Is there a list somewhere of HP Failure IDs and what they mean?

I'm getting the following Failure ID when I run system disgnostic test on the HDD in a HP Envy
U0823F-6BA705-XD7X1F-60UE03
Anyone know what it means or where I can find out?
The disk itself appears to be running ok. I ran a chkdsk \F on it in a separate computer which found and fixed a few problems. I've also done a full restore of Windows on the disk (separate issue) but I still get the above Failure ID after this

Hi there,
I managed to find an old list of compatibility with HS-44 / AD-44 but nothing for the adaptor on it's own.
Nokia 3600 Slide
Nokia 3710 Fold
Nokia 3720 Classic
Nokia 5610 XpressMusic
Nokia 5700 XpressMusic
Nokia 6110 Navigator
Nokia 6120 Classic
Nokia 6210 Navigator
Nokia 6212
Nokia 6220 Classic
Nokia 6290
Nokia 6700 Slide
Nokia 6730 Classic
Nokia 7610 Supernova
Nokia E66
Nokia E71
Nokia E90
I can't promise this is ALL th ehandsets though, since the list is quite old. Also I am almost certain that this adaptor converts Nokia 2.5mm to Nokia 3.5mm, Nokia connectors are different to a standard headphone as there is an additional connection for voice.
If using non -Nokia headphones you may need a further adaptor.
Hope this helps a little?

Similar Messages

  • Is there a listing of error codes and what they mean?

    Continually get -3150 and -3252 codes. Can't find info when I search the site. Looks like lots of other error codes. Didn't know if anyone knows where to find a list of what the codes mean...and ways to make them stop.
    Thanks.

    It happens when the server can't connect to LDAP server. Check to make sure your server is connecting to directory server by going to "Users & Groups" tab in the administration server UI.

  • Is there a list somewhere of Nokia phones that the...

    Why I am asking this question is my Nokia 6600 fold went faulty (see note below about this) and has been replaced by O2 with a Nokia 6700 slide. Now I don't like slide phones so I bought a 7020 fold on eBay.
    What I am looking for is an adapter for these phones (each have 2.5 mm AV connector) that will allow me to connect my noise cancelling headphone's 3.5 mm jack to (I was able to do this on the adapter that came with my 6600 fold phone).
    I googled and found that one option may be the Nokia AD-44 but I am not sure it will work with either the Nokia 6700 slide or 7020 fold.
    So my question, is there a list somewhere of Nokia phones that the AD-44 adapter will work with?
    Note: the faulty Nokia 6600 fold phone was a replacement for the original Nokia 6600 fold phone and both have had the well documented 'm, n, o' problem when sending a message that locked the phone and all that could be done was to power off!

    Hi there,
    I managed to find an old list of compatibility with HS-44 / AD-44 but nothing for the adaptor on it's own.
    Nokia 3600 Slide
    Nokia 3710 Fold
    Nokia 3720 Classic
    Nokia 5610 XpressMusic
    Nokia 5700 XpressMusic
    Nokia 6110 Navigator
    Nokia 6120 Classic
    Nokia 6210 Navigator
    Nokia 6212
    Nokia 6220 Classic
    Nokia 6290
    Nokia 6700 Slide
    Nokia 6730 Classic
    Nokia 7610 Supernova
    Nokia E66
    Nokia E71
    Nokia E90
    I can't promise this is ALL th ehandsets though, since the list is quite old. Also I am almost certain that this adaptor converts Nokia 2.5mm to Nokia 3.5mm, Nokia connectors are different to a standard headphone as there is an additional connection for voice.
    If using non -Nokia headphones you may need a further adaptor.
    Hope this helps a little?

  • Is there a replacement for CS6 coming out soon and what will it be called

    Is there a replacement coming out for CS 6 and what will it be called

    Adobe still sells CS6 (for now anyway).
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html
    Click the Buy button then I want to buy: Upgrade. Then complete your purchase.
    However, the days of upgrading every other version are gone. Before Adobe released the Cloud, starting with CS6, they amended the upgrade policy and were requiring upgrades with every version.
    But that all disappeared soon after when Adobe chose to discontinue perpetually licensed versions altogether last year and go 100% Cloud (subscription) only when they launched CC. They're still selling CS6 for those who insist on it but it'll no doubt disappear over time and there will be no CS7 perpetually licensed version.
    The future in Adobe's eyes without doubt is the Cloud, requiring monthly payments and automated periodic license checks on Adobe servers via the internet.

  • What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    Well, I installed the latest iTunes this AM, works perfectly.  Although for some reason it did lock up after playing a song today.
    Horror stories?  That's a bit overly dramatic.
    No, it isn't.
    The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
    A simple search was conducted, no one seemed to have an answer.  Do you always adopt such a haughty attitude?  Or was I just lucky.

  • Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    (Apologies for butting in wiclee.)
    The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
    Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
    iTunes 10.1 Missing Text

  • Where is list of keys and what they do?

    Where can I find a list of keys and what they do. I'm a command line kind of guy.
    Using Mac mini / Panther
    larryalk

    364/2810
    Hi larryalk,
    welcome to Discussions!
    In addition to Kurt's excellent link,
    Here are the ones you can print "just in case":
    - Shortcuts for freezes
    This one has all useful links:
    - Mac OS X keyboard shortcuts
    This one is very handy:
    - Mac OS: Apple Pro Keyboard Shortcuts for Shut Down and Restart
    Also:
    Many keyboard shortcuts are not documented. Just try holding the Option key in combination with the usual ones, see what it does. Same with the Control key and the Shift key.
    In popping dialog boxes:
    Usually command+dot = Cancel, and
    hitting the initial letter often equals a mouse-click.
    In the menubar and the menus:
    Also simply hitting a letter.
    Or two letters if needed, like HI = History when H(E) = Help.
    ⇧ Shift
    ⌥ Option
    ⌘ Command
    ⌃ Control
    Have fun!
    Axl
    Happy New Year Kurt!

  • HT1222 How can I check if I currently have QuickTime 7?  Is there a charge for QuickTime 7.7.3 and what is the charge for the QuickTime 7 Pro registration?

    How can I check if I currently have QuickTime 7?  Is there a charge for QuickTime 7.7.3 and what is the charge for the QuickTime 7 Pro registration?

    This is the iPhone forum, you should check the Quicktime forum. But, to try and help a little, I would say go to Help, About Quicktime and it should tell you what version it is. Also, Quicktime Pro does have a cost involved.

  • Can I get a list of all binary files and what they do?

    I'm a newbie to Oracle. Needless to say I'm blindly muddling my way through the experiance of installations/setup and managing my first database. I realize that there is a three tier system and for my system all three of the tiers are on the same pc! In short I need help with what executables do what. I've tried going through Linux howto's, online docs, and even bought a book on the subject but the book seems to stroke the benifits of using Oracle instead of actually telling me how to use Oracle. I'm using Oracle8i 8.1.7 EE (enterprise edition) on Linux RH 7.0. I would like a link to a list or the actuall list of all the binary files in $OracleHOME/bin/ and what each of them do. Also important log files I should consult regularly would be most helpfull. Thanks.

    While you're at it, see if you can get a complete description of all the X$ tables.

  • I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks.  Ricco

    I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

    Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

  • Deploymentshare : local or DFS? What is best for performance and failures? And what about multicast in relation to DFS?

    Hi,
    we use MDT 2013 on MS Server 2012 Standard. We deploy LTI's. We have only one (virtual) MDT-server and that has only one deploymentshare. I'm having now a discussion with my colleague about where to put the deploymentshare. He says that we should put it
    on our fileservers (which use DFS) because it's more safe and more dynamic (no idea what he means with that).  But to me it appears quite strange to separate an application and its main folder structure. I have this idea that those two need to be as close
    as possible, like to avoid network problems for instance. It's also a fact that our MDT-server is backed up every night, so if something bad happens we just ask our colleagues to restore the latest snapshot. Can someone explain which option is the better and
    why : local or DFS?
    Second thing which is related to my first question: I've read on this forum about multicast not being possible when the deploymentshare is not local on the server? Am I correct? Anymore info about this issue would be nice too. Awaiting your answers I'll
    keep looking for more clues everywhere.
    thanks,
    Paul

    IN addition to what is mentioned here.
    MDT works great with DFS. However note that MDT is *NOT* supported with Domain DFS, only stand-alone DFS, because Domain DFS implies that the client is joined to a domain when you make the call, and MDT needs to run within WinPE, where there is no domain
    infrastructure.
    Multicast should be on the same machine as your DeploymentShare, wherever that may be. If you have DFS, your deployment share would be the root.
    Another idea is to use DFS to replicate out to your DFS leaf nodes, and each Leaf node would be it's own WDS Server with Multicasting being done from there.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • In my Itunes account, I can not see my list of songs in my files, nor can I look for individual songs in the Itunes store. Basically, anywhere there are list, I can not see them. What can I do to fix this problem?

    I am having trouble with my Itunes account on Windows XP . I can not see any list in my music files. The songs are there but I have to click on each song to see what it is. Also, in the itunes store, I can not see any pull down list or use my search bar. This happened when Itunes updated it's look. I can pull it up on my phone and see all of my purchased music. I would really appreciate knowing how to fix this problem. Thank you.
    Traci Lemley

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • Where is there a comprehensive list of Icons and what they stand for, represent, and/or mean

    Where is there a comprehensive list of icons that shows what each stands for, represents, or means?
    Specifically the small box near the pointing mouse or hand.

    That small box is probably the tooltips box discussed in the following thread. See if '''cor-el''''s solution works for you as it did for the original poster in that thread.
    https://support.mozilla.com/en-US/forum/1/544389?

  • HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

    I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

    Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
    If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • There were multiple charges to my account. Wondering what they were for and how to get them reversed.

    I show 6 different charges for $7.99 on my account. All charged on the same day over the weekend. I was told by Hulu that my account had been closed when I never closed it. I re-opened it and have since been charged twice by them and the other 4 from iTunes. I'm assuming be re-subscribing is where the mix-up happened. Please let me know who I can contact to reverse the charges and straighten everything out.
    Thank you in advance.
    Katt

    Click here and ask the iTunes Store staff for a refund. If a credit card got charged, you can also contact the card's issuer and dispute it.
    (123375)

Maybe you are looking for

  • Sending image sequence job to compressor in command line : how to set the framerate?

    Hello, In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task. I want to dlo the same thing with command line. I know how to send a compressor

  • How to capture DB Errors and display as pop-up message

    Hi All, I am using Jdeveloper 11g Release 2 (11.1.2.3.0). In my AppModuleImpl.java, I defined a class to call PL/SQL procedure and exposed the same as Client interface. Pulled this method from data control on to a page a Button. The functionality is

  • A password manager for Midori

    Hello to everyone, being a would-be Midori user that lacks a password manager, some time ago I made a script that worked as a password manager. Now I've made a Midori extension for this task and made it available on AUR http://aur.archlinux.org/packa

  • Mozilla Firefox crashes repeatedly in ubuntu 12.04 desktop version now what to do to solve this problem?

    Mozilla Firefox 20.0 crashes repeatedly I had tried by disabling cookies, addones uninstall & reinstall firefox completely after that problem still exists. at anytime it crashes. & we have to restart Firefox.

  • NWDS DATA DICTIONARY TABLE ISSUE

    Hi, I created a table in Data Dictionary. I created a new archive and deployed the SDA files successfully, but could cannot see the table in the Oracle Database. It says "Table or view does not exists".  What could be the error? How can i see the tab