Is there a log to register a change user quota ?

Hi, 
I would like to know if there´s a specific log or event to verify with someone changed the user quota from a specific user.
Or with there´s an ID on eventviewer to check it 
I have an user that for some reason I change the quota and a few days later the quota come back to the old quota. 
Thanks 

It should be in Admin Audit Log if any admin has changed it...
Admin Audit log is by default enabled when you install Exchange and keeps 90 days of data (unless someone changed it)
Administrator Audit Logging
Blog |
Get Your Exchange Powershell Tip of the Day from here

Similar Messages

  • Is there any way to register for changes in a NetworkInterface?

    Greetings. I'm interested to know if there's a way to register for changes to a NetworkInterface. Changes could include ifup/ifdown, a change in the displayable name, adding/removing InterfaceAddress or InetAddress, or even a change in the hardware address. It doesn't look like it but I thought I'd check.
    Thanks. Jerry.

    The latest version of software for your iPod is shown in the iPod's Summary screen in iTunes.  If an update is available, notification will be there.  If it says "Your iPod software is up to date," you have the latest software.

  • How to track log for FR reports changes done in Workspace

    Hello,
    How can i track if a particular FR report or a folder is being updated or deleted from workspace or FR STUDIO ?
    Is there any log file which can give me the details of the username who accessed which report or who made any changes to any particular report ?
    I have checked the log files under Hyperion_home/logs/BI Plus and logs under BI Plus/logs filder but could not find anything fruitfull .
    Please suggest.
    Thanks
    Jiten

    Hello Experts,
    Please help me out in this.
    Thanks
    Jiten

  • Getting Error while deploying the autohosted event receiver in office 365 ( ErrorDetail: There was a problem registering the app principal.):

    Hi,
    I was successfully able to deploy my auto hosted event receiver in office 365 and it was working. I did some changes on code and try to deploy it again but now it through same error always wheneven i deploy it.
     CorrelationId: 2ef8a311-f1cf-4ee7-be1a-1125c5231e1c
    2>        ErrorDetail: There was a problem registering the app principal.
    2>        ErrorType: Configuration
    2>        ErrorTypeName: Configuration
    2>        ExceptionMessage: An error occurred while attempting to execute a principal management operation.  Please contact your administrator.
    2>        Source: RemoteWebSite
    2>        SourceName: Remote Web Site Deployment
    2>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    Please help me on this. Not sure what this error is indicating.
    Regards:
    Sanjay Joshi

    Hi All,
    I have tried same thing in different different environment.  Different environment mean different azure account and office 365 account. But still the issue persists.
    i feel some issue in my office network or in servers. Because couple of days back same thing was working in my private virtual machine in my private network instead of office.
    For me i observe a basic problem in this network.
    The pop up to provide trust to the app (that come with title "Grant permission to app") comes while i deploy the solution and gets close automatically without clicking trust.
    Might be this could be the reason for me ?. because closing of pop up is not providing authentication to my app.
    This happens in every server in my office network.
    Any suggestions on that. Thanks in advance.
    Regards:
    Sanjay Joshi

  • With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?

    With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
    For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
    I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
    I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
    Thanks
    Roz

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • Logs for 'Operating mode' change in mirroring

    Logs for 'Operating mode' change in mirroring
    Hi Everyone,
    Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
    Regards,
    Aspet
    A.G

    Try looking into trace log files
    DECLARE @filename VARCHAR(100), @filenum int
    SELECT @filename = CAST(value AS VARCHAR(100))
    FROM fn_trace_getinfo(DEFAULT)
    WHERE property = 2
      AND traceid = 1
      AND value IS NOT NULL
    SELECT @filename
    SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
    SELECT @filename
    SELECT gt.EventClass, 
           te.Name AS EventName,  
           gt.TEXTData, 
           gt.NTUserName, 
           gt.NTDomainName, 
           gt.HostName, 
           gt.ApplicationName, 
           gt.LoginName, 
           gt.SPID, 
           gt.StartTime, 
           gt.EndTime, 
           gt.ObjectName, 
           gt.DatabaseName, 
           gt.FileName 
    FROM [fn_trace_gettable](@fileName, DEFAULT) gt 
    JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id 
    WHERE EventClass = 116 
      AND TEXTData LIKE '%Alter
    database%' 
    ORDER BY StartTime; 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Blog:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance

  • There are no readers registered for the sql type.

    SQL Developer 4.0
    I added .sql and .ldr as file types via Tools > Preferences > File Types.
    When I try to open the export.sql file in SQL Developer using the "Import Data" option I get the message:
    There are no readers registered for the sql type.
    I can open the file with SQL Server Management Studio and see all of the insert statements that i would expect to see.
    When I created the export.sql file using the Export Wizard with "Format: insert" I received a message:
    "export.sql was not opened because it exceeds the maximum automatic open size."
    Can this limit be changed?

    The import data dialog is for taking a CSV/XLS/TXT type file.
    If you used the Export Wizard, you can now just run that file in the worksheet.

  • [svn:fx-trunk] 11810: Fixing up some logic around pauseWhenHidden ( there were some bugs) and also changing some logic around enabling/ disabling.

    Revision: 11810
    Revision: 11810
    Author:   [email protected]
    Date:     2009-11-13 17:07:56 -0800 (Fri, 13 Nov 2009)
    Log Message:
    Fixing up some logic around pauseWhenHidden (there were some bugs) and also changing some logic around enabling/disabling.  Also fixing a small documentation bug on VideoPlayer2.scaleMode.
    When a video component (or one of its ancestors) becomes disabled, the video pauses.  When it becomes re-enabled, we do not play the video.  This behavior is baked in to VideoDisplay and does not depend on the pauseWhenHidden flag.
    QE notes: -
    Doc notes: -
    Bugs: SDK-24182, SDK-24181, SDK-24193
    Reviewer: Kevin
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24182
        http://bugs.adobe.com/jira/browse/SDK-24181
        http://bugs.adobe.com/jira/browse/SDK-24193
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoDisplay.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as

    Thanks Erik,
    If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
    As an aside....
    I recall how all the 'naysayers' prior to LPX (and in some cases, since...)  were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

  • Oracle standby/redo log file shipping keeps needing logs re-registering

    Hi
    We have Log File Shipping enabled and the prod system ships redo logs over to the LFS server. It's kept 24 hours behind. It usually ships the logs (and I believe automatically registers them) without issue.
    EXCEPT - it keeps complaining about missing redo log files.
    The file is usually there; but just needs registering with:
    alter database register or replace logfile '/oracle/S1P/saparch/S1Parch1_636443_654987192.dbf';
    (we found if we left out the 'or replace' it takes a very long time or even hangs)
    It then plods on and applies the next... can go for another 2 or 3... or 20... but then often gets stuck again, and you need to register the next.
    Can spend whole days on this...!!
    We did try running a script to register the next 1365 redo logs! It failed on 4, so I ran it again... it worked on those 4, but turned up 3 others it had worked with before! HUH?!? So manually did those 3 ... fine... it carried on rolling forward... but got stuck after 10 minutes again when it hit another it reckoned needed registering (we'd already done it twice!!).
    Any ideas?
    Ross

    Hi
    We have Log File Shipping enabled and the prod system ships redo logs over to the LFS server. It's kept 24 hours behind. It usually ships the logs (and I believe automatically registers them) without issue.
    EXCEPT - it keeps complaining about missing redo log files.
    The file is usually there; but just needs registering with:
    alter database register or replace logfile '/oracle/S1P/saparch/S1Parch1_636443_654987192.dbf';
    (we found if we left out the 'or replace' it takes a very long time or even hangs)
    It then plods on and applies the next... can go for another 2 or 3... or 20... but then often gets stuck again, and you need to register the next.
    Can spend whole days on this...!!
    We did try running a script to register the next 1365 redo logs! It failed on 4, so I ran it again... it worked on those 4, but turned up 3 others it had worked with before! HUH?!? So manually did those 3 ... fine... it carried on rolling forward... but got stuck after 10 minutes again when it hit another it reckoned needed registering (we'd already done it twice!!).
    Any ideas?
    Ross

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • CCMP logs path for Supervisor changes

    Hi All,
    Using UCCE and CCMP, recently we observed end users(agents) being moved from one team to another, and found that this can be done by a user with Supervisory rights through CCMP web pages.
    Is there a log/trace i can check to see which supervisor made the changes?
    Do let me know what other information is needed.
    Regards
    Kunal

    Hi Richard,
    In my lab in UCCX 8.5 I can see this in the agent logs. I have them enabled to debug mode,
    Open the Agent.cfg file on the agent computer in the directory C:\Program Files\Cisco\Desktop\Config
    1. Change the debug THRESHOLD from OFF to DEBUG
    [Debug Log]
    Path=..\log\agent.dbg
    Size=3000000
    THRESHOLD=DEBUG
    You will see some files with dbg extension being generated in
    C:\Program Files\Cisco\Desktop\log
    Now when the supervisor attempts a change in an agent state you will see something like this
    2012-01-23 22:38:42:373 DEBUG [0x1ec] FCC_Client_impl.cpp[800] FCC_Client_impl::genericMessage: Begin. destType: Agent, destID: , senderUserType: Supervisor, senderId: , messageType: 0.
    and a little bit further down I see this
    2012-01-23 22:38:42:373 DEBUG [0x14c] AgentStateManager.cpp[1021] CAgentStateManager::OnReceiveChatMessage: ASM1021 Received request from supervisor to change state to AS_READY
    So normally you should be able to see the same in the agent logs in UCCX 7.0
    HTH,
    Christos
    2012-01-23 22:38:42:373 DEBUG [0x14c] AgentStateManager.cpp[1021] CAgentStateManager::OnReceiveChatMessage: ASM1021 Received request from supervisor to change state to AS_READY

  • I recently got my moms friend old iphone5 that he had for like a month. Everything is fine with it but it wont let me update any of my apps because it asks for his apple ID password. Is there anything i can do to change/fix that?

    I recently got my moms friends old iphone5 that he had for like a month. Everything is fine with it but it wont let me update any of my apps because it asks for his apple ID password. Is there anything i can do to change/fix that?

    sabrinabriii wrote:
    I recently got my moms friends old iphone5 that he had for like a month. Everything is fine with it but it wont let me update any of my apps because it asks for his apple ID password. Is there anything i can do to change/fix that?
    You should remove his AppleID and restore it as new.

  • I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

    I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

  • Is there any way to change user operations on multiple tracks at once?

    I have a complex project (99 tracks, dozens of menus and scripts). I need to make one version of this DVD for the end client (teenagers at health clinics) who will be forced to view it in a specified way, and another version for educators (staff at the clinics) who will be allowed to fast-forward and have access to a menu from which they can jump to different points in the DVD.
    I have different menus to serve as "first play" for these different versions so that I can easily switch between versions when burning disc images, and I have set up GPRMs to make navigation different for the two versions automatically. My problem now is that I want to disable forward scan, next program, root menu, and title menu for the client version. As far as I can tell, I have to do that independently for every single track and menu. Bleah. This is especially annoying since the DVD is still in development, so I am continuing to change small things and will need to keep both versions up to date as I do.
    Is there any way to select multiple tracks/menus and change user operations on all of them? Or any other work-around or script that could do it? I thought this would be a perfect task for the automator, but I'm not very familiar with that application and don't know how (or if it's possible) to create new actions other than the ones that are available.
    Any ideas?
    thanks!
    Julie

    Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

  • Is there any way that I can change ownership (not authorization) of a song so that I don't have to go between my parent's family account and my new account?

    So a little backstory i joined the army and get to go home and use the account where the majority of my music is very little, but now when i try transferring these songs to a new device some of them aren't authorized, and I don't want to go through this every time i get a new computer or ipod/iphone.  Is there any way that i can change ownership of a song or other file so that a different account is the one to authorize its use?

    No.
    tt2

Maybe you are looking for