Is there a liquid tag for related products?

There does not seem to be liquid tag for related products. I'm now using {tag_relatedproducts}.
I would like to use {{relatedproducts}} because I would like to use useli="true" to get rid of the default table.
Am I missing something or is there no liquid tag for related products? It would be helpful to have one.
If it's not there, is there a different way to use a list instead of a table for related products?
Thanks.

The BC team is (rightly) getting away from the tags and parameters that involve HTML code rather than just the raw data.  I would be surprised if this is not one of those on the chopping block.  There would be a need to expose related products in the API though so you can compose a FOR statement and build your own collection but I'm not sure if that is supported or not yet.  Try using module_data with the appropriate resource/subresource and the {{this | JSON}} tag to check.

Similar Messages

  • When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.

    When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.
    Can I syncronize my iPod without loosing all its data?. How about syncronizing it to my iPhone?

    Have you tried the steps listed here?
    http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing. html

  • Is there any tech support for Neo4 products?

        One of the reasons I'm watching this forum is to see what kinds of problems I might end up with my Neo4 Platinum since I found out that MSI support of their products kinda sucks (not to say any other any other OEM is any better) This system I just built started out with a MSI X800 Pro PCIe (thought I wouldn't have any compatability problems since both were MSI products) that ended up being sent back because of a bad GPU. It did install ok but had garbage on the boot screen and wouldn't run any 3d programs. I tried to update the Bios on it and liveupdate wouldn't recognize it for bios update or driver updates. When I called tech support on it I was informed that none of the MSI X800 Pro PCIe cards are recognized as MSI products. I also asked why liveupdate does not show any driver updates for the motherboard drivers (I also have a KT6V that shows all the MB driver updates even when they have been updated) and I was informed that none of the new motherboards will show driver updates if they are current on the board. Problem is that my realtek drivers are updated and they still show up on liveupdate.
         I also have a hard time buying the statements made on this board that the forums are not part of MSI support. The Forums are not shown as an outside link but are listed under Service for MSI products and if you go to the Sevice page under the discription for the Forums it states that "You can also post a message there to get help." and yes I did read the forum rules where it states that "There is no MSI support to be found here. The moderators are not paid by MSI and do not work for MSI, we are users just like you." If everyone posting on these forums are just users helping each other, then wouldn't it be better just to state that the boards with SB are not compliant with the 24 pin connectors and that you need a PSU that is backward compatible to 20 pin specs?
         This "rant" of mine is not meant to be a bashing of MSI products since I haven't found many other OEMs that are any better in their support but is intended to help present and future users of MSI products and since I hope I'm using this forum as is intended by the "rules" can anyone who has a K8N Neo4 Platinum let me know if they are having a problem or know of a problem with the AMD 3500+ (winchester) voltage never reaching 1.4 volts on this mb? If the manuals for the mb and my psu are correct I have a dedicated 12 volt rail for the cpu with 15A. The cpu voltage stays around 1.37 on CoreCenter and 3 other programs that monitor cpu voltage even when running Prime95 with 100% cpu usage.

    The default for CPU Voltage is By CPU VID default for Adjust CPU VID is Startup which should be 1.4 volt. Since Cool'n'Quiet requires a driver to run and I also show low CPU VID in cmos it should be 1.4v but I tried with Cool'n'Quiet disabled and also tried setting CPU VID to 1.4 but have never made it to 1.4 I also tried setting it to 1.425 which is the next step and still read under 1.4.

  • Is there any customer support for this product?

    I have a client who has sent me two documents. When I log on using my Adobe ID it says
    the Document could not be found because of one of the following reasons:
    * Document was rejected by one of signatories
    * Document was cancelled by initiator
    * Document was deleted by initiator
    * Document has expired
    My Adobe ID is not the same as the email I use everyday and I don't see a place to add additional emails. Now I have three Adobe IDs
    How do I contact Customer service or tech support for this product?

    Yes, this is exactly what I'm wondering too. Without it, we can't build any apps that download content without the risk of the content being deleted.
    Here's the background before Apple introduced the new "do not back up" attribute:
    http://www.marco.org/2011/10/13/ios5-caches-cleaning
    Fortunately, Apple addressed it after that blog post in 5.0.1. See bullet #4 here, quoted below
    https://developer.apple.com/icloud/documentation/data-storage/
    Q:  My app has a number of files that need to be stored on the device permanently for my app to function properly offline. However, those files do not contain user data and don't need to be backed up. How should I store those files in iOS 5?
    A: Starting in iOS 5.0.1 a new "do not back up" file attribute has been introduced allowing developers to clearly specify which files should be backed up, which files are local caches only and subject to purge, and which files should not be backed up but should also not be purged. In addition, setting this attribute on a folder will prevent the folder and all of its contents from being backed up.
    Important: The new "do not back up" attribute will only be used by iOS 5.0.1 or later. On iOS 5.0 and earlier, applications will need to store their data in <Application_Home>/Library/Caches to avoid having it backed up. Since this attribute is ignored on older systems, you will need to insure your app complies with the iOS Data Storage Guidelines on all versions of iOS that your application supports.
    Now we just need Adobe to support the attribute in the AIR SDK. What do you say Adobe?

  • Mucow. Is there a parameter tag for choosing files to upload

    Got a html slideshow and making it into a Muse widget but is there a parameter to use to be able to choose and upload files? e.g. the picture to add to the slide show? Thanks

    Can you try using the Send feature to do the file uploading and let us know if that works? You can use the Create Anonymous Link option, then click Create Link. This will upload your file to your Acrobat.com organizer. After uploading, you can turn off the sharing on the file if you want.

  • Why isn't  there a theme selection for apple products they should atleast give us the choice to choose what look we want on our phones come on every other phone brand has it why not apple ?!!

    When will there be an update to give Iphone users the options to change there themes/skins and text design ?!! Every other smartphone brand had the feature why not iPhones ? Maybe this is why people are complaining  that iPhones look boring !

    send your feedback to apple here http://www.apple.com/feedback/
    Leroyfromgb wrote:
    When will there be an update to give Iphone users the options to change there themes/skins and text design ?!! Every other smartphone brand had the feature why not iPhones ? Maybe this is why people are complaining  that iPhones look boring !
    What people?  I have no issue with IOS 7, neither do the 30 plus people at my work, who I suggested to update to ios 7.0.4, and these are people from the ages of 20+ to 60+....

  • Techniques for New Product Introduction in Demantra 7.3.0.1

    Hi,
    In Demantra 7.3.0.1 there are two ways for New Product Introduction:-
    1) Demand Planner: Member & chaining management
    2) Collaborative Workbench: Create Similar product
    Can someone please tell me the pros and cons of each technique.
    The new product introduction will be handled by our clients, so I wanted to know if all the required features can be handled by just one method so we can propose that to be used by the client. Or do we need to use both techniques for different scenarios?
    As I understand with Chaining one can link one item to many sites at one go, while with CW the similar item is created linked to one particular location.
    Also CW allows for adding cannibalization factor which is not accounted for in chaining.
    Apart from this it would be really helpful if someone could throw some more light on the issue.
    Thanks.

    Hi Gaurav,
    I personally feel that 'Create Similar product' is a much required improvement over the original way of NPI using Member & Chaining Management.
    Also with CW as well, a new and similar item created can also be linked to multiple location, same as Source Item, depending on the filters used in the Worksheet from which the create similar product is invoked.
    some of the PROS and CONS of the 2 methods are as follows:
    Demand Planner: Member & chaining management
    Pros: 1) Can be used to specify the time range for copying the history date.
    2) Can be used to specify the Percentage by which the source data needs to be adjusted while copying into the target combination
    3) An important feature is that this can be used to do chaining at an aggregated level.
    Cons: 1) It takes a long time to setup a New Member, combination and Chaining relationship.
         2) High User involvement since user has to perform muliptle tasks and more error prone.
    Collaborative Workbench: Create Similar product
    Pros: 1) User-friendly
    2) Users needs to enter a few datapoints in single form and does not need to navigate through multiple forms/screens
    3) Ability to specify Cannibalization parameters as well as Launch dates
    4) Good performance.
    5) Ongoing Chaining
    6) When coupled with features like 'End of Lifecycle date', it provides a complete Business solution           
    Cons: 1) Can not be used for only performing Chaining.
    2) While it can be used to create a New Similar Product, it cannot be used to create a new similar Customer based on an existing item-location combination data. This,though, may not be a very common scenario.
    3) Apart from copying other Item attributes, the method also copies the same 'Item Description' level from source to the new similar product, which sometimes can be very confusing.
    Hope this helps.
    Thanks,
    Rohit Goyal

  • There are no notifications for your produce

    Hi
    I have now  Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
    Do you guys have this experience and solution?
    Thanks a lot

    Tullip wrote:
    Hi
    I have now  Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
    Do you guys have this experience and solution?
    Thanks a lot
    Hi, your wording isn't quite clear to me.  Does everything actually work?  The "No notifications..." message is simply telling you that your stuff is up to date. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How to create a Reservation for my production order

    Hi,
    I have a production order for that I need to purchase 2 materials. but my problem is when the material come there is no reservation for my production order. someone can take it for another production order. How can I do that the system create a  reservation after the GR
    Thank

    Dear,
    When you create and release production order, the reservation is created for that order. Now you should first activate the Avelability check in production order.
    It is PP configuration
    Then you need to activate dynamic aveailability check in goods issue in MM configuration.
    Hence if the stock is reserved for your production order, then no one can issue and system will give error message.
    please come back if required.

  • PT Tag for email address

    Is there a PT tag for getting the user's email address. I have an HTML portlet that I would like to have access to the user's email and I can't find a tag for this.
    I am using AquaLogic 6.0 SP 1.
    Any help would be greatly appreciated.

    How about at the Gateway??? Can I refrence it as http;/studio/gw?m=apprun.viewPage&a=26&p=4
    instead of http;/servername;port/stuido/gw?m=apprun.viewPage&a=26&p=4
    Would the Portal Gateway know where to go???

  • Logic Pro or Soundtrack Pro for Post Production (In a Pro Tools world)?

    Hey guys,
    How many of you out there, is using Logic for Post Production (or Soundtrack Pro)? I know a couple of people myself, out there using Logic Pro for Post and absolutely love it. Wanted to see if there are more of you out there and what your experiences have been with Logic Pro in the area of TV, motion picture and video sound. How is it, working in a majority Pro Tools realm? Are you finding it harder to interface with other studios, running Pro Tools?
    Message was edited by: Syrcle

    I find that Logic is not a substitute for Pro Tools as a post editor DAW. Having been a Logic user since 96' and a ProTools user since 92' , I cannot imagine trying to post something other than music using Logic. Of course, it could be done but, it is a matter of interchange ability and the simple editing found in Pro Tools that is easy for Post applications. Conversely, I would not be tempted to make music in a Pro Tools session,unless it was an all audio scenario without virtual midi plugins.
    I love Logic for music and ProTools for post and this comes after years of messing with both in everyday real commercial environments . If you have success using Logic as a good Post audio editorial
    device,then enlighten me! But,right now, I wouldn't want to make music without Logic and I would never try to mix a movie on anything else but ProTools because these are the devices I use everyday.
    GF

  • In the Online Shop Layouts: Individual Product - Large, is there a tag for the Large Image value?

    I need a tag for the URL to the large image in order to use the Facebook Feed dialog (share).
    See example at https://aesgatorshack.worldsecuresystems.com/gator-shack/ladies/ladies-aes-pep-rally-repli ca-jersey.
    When you click the "Share on Facebook" link, it doesn't use a photo.  I can specify a photo to use; however, I need the URL to the image.
    Here's the Facebook code as is:
    <a href="#" class="social_button social_blue" onclick="window.open('https://www.facebook.com/dialog/feed?link={tag_itemurl_withhost}&amp;app_id=271818569626492&amp;redirect_uri={tag_itemurl_withhost}& amp;name={tag_name}&amp;display=popup','Sharing My AES Gator Shack Finds','width=640,height=320');">Share on Facebook</a>
    I can add the picture= parameter, but I need the URL to the image.

    There is no way to get the value of the large image tag like you can for image fields in webapps. In webapps, if you created a field called "image" then you can output the whole image markup with {tag_image} or just the URL to the image with {tag_image_value}.
    This isn't possible with the large product image.  I recently had to implement a Pin It Button on an eCommerce site on BC and had to use javascript to update the link that triggers the Pin It button with the URL of the image.  Here's what I suggest.  Instead of doing the whole code in the "onclick" attribute, you should use some jQuery and some data-* attributes and set the whole link up with that instead of inline javascript on the anchor element.
    Here's a fiddle that should work for you. It requires jQuery to be loaded before you include this script on your page and requires you to update your markup to the markup shown in my example.  Should be an easy cut and paste:
    http://jsfiddle.net/thetrickster/KQmdd/

  • Looking for a clone solution for Oracle WebCenter Content, Imaging and related products

    Hi,
    We are looking for a manual or automated cloning solution for Oracle WebCenter Content (UCM), Imaging (ICM) and related products. Oracle FMW has T2P cloning option, but we are looking for more specific to just this product to clone and configure (if needed). Any help is appreciated.
    Best Regards

    Hi
    Assuming you have set up Purchasing with accrual method on receipt (and not on period end), you could enter the PO lines with receipt required. The receipt transactions you are uploading will generate the accounting to charge the expense accounts / or inventory valuation account.
    There is no need to interface those also to Payables. In AP enter one invoice with the real monthly amount and match it to the purchase order level or to the receipts level. Approve and pay that invoice.
    Dina

  • Is there a Physical or online manual for CC products?

    So I am used to reading a physical manual to learn the different Abode applications, but now that CC is here, features are added regularly.
    My question is if I want to learn all of the features and functions, just like I was reading from a manual, where would I go to start reading?
    Not looking for a tutorial on how to do this or that, just somewhere where I can learn all the features and functions.
    Thanks in advance for your help!
    Chaz

    Hi Chaz
    You can go to this link and select the product for which you are looking for learning :
    http://helpx.adobe.com/creative-cloud.html
    After selecting the product, it would take you to specific product page where you can find feature document under help and tutorial section.
    For few products there are pdf explaining the features and for others there will be specific topic related documents.
    Thanks,
    Sanjit

  • HT4623 Is this the most up to date article on up dating the iPhone - it there anything about the problems relating to the up date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    iOS 7 devices need iTunes 11.1 or newer to sync.  Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1.  What computer and OS are you running your iTunes on?  From the iTunes download pages I see the requiorements are:
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store

Maybe you are looking for