Is there a list of the characters that are automatically converted to emoji?

Well, it says it in the title:
Is there a list of the characters that are automatically converted to emoji?
Or a way to see the characters corresponding a specific emoji?
Thanks!

Hi,
iChat,  at least to iChat 6 had this set of Smileys
They had variations of each set of keystrokes (namely whether the dash for the nose was needed)
They were controlled by a .plist that listed all of them.  (I cannot remember if it was inside the App package or in the IMAgent.app package)
However this .plist no longer exists in the current app.
Where they match the ones for posting here:-
they will have the same keystrokes.
Obviously some don't match.
8:19 pm      Saturday; February 22, 2014
  iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • 1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

    1)
    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
    i. The list of the modules that are being managed by SAP Solution Manager(s)
    ii. The performance metrics of those modules/components at the high level
    iii. The information about Early Watch Alerts (or situations to watch for)
    2)
    Is there a full SNMP interface for getting the above information from SAP Solution Manager?
    3)
    Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
    4)
    Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

    Mugunthan
    Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
    One of them is
    ===========>>>
    Uploading snapshot to central instance failed, with 3 different messages
    Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
         at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
    please assist.
    regards
    girish

  • Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

    Hello Team,
    We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
    We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
    Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
    Advance thanks for your help.
    Regards,
    Dinesh
    Thanks &amp; Regards, Dinesh

    Hi,
    As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
    get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
    Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
    Values to use.
    Resolution State 
    Severity Values for Alerts
    0       =   New
    0 = INFORMATIONAL
    255   =   Closed
    1 = WARNING
    2 = CRITICAL
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • Is there a list of Unicode characters that can be used in Acrobat bookmarks?

    I can add Greek characters to Acrobat bookmarks using hexadecimal strings. For example, to print a lower case gamma symbol I use <FEFF03B3>. FEFF is the required Unicode flag and 03B3 is the Unicode code for gamma. This works fine. However, there are no Unicode entries for greek characters in the PDF 32000-1:2008 PDF Specification manual. Table D.2 - PDFDocEncoding Character Set on page 656 lists Unicode characters and these also work when added to bookmarks but no Greek codes are in this table. Since I can sucessfully use Greek Unicode characters in the range of 0x0391 - 0x03CE and these characters are not listed in the PDF manual I am assuming there are additional Unicode character that will work in bookmarks. Therefore, I am looking for a complete list of Unicode characters that can be used in Acrobat's bookmarks. Does such a list exist?

    Thank you for the response.
    I'm sorry to hear there is no list available. I'm building the Acrobat bookmarks automatically. The input data contains entity codings (for example, a lower case Greek gamma is coded as &#x03B3;) and I was hoping to be able to just pass these through with an automatic conversion to a hexadecimal string (for example <FEFF03B3>). If I had a list of valid Unicode characters, that will display in an Acrobat bookmark, I could validate each entity before the conversion and catch the ones that won't display correctly. I know these types of characters are out there because I have already come across them. For example, a superscript 5 (0x2075) displays fine in MSWord but shows as a white box in a bookmark. Now I'll need to proof the output PDFs and look for white boxes in the bookmarks so that I can build my list of unicode characters that do not work in Acrobat bookmarks.
    Again, thanks for your help.

  • HT204385 Is there a way to see a list of the computers that are authorized on my account?

    Is there a way to see a list of all of the computers that are authorized under my iTunes account?

    No, you can only see how many computers are authorised, you can't see what they are.

  • Is there a way to edit the characters that are used when a password is generated using Safari?

    So, I really like shared keychain.  I really do.  I also like the option for Safari to generate lengthy and complex passwords.  HOWEVER, many of the websites I have tried to use the generated passwords for fail - because of the " - " character.  The dash or tack or what ever you want to call it. 
    I realize that I can just type jumbled nonsense or gobbledegook.  BUT, I would prefer to have Safari use specific characters (or at the least, exclude certain characters).  Less Fuss, Less Muss.
    I have looked in Safari Preferences, and there is not a selection to control password length or useable/excluded characters. 
    I know of third party solutions (I have 1 Password, and yes - it allows for specifing the allowable content of the passwords), but I'm trying to keep it simple and just use the Apple Tools.
    Ok..  Open for suggestions.

    No.  Create a playlist that you then sync to your iPod, and choose whatever view you wish of the playlist within iTunes.

  • Upgrading to iMac 5K or Mac Pro.  Is there a list of Graphics Cards that are optimized for Premier Pro CC?

    A couple of years ago I remember Adobe listed Graphics Cards that were optimized to work best with Rendering in Premier Pro and other applications.  I have Creative Cloud so I have access to latest versions. 
    The iMac 5K Retina has a choice of AMD Radeon R9 M290X and M295X.
    The Mac Pro has Options of AMD FirePro d300, D500 etc. 
    Does anyone have any idea where I can find out what graphic cards are optimized for Premier Pro an other applications from Adobe?
    Thanks...
    Chris Moody

    If you are not in the 4K business --> I would go for the 32 GB & 27" iMac w/o Retina, the NVIDIA GeForce GTX 780M mit 4 GB GDDR5 (CUDA support) will give you quite a good performance, i.e. with a Thunderbolt connected Raid6 system your 2K projects (including some color correction and other plugins) will work well and you can even use the system as 4k starter/test system.
    If you in the 4K business you could use a full blown iMac Retina system with a GPU AMD Radeon R9 M295X mit 4 GB GDDR5 together with an already mentioned TB Raid6 system. As described from the forum-compatriots, this non-CUDA card doesn't perform too well on GPU accelerated functions of PPro --> but --> search this forum... you will be surprised....some workflows are nearly unaffected....
    If you are in the high end 4K footage busine$$ and you apply a lot of external color correction to your 4k footage (e.g. BM DaVinci) I would go for a MPro with 2 D700 cards.

  • HT1420 how can I get a list of the computers that are currently authorized?

    I need to authorize my home computer after switching from PC to Mac. How can I get a list of which devices are currently authorized?

    There is no list.

  • My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

    My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

    Recharging is a good thing to try. They do start to act odd when the battery gets low. Beyond that, just like Tom says, contact Zagg. I have one of their keyboards and the company has wonderful customer service.

  • There no lenses listed in the profile selection area. How do I fix this I use canon gear that should

    There no lenses listed in the profile selection area. How do I fix this I use canon gear that should be there. Help!

    There are different profiles for camera Raw, and for camera JPG - and LR filters the lenses list, to show only the profiles available for the particular image you have highlighted.
    If you have selected a JPG image, you will usually see a much shorter or even an empty list of lenses - as compared with what you see if you select a Raw image. Most lens profiles with interchangeable-lens systems, are designed to correct Raw images. On the other hand, if you select an image taken with (say) a compact digital camera or supported cameraphone, any support for that will usually be in JPG.
    You can get a free Lens downloader utility from the Adobe Labs website, which gives access to the full library of lens profiles that the general Adobe user community has uploaded. Each one listed, says whether it is for Raw or not. Some of these will have been generated by end users (using another free utility) and are of variable quality. But you may get lucky, and find just what you need. Or, if it is a rarer lens or if you have particular requirements, it is not so hard to make your own profile using the Adobe utility.
    You do not need to use a profile made specifically for your camera model. The only limitation is: a crop-sensor-generated profile, will not include the right optical coverage for a fullframe camera model.
    Another option is to "kludge" a copy of an existing Raw-only profile, so that it supports JPG instead. This just requires a text editor - you change a line within a structured-text file, from Camera Raw="True", to "False". Then you save that into the Lens Profile folder in the Adobe / CameraRaw area inside your user login's "application data" area.

  • When i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.

    when i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.  How can I fix this?

    There's been a problem with this all day.  Seems to be a server problem  -  wait a day and try again, or use itunes on the computer to update, that works.

  • Is there an App for the iPad that will show my GPS position on a world map, even if I'm at sea?

    Is there and App for the iPad that will show mu GPS position on a world map, even if I'm at sea?
    Thanks,
    Tomac

    BobTheFisherman wrote:
    GPS will show your position anywhere if your device has unobstructed view of the GPS satellites. The issue is that you must find a maps/charts that include all areas of the sea.
    There is no mobile data connection required to use GPS on land or sea. Once again your issue is the availability of downloadable maps/charts for the areas you will be traveling.
    Sorry, but you can't install an app like NAVIGON on an iPad without 3G cellular data connection:
    copied from NAVIGON app:
    ...can be installed on any iPhone3GS, iPhone4, iPhone4S, iPhone5 or iPad device (the navigation function is only available on the iPad WiFi+3G)
    Can I navigate with my mobile phone?
    Answer:In principle yes. For mobile phones there are both Onboardnavigation solutions and Offboardnavigation solutions.
    The following requirements must be fulfilled:
    •     The software must support the mobile phone. NAVIGON software
          always comes with a compatibility list. The software is guaranteed
          to work only for the mobile phones on this list.
    •     The mobile phone must have a GPS receiver. Many new mobile
           phones come with a built-in GPS receiver. Otherwise you can use
           an external GPS receiver which is connected to the mobile phone
           by cable or Bluetooth.
    •     It should be noted that an offboard solution incurs costs for using
          the mobile phone network to communicate with the provider's server.
    Message was edited by: Ingo2711

  • [svn] 4074: FxNumericStepper now has a maxChars property, and it now restricts the characters that can be entered into its FxTextInput .

    Revision: 4074
    Author: [email protected]
    Date: 2008-11-11 14:10:34 -0800 (Tue, 11 Nov 2008)
    Log Message:
    FxNumericStepper now has a maxChars property, and it now restricts the characters that can be entered into its FxTextInput.
    Fixed a problem with 'restrict' in TextView. If there are no characters left to insert after restriction, do nothing; don't insert an empty string and thereby delete the insertion.
    QE Notes: None
    Doc Notes: None
    Bugs: None
    Reviewer: Glenn
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/TextView.as

    When I installed iTunes 7.3 I noticed some artwork
    was gone. I compared the actual file sizes to the
    backup and there was no change at all. I was able to
    get the covers again from the iTS, but as I really
    want to have the artwork inside the files, I tried to
    paste it into the tags (like I used to do since 7.0).
    That doesn't work, after pasting it, the artwork is
    gone again completely, but the files are now 4mb
    bigger. The artwork of these files (about 300 in
    total, and I cant figure out why some and some not)
    can not be browsed, but the rest of the tags is fine
    and the songs play just normal.
    I trashed one of the affected albums and re-added it
    from the backup. Now the tags in iTunes were gone
    completely! I re-entered the correct tags and let
    iTunes get the artwork from the iTS. The artwork
    shows, but not for all files of the album. So again I
    tried to paste it into the tags of all songs, and
    voila: all artwork of this album is gone again and
    the files are 4mb bigger.
    Same behaviour in iTunes 7.3.1.
    I'm happy I have a good backup of my music, and I
    think the artwork is still inside the files, but
    iTunes 7.3 and 7.3.1 mess it up. From what I see only
    non-iTS files are affected, but only iTS artwork is
    lost. NOT nice.
    Any ideas? I'm no really a friend of downgrading...
    After some more time consuming tinkering I still have no luck in giving certain files their artwork back. I better go back to 7.2 tomorrow... Apple keep that lousy 7.3.1 BS yourself

  • [svn] 4072: FxNumericStepper now has a maxChars property, and it now restricts the characters that can be entered into its FxTextInput .

    Revision: 4072
    Author: [email protected]
    Date: 2008-11-11 14:08:39 -0800 (Tue, 11 Nov 2008)
    Log Message:
    FxNumericStepper now has a maxChars property, and it now restricts the characters that can be entered into its FxTextInput.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-16293, SDK-16627
    Reviewer: Glenn
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16293
    http://bugs.adobe.com/jira/browse/SDK-16627
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as
    Property Changed:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as

    When I installed iTunes 7.3 I noticed some artwork
    was gone. I compared the actual file sizes to the
    backup and there was no change at all. I was able to
    get the covers again from the iTS, but as I really
    want to have the artwork inside the files, I tried to
    paste it into the tags (like I used to do since 7.0).
    That doesn't work, after pasting it, the artwork is
    gone again completely, but the files are now 4mb
    bigger. The artwork of these files (about 300 in
    total, and I cant figure out why some and some not)
    can not be browsed, but the rest of the tags is fine
    and the songs play just normal.
    I trashed one of the affected albums and re-added it
    from the backup. Now the tags in iTunes were gone
    completely! I re-entered the correct tags and let
    iTunes get the artwork from the iTS. The artwork
    shows, but not for all files of the album. So again I
    tried to paste it into the tags of all songs, and
    voila: all artwork of this album is gone again and
    the files are 4mb bigger.
    Same behaviour in iTunes 7.3.1.
    I'm happy I have a good backup of my music, and I
    think the artwork is still inside the files, but
    iTunes 7.3 and 7.3.1 mess it up. From what I see only
    non-iTS files are affected, but only iTS artwork is
    lost. NOT nice.
    Any ideas? I'm no really a friend of downgrading...
    After some more time consuming tinkering I still have no luck in giving certain files their artwork back. I better go back to 7.2 tomorrow... Apple keep that lousy 7.3.1 BS yourself

  • In my Adobe profile, where can I find a list of the questions that I have previously asked?

    After signing into my Adobe Communities account, how do I find a list of the questions that I have previously asked on forums.adobe.com.  For example, View Profile > Activity only displays one question in my account (though I have asked more).  Thanks.

    Look at your profile 'content' section for a complete list of the discussions you have created or participated in by replying to someone else. There are four threads excluding this one, going back to June 2014 when you first registered your AdobeID.
    /people/AdVictoriam/content

Maybe you are looking for