Is there a maker.ini command to change extendscript default startup directory?

Hi All,
Rather than use <framemaker install dir>\startup, I want to use c:\deploy - for storing all my required startup extendscripts and dlls.
Can I do this, if so, how?
Thanks!
Tracey

Hi Jörg,
hmmm. I'd guess there are some problem with for which user the environment variables have been defined...
Anyhow, usually it's easier not to use the environment variables but to provide the dbm-server it's own runtime variables via dbm_configset.
Check the old thread archive_stage and archive_stage_repeat to different NSR_POOLs for an example application of this.
regards,
Lars

Similar Messages

Changing the Default Save Directory in Acrobat

I am currently working with multiple systems, some using Acrobat 7.0 and some using 6.0.
Basically, I am wondering if in either of these versions of Acrobat it is possible to change the default save directory to something other than 'My Documents.' Acrobat will remember the last directory I saved to if I have already saved to that location once in a given session, but if I exit the program and then enter it again, it defaults back to 'My Documents' instead of the last place I saved.
Is there a way to set the default directory in 6.0 and/or 7.0?

No. Put a short cut to where you want to go in the My Documents folder and you are only 1 step away.

How can I change the default EXPORT directory for latest iPhoto?

Perhaps I am missing something, but I have as yet to find a way to set my default EXPORT directory. Since installing Lion and the iPhoto update, whenever I want to export it wants to put the image in 'Pictures', but I want 'Desktop' generally or somewhere else.
I am all set with library and import location. In fact, Import is smart enough to remember where I import my stuff FROM - namely, the desktop.
But once I have edited files and want to export them, the default jumps back to Pictures.
Again, this is NEW and CHANGED behavior with the latest release to coincide with iOS 5 ...
I just want it to remember my default from export to export ... heck, it even changes within the same session!

I can certainly confirm the behaviour and have no solution to it.
That said, in the export dialogue typing command-d will point the export to the desktop.
Regards
TD

Installation question - Changing the default installation directory

Is there a way during a silent install to change the default installation path from c:\hyperion? For instance I would like it to install to c:\program files (x86)\Hyperion by default with no user interaction required.

Not sure what you are trying to install but personally I would steer away from using directories with spaces in
Cheers
John
http://john-goodwin.blogspot.com/

HT4946 Can we change the default backup directory for iPhones in iTunes ? My C:\ drive is FULL due to the 64 GB backup that I just tried to do... I have an external that would handle it.

Finally! After jumping thru 15,000 hoops I finally get to ask my question!
I have a 40 GB main drive that is full to bursting on account of iTunes backing up my iPhone to it [64 GB iPhone]. All I ever intended to put on this drive was my OS [Win XP], then all sorts of programs that I chose to install started defaulting to it without the option of changing the drive designation. Enter Apple, who does the same thing and then offers no clear way to change it! GRRRRRR!
Can someone please find an easy way for me to back this thing up without selling a kidney to afford the iCloud [which I rashly assumed was free according to the advertising! 5 GB wouldn't back up my notes let alone my apps or photos! The Cloud should match the size of device you purchase!]
Thanks,
Dave

What computer do you have?
What operating system is it running?
Allan

[SOLVED] Changing the default startup font

I've been trying to do this for ages, but I've never been able to find any concrete details as to how to do this. I'd like to set the start up font so that it looks like the one used in like Debian, Ubuntu, and other distros, instead of the bitmap font that I currently have set as the terminal font.
Last edited by lspci (2013-02-12 08:14:05)

It works ...sort of...
It does indeed set up the startup font to be the desired font in question, but systemd keeps changing it back everytime it hits the
[Starting Virtual Console] part.
I tried figuring out how to get Systemd to stop setting the font, and currently I'm wondering whether commeting out
FONT=Lat2-Terminus16
part in vconsole.conf now that mkinitcpio has loaded it into the boot image thing--or at least I assume that's what it's done--might help, not sure though--in fact doing that may be a very bad idea...
Okay, so get this. Setting the console font using mkinitcpio works with Sysvinit, but doesn't work with Sysvcompat. Sysvcompat changes the font back to the original setting when it hits the
[ OK ] Setup Virtual Console
[ OK ] Reached Sound Target
part
EDIT-SOLUTION:
As it turns out the default font can be set for the current tty using a homebrew service file.
Here's the one I use:
# /etc/systemd/system/default.target.wants/vconf.service
[Unit]
Description=vconf
# Virtual Console Font sets the console font to whatever font you specify.
# setfont Lat2-Terminus16 -> Debian, I believe.
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/setfont Lat2-Terminus16
[Install]
WantedBy=default.target
Last edited by lspci (2013-02-12 08:12:15)

Is there an about:config option to change FF's default action when closing a tab so that it displays the previous tab rather than the next tab?

With the new 3.6 tabbing behaviour (new tabs open to the right of the current tab, rather than at the end of the tab list), the old default behaviour when a tab is closed is no longer appropriate. Instead of displaying the next tab after the one that was closed, FF should display the previous one. Is there an about:config option to change the default behaviour upon closing a tab?

Try one of these:
*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122
*Tab Control: https://addons.mozilla.org/firefox/addon/1480

Changing Default Project Directory

Does anyone know how to change the default project directory?
I can move events; that's no problem.
But I can't seem to move the default project directory off my main MacBook Pro drive.
Thanks.

I ran into this issue and found a work-around for it.
The problem is that OS X Finder Aliases work a little differently than UNIX links. A UNIX link will do what we need it to do because it is lower-level in the operating system (not a Finder trick), but if you cross physical disk boundaries you then need to then use a "symbolic link."
If you know how to make a sym-link, then you should be good to go -- if not, there are directions below.
To do this [you should have some UNIX command-line familiarity]:
In the Finder, copy your Projects or Movies folder to the drive/destination where you want it.
When the copy is complete, rename the original folder (I copied my whole Movies folder and renamed the old one "Movies2").
Open Terminal (~Applications/Utilities/Terminal) -- it should put you in your home directory.
You will now want to figure out what the UNIX path to your new projects or movies folder is. Get Info in the finder on your new folder, and note the "Where:" field -- as you will need to type this by hand.
You create a UNIX symbolic link by typing the link command, followed by the symbolic-link flag (-s) then the source directory (your new folder) and the target for the link (where you want it to point FROM), from your home folder.
I moved my Movies folder to a disk that I called "500GB" so I wanted the Movies folder to point TO the Movies folder on the disk called "500GB".
To create the symbolic link, with the Terminal program, and my current directory as my home folder, I typed:
ln -s /Volumes/500GB/Movies ./
And that created a "Movies" symbolic link in my home folder that points to "/Volumes/500GB/Movies"
iMovie'08 now works with the relocated projects, etc.
Once you are done with this, launch iMovie and make sure that it is doing what you need it to do. If it is not, you still have the original Movies or Projects directory that you started with. If it is working, then you can backup and/or discard the safety backup you made when you renamed the original folder (i.e. "Movies2").

I work with a web app that will not run on Firefox, so I changed my default browser back to IE but the URL link continues to open in Firefox. How can I get it to default to IE?

After changing my default browser from Firefox back to IE, other URLs are defaulting to IE but I have one URL that continues to default to Firefox. This web app will only run in IE so the only way I can run it is to open IE first and then enter or select the URL. Is there a setting someplace that will change the default browser for this URL to be IE?

You can make IE the default browser, that will reset some registry keys 
Control Panel > Internet Options: Programs 
Put a check in the box next to 'Internet Explorer should check to see whether it is the default browser' 
Start IE and let IE make itself the default browser.
Check the default settings in: 
Control Panel > Add/Remove Programs > "Set Program Access And Defaults" (on the left) 
Open: Custom (click arrow on the right) 
Select "Internet Explorer" under "Choose a default Web Browser" 
Click OK

Changing the default to location of Archiver data

Hi,
Is there any way that we can change the default location of the Archiver data. By default is goes to archives folder, i want it to goto some other folder.
Similarly when u take up the backup of site. i want it also to be stored in some other folder.
is it possible.???

For archiver see My Oracle Support Note
How can I move the archive directory? (Doc ID 449054.1)
Not sure what you mean by a back up. There is no built in Disaster recovery tool for UCM. Standard system back ups (file system and DB) for restore should be used.

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

How do I change the default Windows Quicktime transport preferences to HTTP?

Is there a way that I can change the default transport settings of Windows Quicktime preferences panel to use HTTP?

launch indesign--open and position the panels you want--then go to the workspace menu and save your workspace--then, when you launch Indesign it will appear like your saved workspace
see these articles:
http://www.tech4pub.com/2012/10/24/indesign-cs5-5-tip-work-efficiently-with-custom-workspa ces/
http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6d6ea.h tml#WSa285fff53dea4f8617383751001ea8cb3f-6d6ca

Change the Default Gap Length?

Is there a way in X to change the default gap length from 3 seconds to some other length?
(Yes, I know I can change it within the project via Control+D).
I'm talking about the Default. (Like could be done in 7).

No.

Changing default archive directory

Hi
I want to change the default archive directory.(which is log_archive_dest ).
Which one should I use?
ALTER SYSTEM SET log_archive_dest_1='location=/u01/oradata/MYSID/archive/'
or
ALTER SYSTEM SET log_archive_dest='location=/u01/oradata/MYSID/archive/'
SQL> show parameter log_archive_dest ;
log_archive_dest /ora_archive/
log_archive_dest1
log_archive_dest2
*.*

log_archive_dest_<n> and log_archive_dest can not BOTH be set.
log_archive_dest doesn't support the LOCATION= syntax.
Sybrand Bakker
Senior Oracle DBA

Is there a maker.ini command to change extendscript default startup directory?

Similar Messages

Maybe you are looking for