Is there a log entry indicating the use of battery backup?

I have a Late 2013 iMac, 27" i7 780m running Mavericks 10.9.4 - Is there an entry in any of the System Report logs that shows whether or not the computer had to make use of a UPC battery backup?
I've experienced some of the same issues people have had with their system not waking from sleep, having to resort to using the power button to get things moving again. Today, however, we had a serious thunderstorm and when I got home the system was shut down (or possibly not wanting to wake from sleep - the iMacs have no glowing light like my old Mac Pro, so there's no way to tell if the thing is shut down, a "heavy sleeper", or what). I'm asking the above question because if the system ever does have to rely on the battery backup while I'm away I want a way to confirm the system is actually using the UPC and shutting down properly (via Power Management settings) and not simply getting knocked out by a power failure.
It's somewhat unrelated, but the not-waking-from-sleep issue factors into this because that problem seems to be unrepeatable under any controlled circumstances. The support documents starts with disconnecting peripherals that might cause an issue, but the problem pops up so infrequently (weeks apart) there's no way to know if a disconnected USB hub is the culprit or a red herring. Today, for example, I'm left wondering if my issue was a power outage (the UPC should have taken care of a safe shutdown) or if I had an iMac not wanting to wake from sleep.

Go to Settings>iCloud>Storage & Backup>Manage Storage. Your backups are listed at the top, along with their sizes. Note: this will only list your most current backup. You may have your previous two backups available too but you cannot access any size information about them.

Similar Messages

Why do SQL sample programs work when there is no entry for the data sources in the ODBC Data Source Administrator that are used by the sample program?

Hi,
I am trying to understand how to access an SQL database from CVI.
I don't understand how the sample programs shipped with the toolkit can access the database they use if it is not listed in the ODBC Data Source Administrator.
In the code, I see the line:
hdbc = DBConnect ("DSN=CVI SQL Samples");
However, there is not an entry that I can find in the ODBC Administrator for "CVI SQL Samples."
The SQL help suggests there should be a User DSN named, "CVI32_Samples", but I don't see that entry in the ODBC Administrator on my win-7 system.
I believe the sample program is accessing a database file named, "C:\Users\Public\Documents\National Instruments\CVI\Samples\sql\samples.mdb".
Exactly how is the call to DBConnect() translated to the file, "samples.MDB", if there is no entry in the ODBC Administrator?
Regards,
Mark

I figured it out. There is a 32 bit ODBC administrator and a 64 bit ODBC administrator. The ODBC administrator I run through the control panel is the 64 bit ODBC administrator. To access the 32 bit administrator I need to run, "C:\Windows\SysWOW64\odbcad32.exe".
I am running the samples in 32 bit mode, so I need to use the 32 bit ODBC administrator.
Best,
Mark

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Is there a patch planned for the increase in battery use after I upgraded yesterday?

Is there a patch planned for the increase in battery use after I upgraded yesterday? I've closed all the open apps, I'm not using wifi and my battery is going down really quickly.

Restore the phone as NEW. There's no patch needed.

Remove a sleep log entry from the Lifelog

Is it possible to somehow remove a sleep log entry from the Lifelog?
I have an incorrect entry messing up my average value so I would like to get rid of it.
Solved!
Go to Solution.

It is possible to remove a single sleep activity. You scroll in the timeline to the activity you like to remove, then press the avatar while it’s sleeping. You will get a pop-up with sleep details for this specific sleep activity, press the trash can symbol and remove this activity.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Is there a fix yet for the loss of battery power after updating to Lion?

Is there a fix yet for the loss of battery power after updating to Lion? I've done the cmd-opt-shift restart and it didn't help. This problem has gone beyond annoying now - it is absolutely maddening! What is Apple's official response????

Chris: your friends are woefully uninformed, and no one should pay any attention to their bad advice.
http://www.apple.com/batteries/notebooks.html
http://support.apple.com/kb/HT1446?viewlocale=en_US
http://batteryuniversity.com/

My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phon

My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phone. Even if it didn't complete how to I restore the 5 g that did backup

Unfortunately you can't restore an incomplete backup.

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

Is there any way to track the use of an IMEI on a stolen iPhone 5?

I've had an iPhone 5 stolen.
Battery was dead so 'Find My iPhone' was no use -so far.
Problem is... my SIM-PIN is disabled so I need to deactivate the SIM in order to prevent fraudulent use of my contract account (if someone transferred the nano-SIM into another handset) -and to get services back.
Once I do this, the phone will have zero network coverage and shall be unable to receive "Find My iPhone" messages or transmit its position.
So, the difficulty here is that, in order to protect use of my phone account, I have to give up on any possibility of recovering my phone.
Also, the handset's PIN is enabled so a well-intentioned person who might find my phone would be unable to connect the phone, even to their WiFi, to provide it with coverage in order to receive my 'Find My iPhone' message.
I'm trying to figure out how I might use the IMEI to be made aware of the phone coming back up on a network somewhere at some future date? If so, I could contact the relevant network and track the calls and recover the phone.
I assume that as there is a handset PIN in use on the phone -some jailbreaking or similar shall be required to hack the phone and reset it?
If someone is going to that effort then clearly, the phone has been stolen rather than 'found'.
Any ideas?
Regards,
EUPREMIER

Apple, as I'm sure you know, now manage official phone 'unlocks' directly rather than the Newtork doing so.
When a GSM Network Provider buys a consignment of iPhone's they are locked to that carrier and may only be officially unlocked if said carrier requests it. If so, it is Apple who do this, via iTunes.
I am therefore inclined to think that part of the any generic iTunes syncing process involves the transmission of key hardware data, including IMEI, to Apple whenever the handset is synced.
If this is the case and, as each iTunes account is linked to a credit card, were Apple to maintain a database of genuinely stolen phones (ones reported to Police) they could advise said Police force when a stolen phone stuck its metaphorical head over the parapets once again? They would be able to identify the name & address of the new user.
I have spoken to the Police here in Ireland today and they regularly engage with Apple on such matters.
This may not be tracking as we know it Jim, (not using GSM Triangulation or GPS) but it's arguably even more targetted and leaves an indelible fingerprint of guilt on the thief.
The laws here are simple in this regard, if you are in possession of stolen property, knowlingly or otherwise, you forfeit the goods once the Police show up. Whether you get prosecuted depends on whether you stole the goods or were duped into purchasing them.

Is there a way to enforce the use of sequences

is there a way to stop someone from inserting an id without using the sequence?
CREATE SEQUENCE id_seq
   START WITH 1;
CREATE TABLE test_table (id_seq NUMBER (4) PRIMARY KEY);
INSERT INTO test_table
     VALUES (id_seq.NEXTVAL);
INSERT INTO test_table
     VALUES (2);
INSERT INTO test_table
     VALUES (id_seq.NEXTVAL);gives us
ORA-00001: unique constraint (DSAMSTRC.SYS_C0091648) violated
as it should
however is there a check constraint of some ilk that ensures that the user is using the sequence when doing inserts?
so that the second insert
INSERT INTO test_table
     VALUES (2);gives me some sort of check constraint violation that I'm not using the id_seq.NEXTVAL ?

Justin:
One minor problem with your trigger. If the "bad" insert is the first thing done in the session you get:
SQL> insert into test_table values(25);
insert into test_table values(25)
ERROR at line 1:
ORA-08002: sequence ID_SEQ.CURRVAL is not yet defined in this session
ORA-06512: at "OPS$ORACLE.TRG_TEST_TABLE", line 4
ORA-04088: error during execution of trigger 'OPS$ORACLE.TRG_TEST_TABLE'If you want to raise an exception instead of just silently using the sequence as Frank suggests you need something more like:
create trigger trg_test_table
   before insert on test_table
   for each row
declare
   l_currval integer;
   no_currval exception;
   PRAGMA EXCEPTION_INIT (no_currval, -8002);
begin
   select id_seq.currval
   into l_currval
   from dual;
   if( l_currval != :new.id_seq ) then
      raise_application_error( -20001, 'Hey! Use the sequence' );
   end if;
exception
   when no_currval then
      raise_application_error( -20001, 'Hey! Use the sequence' );
end;John

Is there a LabView example in the use of user defined error codes?

Specifically, I have a VI that tests four arrays of data against various high/low limits. I have pass/fail outputs for 18 tests. I'd like to combine these into an 'error out' cluster with appropriate error codes and messages, for which I've created an x-errors.txt file.
My first question must be trival - how do I just set the 'status' bit of the error stream to let the general error handler then look up the error desription from the file?
Secondly - I can't find an example of this in the technical resourses, amI missing something?
Thanks,
Mike
Mike Evans
TRW Conekt
N.I. Alliance Member, UK
http://www.Conekt.net

There is no example program. There is extensive help on how to do this. Here's the basics.
1) There are two ways to define user error codes in LV6.1. If you are using LV6.0 or earlier, only one method is possible.
2) The 6.0 method involves wiring arrays of error codes and arrays of error code strings to the General Error Handler.vi. These codes will be used to explain any error code which is undefined in LV's internal error code database. Error codes reserved for users which are guaranteed not to be used by NI are from 5000 to 9999.
3) The 6.1 method allows you to create a specially formatted error code file on disk that will be merged with the LV error code database each time LabVIEW launches. For help on this, go to LV's online help, and in t
he Index tab, type
"user-defined error codes, in text files"
(without the quote marks)
4) If you want to set an error into the error cluster, use the General Error Handler.vi again. Wire your error code value to the Error Code terminal (the leftmost-topmost corner terminal). Wire the name of your VI to the Error Source terminal, and wire "No Dialog" to the Type of Dialog terminal (left-side, near the bottom). The error code cluster that comes out of this VI will either be the error in (if one was set) or a new error code cluster with your error and the status bit set to TRUE.
5) The attached demo is written in LV6.0.
Attachments:
Error_Demo.vi ‏37 KB

I create a group and there is no entry in the WLCS_ENTITY_ID table

Hello all,
I have a problem. I create a top-level group in WLPS using the
UserManager's createGroup method, passing the group's name as the first
parameter and null for the second parameter. This creates a row in the
WLCS_GROUP table, but it does not add one in the WLCS_ENTITY_ID table. I
noticed that a row does get inserted later, when I restart WLPS.
If I want to get the ID of the group using RealmLink.getGroupId()
method, I always get back -1. I suspect it is because that the group is
not in the entity table, but am not sure.
I need the group ID because I want to add the group to a portal using
PortalManager.addGroupToPortal, and currently this method is throwing a
finder exception.
Am I missing any steps?
Thanks,
JP

I have the same problem. I have two iphone4 on my account. I turned off reminders under iCloud on one phone so both phones wouldn't get each others Reminders. On the phone with Reminders turned off, there is no + sign. On the phone with Reminders turned on everything is fine.

Is there any education available for the use of Firefox for a non techie?

I have used Firefox for several years now but I am not very tech-savvy. Many of the points in your promotions and releases don't mean much to me and I feel I may be missing out on some useful tools or features. Is there any education or manual guidance on Firefox and how to use it. How would you suggest that I address this?

Hi philcoa,
You should check out the [http://www.mozilla.org/en-US/firefox/features/ features page] for a quick rundown of all the Firefox has to offer. If there is anything on the features page that you are interested in learning more about, you should try searching for that feature in the [https://support.mozilla.com/en-US/home Knowledge Base]. They have articles that cover pretty much every aspect of Firefox. Like this [https://support.mozilla.com/en-US/kb/getting-started-firefox Getting Started with Firefox] page.
I'll do some digging to see if there are any other articles that might help you.

Is there any way to undo the "Use this Mailbox for" action besides the undo action

My Gmail account in Mac mail was confusing me so I set the Gmail folders to be used for certain things (i.e. Drafts, Sent, Junk, Trash), but now I'd like to set it back. I can't use undo because it was a while ago. How should I go about doing this?

This is the action that I'm talking about. I set certain Gmail folders to be used for these 4 options. I would like to release those folders from their respective duties.

Is there any way to disable the use of the "Delete" key to delete an email message?

It's very frustrating when I hit the delete key and iCloud automatically erases the selected email message. I receive some HTML formatted emails that include a text box that I can utilize to directly reply to something. If I don't make any mistakes at all, I can utilize this box and post a reply. But if I mess up and need to delete text, instead of deleting text iCloud deletes the email message. Is there any way to disable this?
Thanks for your help.

I don't believe it's possible to disable the delete key, but could be wrong. However, if you delete an email in error, you can restore it by pressing cmd + Z to undo the deletion.

Is there a log entry indicating the use of battery backup?

Similar Messages

Maybe you are looking for