Is there a local install version of Edge Inspect?

I work in a corporate environment that blocks access Adobe CC. We have the Adobe Master Suite CS6. Can I still get a local installation version of Edge Inspect?
Message was edited by: joshvito

Can you explain what you mean by "Adobe CC is not available in my work environment"?
If you can reach this web page https://creative.adobe.com/products/inspect you should be able to download and install Edge Inspect. That's the only place it's available for download, and it only requires that you have an Adobe ID, which you do since you can post on the forums here.
Are you unable to reach our weinre server, or can you explain specifically doesn't work for you?
Thanks,
Mark

Similar Messages

Outlook 2013 (Local Install) Marks All Replied To Emails as Draft

I am running a local installed version of Outlook 2013 on a Windows 8.1 Pro PC and every email I reply to is permanently marked as
[Draft] automatically by Outlook.
I think it happens immediately I start to type a reply which, obviously, takes some time, even if only a few seconds.
It's during this typing interval that I think Outlook adds the [Draft] marker.
Unfortunately, the message itself isn't a draft (it's the original received message to which I am replying) and even if it were, once I click SEND the mark should be removed surely?
Incredibly, given the maturity of the product and it's importance in the MS inventory, there is a lot wrong with Outlook 2013 and I am seriously considering going back to Outlook 2010; does anybody else feel the same?

Hi,
Do you mean it happens when you directly reply to an email in your Inbox? I think it's a new feature in Outlook 2013 called Quick Response. See:
http://blogs.office.com/2012/10/24/quicker-replies-in-the-new-outlook/
As stated in the article above, Quick Response simplifies the experience of responding to email and lets you reply directly from your inbox, without the hassle of opening a new window.
However, if you don't like this feature, we can turn it off by going to
File > Options > Mail, scroll down to the "Replies and forwards" section, then tick the check box labelled "Open replies and forward in a new window". Click
OK and then try replying again.
Hope this helps.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Is there a limit as to how many devices you can connect with Edge Inspect?

Is there a limit as to how many mobile devices you can connect with Edge Inspect?
Also, do we need a dedicated wi fi hub for all these devices? Are there any wi fi limitations with connecting more than 20 devices and connecting to wi-fi?
Thanks

The free version of Edge Inspect limits you to connecting to one device concurrently. (You can certainly disconnect from that one and connect to another if you wish, but it's just one at a time.)
If you purchase an Edge Inspect subscription, or have a paid Creative Cloud membership, then you can connect an unlimited number of devices concurrently. (Note that I have seen up to 35 connected at once.)
For info on purchasing options, see this blog post: http://blogs.adobe.com/edgeinspect/2012/10/23/how-to-purchase-edge-inspect/
It does not have to be a decicated wifi router, although it certainly can if that makes sense for you. For example, at my home I have a single wifi router that I always use for my laptops and video streaming devices, with my desktop computer connected to the same router on Ethernet, and I can connect my 5 tablets and 2 mobile phones to Edge Inspect on the same router with no issues.
My router says it can support up to 250 connections at once (Ethernet + wifi); however, I have nowhere near that many devices so I could not put that to the test. I think a more reasonable limit is around 30; however, that is just based on having to share bandwidth. You might want to check what your router says is its limit.
Just keep in mind that the more devices you have downloading data, the slower the performance will be.

How can I access Edge Inspect from my Creative Cloud account?

In the Edge FAQ it is stated, that all Edge apps are available for free (with certain restrictions). It is also said that those free versions are not limited to a certain timeframe, but I need a free Creative Cloud subscription to access them.
Edge Inspect doesn't appear in my apps tab though. And I cannot activate a free Creative Cloud subscription either, because that is limited to 30 days.
My question is, if I can use the free version of Edge Inspect. If yes, how? If no, why is there a free version that no one can use for free, only evaluate for 30 days?

Does you computer meet the Tech Specs for Adobe Edge Inspect http://html.adobe.com/edge/inspect/tech-specs.html?

Problems with edge inspect

I have downloaded adobe edge inspect cc on my computer and the creative cloud says it is up to date and the icon is on my toolbar and it says it is open but does nothing. When I try to connect the adobe edge inspect plug in I get the message: cdnewhire 1, waiting for a connection. Any advice?

I'm assuming that the edge inspect application is running, Does it say you need to install a new version of Edge Inspect ?
Regards,
Vishakha

Edge Inspect not available for download (mac)

I've check the system requirements, and as far as I can tell I have what it takes. MBP i7, 8GB RAM, OSX 10.8.2. But Edge Inspect is not available for download/install neither in the creative cloud webpage, or in the application manager. Whyy?

The issue should now be fixed. The direct link that you should be taken to for download is https://creative.adobe.com/inspect. From there click the Download button. Edge Inspect will not appear as an Install link in the Adobe Application Manager, you need to get it from the website.

Using Edge Inspect on Apple Watch for prototyping

I'm curious if there will come an update for the iOS version of edge inspect to enable support for the apple watch Or is this technically impossible, because it hasn't have a native browser? At the moment I use edge animate mainly for prototyping and it would be nice to test my apple watch designs on the the apple watch.

The two networks can talk to each other.
That port 7682 is open on both.
These two steps can mean three things:
Mobile device can reach computer initiating connection to it using TCP port 7682 (mobile device is a TCP client, computer is a TCP server)
Computer can reach mobile device initiating connection to it using TCP port 7682 (computer is a TCP client, mobile device is a TCP server)
Both mobile device and computer are TCP server and TCP clients simultaniously
Based on previous information in this thread I would stake on #1. Am I right?

The edge inspect installer is not shown

I can't see the install file for edge inspect. Can you anyone point me to the actual link to start the download
thanks

Hi,
Sorry to hear about the inconvenience. Following ar ethe instructions to install Edge Inspect:
1. Go to https://creative.adobe.com/apps (as you already have)
2. Click On blue coloured 'Learn More' button below Edge Inspect
3. You will be directed to link http://html.adobe.com/edge/inspect/
4. Click on 'Get Started' on the page in Step 3
5. If you are not signed in Creative Cloud, it should ask to sign in. If signed in - you will be directed to Creative cloud page
6. Click on Ede Inspect app and 'Learn more' button one more time
7. You shoud see the download instructions
Please let us know if the instructions were useful and you are able to download Edge Inspect.
Thanks,
Archna

JNLP javaws error: requested version of JRE...not locally installed

Greetings,
First: I am a user not a developer and have very limited understanding of JDK, JRE, and Java Web Start. I just want to figure out how to get these applications to run. I suspect it is a JAVA bug that is peculiar to my particular Windows XP-SP2 system configuration.
My Problem: When trying to run (two different/independent applications) java web start applications, I get the following error.
The application has requested a version of the JRE (version 1.4) that currently is not locally installed. Java Web Start is unable to automatically download and install the requested version. This JRE must be installed manually.+
For reference, the Launch file is:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
codebase="http://gnlewis.ic.edu/~webmo/webmo/java"
spec="1.0+" >
<information>
<title>MOViewer</title>
<vendor>WebMO, LLC</vendor>
<description>MOViewer application</description>
<description kind="short">A Java interface for viewing molecular orbitals.</description>
<homepage href="www.webmo.net"></homepage>
<icon href="images/splash.gif"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.4+"/>
<jar href="MOViewer.jar"/>
<jar href="Jmol.jar"/>
</resources>
<application-desc main-class="net.webmo.moviewer.MOViewerFrame"/>
</jnlp>
I should note that the required JRE is installed. I have various builds of versions 1.4 through 1.6 installed on my laptop. And my gut tells me that it is not the JNLP file that is the problem. I believe it to be a problem (bug) with java, JRE, or javaws that shows up with my particular PC configuration (which I did not set up but don't believe is particularly unusual).
Another interesting and possibly related problem, is that when I goto the java application control panel (Start->Control Panel->Java) and select the "Java" tab, there is a lower section for "Java Application Runtime Settings". If I slect the "View" button a screen appears with two tabs: User and System. There are no entries under either tab. I can "Add" an entry under the user tab (and find the path to the correct java version etc.) and "Apply" the settings. I cannot add anyting under the system tab (even the my user ID is part of the administrator group and should have full system access). Even after applying this change, I still cannot run the java web start application. If I close the control panel and reopen it, the JRE path that I "added" is no longer listed under "View". This seems odd behavior. It is as if there is some configuration file or environment variable somewhere that is not getting set/saved.
Please....is there anyone that has seen this problem and has a suggested fix. I have googled this problem and found a very few seemingly relevant pieces of info but it seemed more of a developer issue and I do have the background to understand the proposed fixes.
Thanks, in advance, for your assistance.
--Clay

I have the same error message, just a different java version:
I have Java 6 installed, but the application wants 1.5 or newer :O
Message:
The application has requested a version of the JRE (version 1.5+) that currently is not locally installed. Java Web Start is unable to automatically download and install the requested version. This JRE must be installed manually.
Launch file:
JNLPException[category: System Configuration : Exception: null : LaunchDesc:
<jnlp spec="1.0+" codebase="http://192.168.125.25:8421/ibm/dircon/">
<information>
    <title>IBM Launched Tasks</title>
    <vendor>IBM Corporation</vendor>
    <homepage href="http://www.ibm.com"/>
    <description kind="one-line">IBM Launched Tasks</description>
    <icon href="http://192.168.125.25:8421/ibm/dircon/images/dir_licext.gif" kind="default"/>
</information>
<security>
    <all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
    <java href="http://192.168.125.25:8421/ibm/jreinst/installer" version="1.5.0+"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/Director.jar" download="eager" main="true"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/DirLibs.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/DirUIL.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/monitorinf.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/lic.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/USMSEngine.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/USMSKernelServices.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/ITDDefaultProductInfo.properties.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/dircon_inst.jar" download="eager" main="false"/>
    <extension href="http://192.168.125.25:8421/ibm/dircon/lib/jnlp/dircon_extensions.jnlp"/>
    <extension href="http://192.168.125.25:8421/ibm/dircon/lib/jnlp/dircon_inst_ext.jnlp"/>
    <property name="twg.help.dir" value="http://192.168.125.25:8421/ibm/dircon/ConsoleHelp/"/>
    <property name="dir.env" value="lic"/>
    <property name="twg.log.output" value="1"/>
    <property name="twg.code.base" value="\\Director"/>
    <property name="twg.directory.root" value="\\Director"/>
    <property name="twg.directory.classes" value="\\Director\\classes"/>
    <property name="twg.directory.data" value="\\Director\\data"/>
    <property name="twg.directory.log" value="\\Director\\log"/>
    <property name="twg.directory.proddata" value="\\Director\\proddata"/>
    <property name="twg.directory.tempdata" value="\\Director\\tempdata"/>
</resources>
<application-desc main-class="com.tivoli.console.ConsoleLauncher">
    <argument>192.168.125.25</argument>
      </application-desc>
</jnlp> ]
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception:
JNLPException[category: System Configuration : Exception: null : LaunchDesc:
<jnlp spec="1.0+" codebase="http://192.168.125.25:8421/ibm/dircon/">
<information>
    <title>IBM Launched Tasks</title>
    <vendor>IBM Corporation</vendor>
    <homepage href="http://www.ibm.com"/>
    <description kind="one-line">IBM Launched Tasks</description>
    <icon href="http://192.168.125.25:8421/ibm/dircon/images/dir_licext.gif" kind="default"/>
</information>
<security>
    <all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
    <java href="http://192.168.125.25:8421/ibm/jreinst/installer" version="1.5.0+"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/Director.jar" download="eager" main="true"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/DirLibs.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/DirUIL.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/monitorinf.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/lic.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/USMSEngine.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/USMSKernelServices.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/ITDDefaultProductInfo.properties.jar" download="eager" main="false"/>
    <jar href="http://192.168.125.25:8421/ibm/dircon/lib/dircon_inst.jar" download="eager" main="false"/>
    <extension href="http://192.168.125.25:8421/ibm/dircon/lib/jnlp/dircon_extensions.jnlp"/>
    <extension href="http://192.168.125.25:8421/ibm/dircon/lib/jnlp/dircon_inst_ext.jnlp"/>
    <property name="twg.help.dir" value="http://192.168.125.25:8421/ibm/dircon/ConsoleHelp/"/>
    <property name="dir.env" value="lic"/>
    <property name="twg.log.output" value="1"/>
    <property name="twg.code.base" value="\\Director"/>
    <property name="twg.directory.root" value="\\Director"/>
    <property name="twg.directory.classes" value="\\Director\\classes"/>
    <property name="twg.directory.data" value="\\Director\\data"/>
    <property name="twg.directory.log" value="\\Director\\log"/>
    <property name="twg.directory.proddata" value="\\Director\\proddata"/>
    <property name="twg.directory.tempdata" value="\\Director\\tempdata"/>
</resources>
<application-desc main-class="com.tivoli.console.ConsoleLauncher">
    <argument>192.168.125.25</argument>
      </application-desc>
</jnlp> ]
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
deployment.properties:
deployment.javaws.jre.1.registered=true
deployment.javaws.jre.1.enabled=true
deployment.javaws.jre.1.osarch=x86
deployment.javaws.jre.1.osname=Windows
deployment.javaws.jre.1.path=C:\\Program Files\\Java\\jre1.6.0_07\\bin\\javaw.exe
deployment.javaws.jre.1.location=http://java.sun.com/products/autodl/j2se
deployment.javaws.jre.1.product=1.6.0_07
deployment.javaws.jre.1.platform=1.6
deployment.javaws.jre.0.osarch=x86
deployment.javaws.jre.0.enabled=true
deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.path=C\:\\Program Files\\Java\\jre1.6.0_02\\bin\\javaw.exe
deployment.javaws.jre.0.platform=1.6
deployment.javaws.jre.0.osname=Windows
deployment.javaws.jre.0.registered=true
deployment.javaws.jre.0.product=1.6.0_02
deployment.browser.path=C\:\\Program Files\\Internet Explorer\\IEXPLORE.EXE
deployment.version=6.0
deployment.javaws.splash.index=C\:\\Documents and Settings\\adamd292\\Application Data\\Sun\\Java\\Deployment\\cache\\6.0\\splash\\splash.xml

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

There is a later version of Itunes, yet each time i try to install i get a error message

there is an later version available for my Itunes, it will download but wont install?

What does the error message say? (Precise text, please.)

I want to install idvd 6 from an install disc. I have idvd 7 already installed. It will not let me because of the later installed version. Is there a way to install the earlier version?

I want to install idvd 6 from an install disc. I have idvd 7 already installed. It will not let me because of the later installed version. Is there a way to install the earlier version?

Delete of hide the existing iDVD application T and all files with "iDVD" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iDVD from the disk it came on originally.
OT

Edge Inspect installed and running, but icon in chrome is grey (chrome version 42.0.2311.135 m). What is the problem?

Edge Inspect installed and running, but icon in chrome is grey (chrome version 42.0.2311.135 m). What is the problem?

By the way: within Edge Code CC the same problem appears (Edge Inspect seems not to be switched on).

Is there a way to re-install version prior to 6.0.5.20

This is in reference to discussion thread: CPU Usage Extreme during importing.
Since the above appears to be something that we are going to have to wait until Apple addresses, i was wondering if I can re-install the previous version so that I can add music in the meantime.

Hmm, no way to tell. You'd probably have to go back to 6.0.4.
The checkmarks, playcounts, ratings are stored in the iTunes library.itl file
What are the iTunes library files?
And I don't know if the 6.05 version that you currently have is backwards compatible with 6.04
Also, you won't be able to install over the existing installation. The install package does a version check and will tell you there is a newer version on your PC, then stop.
You'll have to remove iTunes and QuickTime using control panel.
And this doesn't help you at all, but in the future it might.
Make a practice of renaming the iTunesSetup.exe to something like iTunesSetup605.exe before you download the current version. Also, save the 2 library files in another folder. That way, you can downgrade a lot more easily if you need to.

How To: Use Visual Studio, IIS Express, and Adobe Edge Inspect to view local projects

You CAN view a Visual Studio project with Adobe Inspect. The work around takes a little bit of time.
This involves using IIS Express to run your Visual Studio project, which is mainly a setting in Visual Studio, a Firewall change, a few command line and IIS Express config change. It isn't actually all that bad, but will make your life A LOT easier.
Here are the steps. (Note these are steps I used for Visual Studio 2012 and your project is part of a solution project. Windows 7 or Windows 8)
1. If IIS in not turned on, turn it on.How to: Enable Internet Information Services (IIS) - this should install IIS Express as well.
2. In Visual Studio, find the port that Visual Studio will be using for your project by Running your web project (Debug), and note/write down/save the port number that shows up in the browser when the project launches. (ex. http://localhost:12345)
3. Add a NetShare Reservation (process for this will be different for Windows XP)
Go to your Command Line (CMD) in Windows and in c:\Windows\system32> type in
netsh http add urlacl url=http://yourIPaddress:yourPortNumber user=everyone
(ex. netsh add urlacl url=http://12.34.56.78:12345 user=everyone)
Hit Enter key. You should be a successful add reservation message
3. Go to your Windows Explorer (File system) and go to c:/Users/YourName/MyDocuments (or Documents)/IISExpress/config/ and open 'applicationhost.config'
In the 'applicationhost.config' file find your site in the <sites> section.
Example:
<sites>
<site name="WebSite1" id="1" serverAutoStart="true">
                <application path="/">
                    <virtualDirectory path="/" physicalPath="C:\MyProjects\TestSite" />
                </application>
                <bindings>
                    <binding protocol="http" bindingInformation=":12345:localhost" />
                </bindings>
            </site>
</sites>
In this section ADD 2 new lines to the <bindings> section. Note add your own IP address and your own Computer Name
<binding protocol="http" bindingInformation="*:12345:12.34.56.78" />
<binding protocol="http" bindingInformation=":12345:MyComputerName" />
Save the config file.
4. Open up your Windows Firewall and go to 'Advanced Settings'. Here you want to create an Inbound Rule.
Right click on Inbound Rule and select New Rule
- Rule Type select 'Custom'
- Program leave this
- Protocol and Ports > Protocol Type select 'TCP' then Local Port select 'Specific Port' and fill in the port number you got from VS. Leave Remote Port alone.
- Scope
There are a few ways of doing this. Typically you would go the the Remote IP address and select 'These IP addresses: and select ADD > select 'Predefined set of computers' and choose Local Subnet. IF this does not work leave Remote IP addresses > Any IP address option selected instead.
- Action leave this
- Profile select Domain and Private
- Name put IISExpressWeb for the name
Select 'Finish'
5. Go to Visual Studio. (Note if you have multiple projects in your solution, choose your start up project. Right click on your project in Solution Explorer in VS and select 'Set as Start Up Project' )
Right click on your start up project again and you should see an option to 'Use IISExpress'
In the DEBUG dropdown (from the main menu bar at the top) select 'YourProjectName Properties'. Mine was the last one in the list with a wrench icon next to it.
This should open an new tab in your project, You should see a left hand list of option and a right hand column of options.
In the left column select 'Web' and in this tab select Use Local IIS Web server and select 'Use IIS Express' and type in your IP Address and port number (same as before) in the Project Url text box.
Save.
NOW, you should be able to run your project in Visual Studio and use Adobe Edge Inspect on your device and view new results in Chrome. You can develop from there.
If you still can not see it working, please be sure your device is on the same SubNet or Wireless network as your computer. If you are in a large network but the domains can still see each other, the Firewall Setting detailed above to allow Any IP Address in your Scope section.

Hi CMosqueda,
Thank you for taking time to share this information with other users.
Thanks,
Preran

Is there a local install version of Edge Inspect?

Similar Messages

Maybe you are looking for