Is there a log-file to wich log the calls auf programms?

Hi,
I have to know the last date when our z*-programs were startet/called!
Did anybody know a adequat transaction or table?
Thanks for help!

transaction STAT

Similar Messages

  • If we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3. kindly suggest

    if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!

    Hello kumar kalptaru, 
    Thank you for participating in the Apple Support Communities. 
    It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button. 
    Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
    While on a call - iPhone
    End a call. Tap  or press the Sleep/Wake button.
    Best Regards,
    Jeremy 

  • Is there a way to delete information like the call log on voice, the text messages on text, the IM Messages on IM as well as the INternet history, etc. with one command?

    If I want to lay my phone down and I want NO ONE to know about any past activity is there a way to clean it ALL out at once so I am sure that my activities will not be discovered?

    Is this for a smart phone? You can hard reset the device back to its factory configuration, but of course then you have to spend a lot of time setting it up again. There might be an application for clearing the information you want to clear, but it would be specific to your device (and you might have to root/jailbreak your device to gain full control of it). You might try posting your question on a forum dedicated to your device's operating system, such as Android Central or the iPhone Blog.

  • Why is there an old file name next to the search icon on all my pop up windows?

    Parade Dental is an old project file which has now been deleted but for some reason it appears here. How do I get rid of it?

    You can actually store (aliases to) files, servers, etc. up there in the menubar.
    You may have inadvertently dragged it there once.
    If the item is no longer available, you get the question mark.
    Press the command key and drag that thing off of there.
    charlie

  • Is there any config file to maintain/change the frequncy for polling adapte

    Hi,
    I am aware that in unix there is a way to schedule any job using several utilities like crontab.
    Similar to it is there any way to maintain the frequency of the polling adapters ( database or file )
    We should be able to change the frequency of polling ?
    Regards

    Hi ,
    I agree that we have option to set the frequency for polling adapters (DB/file), please allow me to explain the question
    Option to set frequncy is available at the time of development and is fixed (hardcoded) in BPEL.
    In a scneario where we have 100 such polling adapters , if I need to change frequency for say 10 of them .
    is there any way to change the frequency without redeploying the BPEL.
    Regards

  • I followed the instructions to import my favorites from Explorer, but there is not file for Explorer under the Bookmark tab.

    I followed the instructions to import my favorites from Explorer, but there is no Explorer file under the Bookmarks tab. How do I get my favorites imported?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

  • Since re booting and installing FF there is no file / tools / help at the head of the page.

    I recently re booted and when installing Firefox back onto my computer, since then the file - tools - help bar at the top of my homepage is not present.
    How do I restore this as I have tried this and upgraded to Firefox 4 and this feature is still missing ?.

    I had the same thing happen. right click on the little house (Home) icon, and select Menu Bar. That should restore it.

  • Why isn't there a "Get Files from Zip" on the zip pallette in 8.0?

    The zip pallette has three functions.  New Zip File, Add File to Zip, and Close Zip File.  I cannot figure why they would not include a way of extracting files from an existing zip. 
    All three have password protected block diagrams, so I cannot go monkeying around on my own.  Anyone have any ideas?

    The OpenG add-on LabVIEW library (which uses zlib) will do all that you ask and more.
    The installation process uses something called OpenG Commander and, while it can be a bit confusing, it is more than worth the trouble in the end!

  • Gatekeeper Accounting: Logging the IP addresses

    Hi,
    I am using a Cisco 7200 as a gatekeeper and I have setup a RADIUS server to log the calls. The problem is that the gatekeeper is not logging the IP ADDRESSes of the gateways (even for gateways registered to its local zone). It just logs the H323-ID of the gateways belonging to the local zone. Although you can see the IP address of the gateways in the "show gatekeeper calls" command ouput.
    Is there anyway I could configure the gatekeeper to log the IP address of the gateways. Is this done through the GK API? If yes, could anyone explain or give me an example?
    Thanks,
    Hamid

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

  • When I try to take photos off my ipad it says there are no files

    I'm trying to take the photos off of my ipad and put them onto my pc that is running on windows 7.
    When I connect my ipad to my laptop it shows it as a camera device but when I click internal storage and then the DCIM folder there are no photos there.
    I also tried right clicking on my ipad and clicking import pictures and videos but it says there are 0 files.
    All of the photos have been taken on my ipad and are definetly there.
    Help?

    I'm In the same situation.
    sms does not appear to work in the UK

  • Firefox is preventing some files from downloading off the internet

    Today I had to go to the Dell website to update some drivers for my laptop. Every time I downloaded the driver file from the site to the download manager and then clicked on it to run, I would get a message that there was no file to download. The tech from Dell then had me download Google Chrome and the downloads went smoothly without a hitch. Something in Firefox is preventing the Dell files from downloading. I need instruction on how to correct this problem. I am also wondering why when I go to download files using firefox I do not get an option to run the file instead of save it. II only get the option to save it and then have to click on it from the download manager to run it. I would like to change this as well if possible
    Thanks,
    Maria

    It is possible that you run into this maximum (the default value is 20):
    * http://kb.mozillazine.org/dom.popup_maximum
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • Is there a log of files/folders deleted from server?

    Is there a log of files/folders deleted from our server that I can look at?

    Hi again Christiaan, I'd be wary of upgrading your server just for this feature. This article mentions the pitfalls of the different server setups, loss of server preferences when upgrading etc...
    The benefits of having file and folder creation/deletion logged could be easily outweighed by the loss of auto setup of users mail and the other features that 'just work' in a standard install.
    Cheers

  • Is there a log file of my last shutdown?

    I wanted to see what the steps are when Arch shuts down on my system.  Is there a log file that records these that I can look at when I next reboot?  Does it also report any shutdown errors?

    $ last

  • Is there a way to use the built-in Datalogging and programmatically log the front panel while the vi is running?

    I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that. Currently, I am grabbing all of the front panel control references using VI Server and if there are any changes, the changed values are written to a log file along with a date/time stamp. I'm mostly dealing with buttons, which simply change from 0 to 1 or 1 to 0, so it's not too hard to visualize what was pressed. It works okay for reconstructing what happened, but it would be much nicer to use the built-in fe
    ature because you can "replay" directly onto the front panel and actually see what the changes were. However, without being able to programmatically make a new log, it won't work for me.

    Jake,
    There are several options here.
    I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
    If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
    I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
    Good luck

  • Logging the information from multiple tables to a txt file

    To All,
    I am working in a bench test set in which I test different devices via serial. For each of them, I have a log table. Is there a way I could log all those tables in a singe text file? 
    Thank you,
    Cosmica 
    Solved!
    Go to Solution.

    Hey cosmica,
    Yea as Smercurio said, you can use the file I/O VIs to do your task. The advantage of the write to spreadsheet file VIis that you can set the delimiter (the character that separates data points in the same row) as a tab. This means that even if you don't open the file with a spreadsheet program like excel then notepad could still be used to open your file. Regardless of the extention that you choose to save your spreadsheet as, Excel can import it. You just select which delimiter you chose when you created the file (I recommended tab).
    Please let us know how this worked out for you.
    Message Edited by rex1030 on 05-14-2009 02:28 PM
    [will work for kudos]

Maybe you are looking for

  • Problems with Target service agreement

    Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

  • Change of risk category for a customer

    Hi all, i made a change to the risk category of the existing customer, but my sales order created earlier, in change mode for qty or value reacts in different on the credit management perspective, it does not react specific to the old risk category n

  • Add form fields dynamically onchange of a select box.

    I have a JSP page with a <h:form>: <h:form id="registrationForm">      <h:outputText value="#{Resource.EmailAddress}" /><br />      <h:inputText label="E-mail Address" id="emailAddress" value="#{RegistrationBean.emailAddress}" required="true" require

  • Adding Text

    Can anyone help me out on adding text to an image. I have followed the instructions in both books and videos on how to add text (using the text tool) and when I get to the point of typing text in, it doesn't go 'in'. The box that I assume it should s

  • Locale (date format) not working

    In my preferences I set Language: English, Locale: Malta and there it shows: Sample Date: 09 Sep 2013 16:28 But when reading the forum all (or most) dates and times are shown in 12 hour format: 2:44 PM. For example the post dates of messages. Is this