of images in a slide show?
None that I know off. But why are you asking? Did you notice any performance problems or problems to render the slideshow? Then it would help to know more about your hardware RAM, disk, CPU ..
If you already encountered problems, you may wish to have a look at this thread - although it relates to Aperture 3, not 2:
Is there a limit on the number of photos you can use in an Aperture slideshow?
And as I said in that thread:
I'd expect the limiting factor to the length of a slide show to be the patience and "Good Will" of your intended audience
Regards
Léonie

Limit on the number of photos?

Is there a limit on the number of photos the ATV2 can show from our iPhoto library? I have over 32,000 photos in my library and when I try to see them, only 19,998 show up. I'm missing my last 4 years of photos (19,998 doesn't seem like a coincidence to me).
I can see all albums and events (when I'm using those menus) but they are not in reverse chronological order so the most recent albums and events are at the end of the looooong list (I have more than 750 events in my iPhoto library). This is not practical at all.
And of course, it's taking a looooong time just for the events and albums to show up on the screen. My network is all Apple 802.11n stuff so it should not be the bottleneck. Any ideas?

The limit is based on the 8GB internal storage on the ATV2. I confirmed this with Express Lane support today. ATV2 will try to load your entire library but will stop when it gets to the limit and does not provide any messages stating that the limit has been reached. This means that you will get roughly the first 20,000 of your library, starting with the most recent.
The work around is to select which albums or folders from iPhoto that are to be synced, much like you would do for an iPod or iPhone that can't fit your whole music or photo library. This selection process is done in iPhoto's Sharing preferences where you select Share my photos and choose the second option to Share selected albums. Note that the list will contain iPhoto folders as well as albums.
Once you reach the 8GB limit, you may also have a problem playing the video files in your iPhoto library that appear to have been synced, as the full videos are not loaded until they are selected for playing. Once that is tried, ATV2 will likely crash as the 8GB limit is exceeded. No harm is done to your library that is safe.
This whole process is not well supervised by the ATV2 system as it keeps the user in the dark.

Is there a limit to the number of email addresses in one message?

Hello
Is there a limit to the number of email addresses in one message with Mac Mail?
I am trying to send out to c900 email addys and am being told my server does not recognise the email addresses. I will check with the folks hosting the email also.
Many thanks
Matthew Causon

Ooh, yes, 900 emails at once will absolutely not work (unless you get very very lucky).
If this is just a one-off, you should group the addresses into, at the very most, 50 addresses, and send batches. If you're doing this a lot, I would recommend using something like DirectMail.
Matt

Is there a limit to the number of addresses can I put into a group of multiple users in my address book?

I have just started using Thunderbird and want to set up a number of list groups in my Address Book so that I can simply click on the list name and the email goes to multiple people.
Is there a limit to the number of addresses that I can put into each group? Or, can I put as many addresses into each group as I want to? Thanks for your answer.

Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

In my Mail program (4.6), OS10.6.8, can I send bulk email bcc? If so is there a limit to the number of names/addresses that I can send?

To add the BCC field to the message window, create a new message, click the 'three lines' button near the to and from fields & select the 'BCC Address field' or choose the 'customise' option. This button may be a 'gear' on the older OS (I don't recall for 10.6.8 Mail).
The BCC field is more likely to be limited by the email server than Mail app. If you add hundreds of addresses (or use large groups with many addresses) the email server may assume you are sending spam. Sometimes it causes the server to drop the message or bounce them, different providers also have different rules, so you need to use bcc & ccc with care.
If you plan on doing mass mailing you would be better with a service that handles it correctly for you (i.e. sends multiple messages without using ccc or bcc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

Is there a limit on the number of Key Lookups against a table in a mapping

I'm using OWB 11.1 and have a mapping with 15 Key Lookups against the one table. When I Validate the mapping it objects to a Key Lookup not being connected, even thuogh in the mapping all the Key Lookups have been renamed to their relevant fields?
Is there a limit to the number of key lookups against the one table?

Thanks for the replys.
I'm getting a validation error, so can't run the mapping. Error VLD-1108: Operator Key_LOOKUP is not properly connected.
The issue is solved, after checking each of the Key_Lookups, one was not connected to an output. The error occurs if an output field isn't used (connected to) a table or other operator.
Edited by: user616385 on Sep 30, 2009 7:58 PM
Edited by: user616385 on Sep 30, 2009 8:01 PM

HT204053 Is there a limit to the number of devices I can have on one account. I have all two of my kids ipods, plus, mine, an ipad, and my iphone, and need to add one more. I do this so that I have control over and can see what they are downloading.

Is there a limit to the number of devices I can have on one account. I have been putting my kids' ipods on my account so that I can manage their downloads, and control it. Then I just create playlists for them specifically. Now, adding another one for my youngest, but have no idea if there are limits.

Well the part about putting songs in the "iTUnes Music" folder I only brought up because it seemed you liked things very organized. You could use iTunes to so all the organizeing. Plus once you add something to the iTUnes library, if you change ANYTHING about it in windows explorer, like its name, change the name of the folder its in or move it to another folder, iTUnes "Looses Track" of it. Its not like other programs that "Watch" files and folders for changes outside its "iTUnes Music" folder
But to have iTUnes auto search, you have to delete a hidden pref file. After doing this, when you open iTUnes again it will throw up a setup wizard, just like its the first time ever installing it. Its in this wizard where you get your ONLY chance to have iTUnes auto search and add files from the system. Just goto the link below and follow Scott P's steps
http://discussions.apple.com/message.jspa?messageID=607357
Also since your new to the ipod, you my want to check out the "iPod 101" section so you can learn the ropes of everything
http://www.apple.com/support/ipod101/

Is there a limit to the number of Apps you can download to your iPod touch?

I just downloaded a batch of new free apps the the App store to my Mac and then synced my iPod and it showed in the progress bar that it was transferring the new Apps to my iPod but when I checked it most on the new Apps weren't on there. Is there a limit to the number of pages you get on the iPod to add new Apps? I actually have 9 pages full now and if the other apps I downloaded are on the iPod where would I find them?
They are a nightmare to reorganise into groups on the same pages.
Thanks
Kevin

9 pages of apps is a LOT, though I have to admit, I'm about halfway there.
It doesn't affect how many are SOLD/downloaded... it only affects how many can be used at ONE TIME.
But you see, will you actually be using ALL 9 pages worth of apps at the same time? Not likely. And as time goes by, you'll find some apps aren't as useful as you thought. While others prove too useful and end up replacing a few others.
For example, there are dedicated Facebook, LiveJournal, MySpace, etc apps. But if you don't do anything specific, and only blog, you could use one of the third party apps that allows you to blog to most, if not all of them from the same app.
Do you need a separate app for football, then basketball and baseball, if all you do is see who won? Again, there are other apps that'll give scores for more than one sport... and even include various stats (RBIs, TDs, etc).
Of the 80+ apps I've downloaded, I've flat out deleted from my computer a handful (cause they stink). And I've "put in reserve" a few others (sort of useful).
Yes, I agree, there needs to be an easier way to organize them.

Is there a limit to the number of video files that can be included in a captivate 6 project?

I have a project that includes 15 slide video files. When I preview the project in html or publish it, I get a green rectangle where the video should be on about the 10th slide. Even if I rearrange the order of the slides, always on about the 10th one I get a green rectangle where the video should be. Is there a limit to the number of slide videos you can have in a project?

Craig,
It was image.cpp line 2770. I am told (by another person in the company that has seen this) that it has been seen on several machines, always PXI controllers, but not on all PXI controllers. I am told that it is not always image.cpp that reports the error, but for me it was always the same line of code identified by the error message. I did not have a chance to do any experimenting to find a particular threshold number of mnu files. I may be able to find error logs. I currently sent the controller to our IT department, doing a windows XP repair, just in case there was something corrupted in the system itself.
The error was reproducible. This installation at one time must have included real-time / FPGA, because on the opening screen I ge the drop-down ring for selecting a target. If I click on this drop down ring, I get the crash on line 2770, every time. If, instead I open an empty new VI, I am able to switch to the block diagram by selecting the window directly with the mouse, but if I try to pull down on the "window" menu to do "show block diagram", I get the crash on line 2770, every time. Because the user-defined mnu files are now deleted, I would have to create them again, or find a way to reinstall them, to reproduce the error at this point.
Vinny

Is there a limit to the number of photos added to iMovie?

Similar Messages

Maybe you are looking for