Is there a merge module for HHActiveX.dll

I told the developer who creates our install images that we
needed to install and register HHActiveX.dll because we are using
the glossary in our RoboHTML help project. He asked if there was a
merge module available for this dll which will allow us to be "well
behaved windows developers" by allowing us to remove it when we
uninstall without affecting other applications that have installed
and registered it. He said that it should be created by Adobe and
is a .msm file that effectively gives the dll a generic install ID
so that the system knows that it is used by multiple programs. I've
looked around the Adobe support site and through the knowledge base
and have not found anything listed. Does anyone know if this is
available?

Thanks John, that is kind of what we are noticing. We thought
we may have to handle it ourselves but that sure leaves the
potential of messing up someone elses help implementation upon
uninstall or them messing up ours upon uninstall of their
product.

Similar Messages

Merge Module for Crystal 10 SP6?

Post Author: dewy
CA Forum: Deployment
We are currently using the merge module for Crystal 10 from 05/10/2006 in our InstallShield project. We're experiencing problems that appear to have been resolved in the newest SP6 -- however it doesn't look like the merge module has been updated in quite some time.
Is there going to be a merge module created for SP6?
If not, should we continue to use this merge module and install SP6 on top of it?

Post Author: marciocallejon
CA Forum: Deployment
I dewy,
I've been the same problem, but using the Crystal Reports 9.0 and SP7, the merge modules are out of date...
fyi,Marcio

Merge modules for report viewer only - can you help today?

Hi all,
We are using Crystal 2008, VS 2008, and have an C# application that is using the Crystal reportviewer control to render a report generated server side.
We need the Crystal 2008 reportviewer control, not the 10.5 version that is currently referenced in the studio. For development purposes, we can install the Crystal 2008 msm.
But here's my question.......
For our client side install, is there a merge module/msi that will give me just the controls I need instead of using the (larger) merge module/msi from the site?
We need to get our build done within the next day. Any help in answering this question would be greatly appreciated. If you can just let us know whether there is any other way than the full msm, that would be very helpful.
Thanks so much......

Hi,
We need the Crystal 2008 reportviewer control, not the 10.5 version that is currently referenced in the studio. For development purposes, we can install the Crystal 2008 msm.
For development purpose the CR 2008 must get integrated with VS 2008, also all the correct references should be referenced.
- How to integrate
First Install IIS
then VS 2008
then CR 2008
How to check that CR get integrated with VS or not -
Open VS environment go to help about - there you will see the version of CR integrated.
Note:- VS 2008 is compatible with CR 2008 SP0/SP1
For our client side install, is there a merge module/msi that will give me just the controls I need instead of using the (larger) merge module/msi from the site?.
You must have installed the runtimes to run CR on the machine where CR complete product is not installed, Hence the system must have merge modules or server install.
Hope this helps!!
Regards,
Amit
Edited by: Amit Singh on May 6, 2009 5:48 PM

Is there any function module for getting distribution list name

Hi all,
Is there any function module for getting distribution list name when there is same description for two distribution list name.
or
help me how to fetch the correct distribution name when there is same description.
In order to send mails.
Tell me ASAP.
thanks
sagar.

http://www.sapbrainsonline.com/REFERENCES/FunctionModules/SAP_function_modules_list.html
list of Fms

Is there any function module for purchase order change

Hi Experts,
Is there any function module for purchase order change or i need to do new recording in me22n.
Thanks,
Senthil

Hi
Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind transaction ME22N.
Regards,
Viven

Merge modules for Business Objects XI service pack 4

I am in the process of developing a deployment package in Installshield 2009 - Basic MSI Project. I tried adding the merge modules I downloaded earlier from the web page, http://support.businessobjects.com/downloads/runtime.asp
Currently I do not see this web page. It would be nice if you could tell me whether do we have a merge module for Crystal Reports XI service pack 4. If we have where from i can download them. Thank you

Thanks a lot for the immediate response. However, I am not using the crystal reports Version, R2 release.
I had actually installed Business Object XI and applied service pack 4 on it. I checked the version in Help->About. It is 11.0.0.
Also my environment is XP Sp2, Visual studio 2003 and Visual studio 6.0. I understand that R2 release is needed if the environment is Visual Studio 2005.
I would like to give a clear picture of the issue I work through.
After deploying the software in the client machine, I came to know that when client tried to print the embedded crystal report (.dsr file) from CrViewer,
1. Page set-up dialog bog gets displayed.
2. After clicking 'OK' button in the page set-up dialog box, nothing happens. It is suppose to bring print dialog.
I simulated this in my development machine (confirmed that Print dialog is is not getting displayed when 'OK' button is clicked from 'Page setup' dialog)
I researched and found out from some web page that if Business Objects XI is updated to Service pack 4, this issue gets resolved
So i applied service pack 4 in my dev. machine and tested the functionality by clicking 'OK' button. This issue is no more.
Next logical step is to propagate the sp4 changes to the installer. I searched for the merge modules corresponding to Business Objects XI - service pack 4. I could not locate it now.
I searched my backup folder, I located some previously downloaded merge modules downloaded from the web page, http://support.businessobjects.com/downloads/runtime.asp
I tried to include these merge modules and received an error message "Internal build error" . My research revealed that inclusion of the merge module, CrystalReports11_RDC_Reportengine.msm (43,306 Kb, 7/4/2007) throws "Internal build error" during compilation of MSI project in Installshield 2009.
Any idea, tips and help to resolve the issue would be appreciated. Thank you.

Where To Find Merge Module for 8.5

I am trying to rebuild an installer package for an old vb6 project and cannot seem to find the merge module for crystal 8.5. I've looked in the download section here and see lots of stuff for 8.5 but no merge module. Is it packaged in one of the available downloads files?

See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsReportDesignerComponentRuntimeDistribution-Versionspre8.0.xto12.0] wiki:
Ludek

Hi is there any function module for radix conversion

Hi,
I need to convert number of base 36 to decimal number. Is there any function module for that.
i.e) z to 35
 10 to 36
 11 t0 37

Hai,
This program perfectly converts a number from one number system to another number system.
REPORT Z_RADIX_CONVERSION.
PARAMETERS:
P_S_RAD(2) TYPE N, " Source Radix
P_D_RAD(2) TYPE N, " Destination Radix
P_S_NUM(5) TYPE C. " Source Number
*" Data declarations...................................................
Work variables *
DATA:
W_LEN TYPE I,
W_FACT TYPE I,
W_D_NUM(5) TYPE N,
W_T_LEN TYPE I,
W_NUM TYPE C,
W_NUM1 TYPE I,
W_REM TYPE I,
W_INDEX TYPE I VALUE 20,
W_T_NUM(30) TYPE C,
W_T_NUMBER(5) TYPE N.
IF P_S_RAD GE 1 AND
 P_S_RAD LE 16 AND
 P_D_RAD GE 1 AND
 P_D_RAD LE 16.
IF P_S_RAD EQ 01 AND P_S_NUM CO '0 ' OR
 P_S_RAD EQ 02 AND P_S_NUM CO '01 ' OR
 P_S_RAD EQ 03 AND P_S_NUM CO '012 ' OR
 P_S_RAD EQ 04 AND P_S_NUM CO '0123 ' OR
 P_S_RAD EQ 05 AND P_S_NUM CO '01234 ' OR
 P_S_RAD EQ 06 AND P_S_NUM CO '012345 ' OR
 P_S_RAD EQ 07 AND P_S_NUM CO '0123456 ' OR
 P_S_RAD EQ 08 AND P_S_NUM CO '01234567 ' OR
 P_S_RAD EQ 09 AND P_S_NUM CO '012345678 ' OR
 P_S_RAD EQ 10 AND P_S_NUM CO '0123456789 ' OR
 P_S_RAD EQ 11 AND P_S_NUM CO '0123456789A ' OR
 P_S_RAD EQ 12 AND P_S_NUM CO '0123456789AB ' OR
 P_S_RAD EQ 13 AND P_S_NUM CO '0123456789ABC ' OR
 P_S_RAD EQ 14 AND P_S_NUM CO '0123456789ABCD ' OR
 P_S_RAD EQ 15 AND P_S_NUM CO '0123456789ABCDE ' OR
 P_S_RAD EQ 16 AND P_S_NUM CO '00123456789ABCDEF ' .
 W_LEN = STRLEN( P_S_NUM ).
 W_T_LEN = W_LEN - 1.
 DO W_LEN TIMES.
 W_NUM = P_S_NUM+W_T_LEN(1).
 CASE W_NUM.
 WHEN 'A'.
 W_NUM1 = 10.
 WHEN 'B'.
 W_NUM1 = 11.
 WHEN 'C'.
 W_NUM1 = 12.
 WHEN 'D'.
 W_NUM1 = 13.
 WHEN 'E'.
 W_NUM1 = 14.
 WHEN 'F'.
 W_NUM1 = 15.
 WHEN OTHERS.
 W_NUM1 = W_NUM.
 ENDCASE.
 W_D_NUM = W_D_NUM + W_NUM1 * ( P_S_RAD ** W_FACT ).
 ADD 1 TO W_FACT.
 SUBTRACT 1 FROM W_T_LEN.
 ENDDO.
ELSE.
 WRITE'Invalid Number'(003).
ENDIF.
ELSE.
WRITE'Enter radix between 1 and 16 '(002).
ENDIF.
W_T_NUMBER = W_D_NUM.
IF P_D_RAD = 1.
DO W_D_NUM TIMES.
 WRITE'O'.
ENDDO.
ELSE.
WHILE W_T_NUMBER NE 0.
 W_REM = W_T_NUMBER MOD P_D_RAD.
 CASE W_REM.
 WHEN 10.
 W_T_NUM+W_INDEX(1) = 'A'.
 WHEN 11.
 W_T_NUM+W_INDEX(1) = 'B'.
 WHEN 12.
 W_T_NUM+W_INDEX(1) = 'C'.
 WHEN 13.
 W_T_NUM+W_INDEX(1) = 'D'.
 WHEN 14.
 W_T_NUM+W_INDEX(1) = 'E'.
 WHEN 15.
 W_T_NUM+W_INDEX(1) = 'F'.
 WHEN OTHERS.
 W_T_NUM+W_INDEX(1) = W_REM.
 ENDCASE. " CASE W_REM.
 SUBTRACT 1 FROM W_INDEX.
 W_T_NUMBER = W_T_NUMBER DIV P_D_RAD.
ENDWHILE.
ENDIF.
WRITE:
/10 'The Equivallent number in Base'(001),
 P_D_RAD,
 'is',
 W_T_NUM.
Reward points if helpful .
regards,
rama pammi

Merge Module for crystal report 8.5

Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I want merger module for crystal report 8.5 which can be used with VB 6 package and deployment wizard.
Regards
S. Muhilan

Post Author: ejthunder
CA Forum: Deployment
Hello,
Crystal never had merge modules for v8.5 - you have to build your own deployment package. I think Wise or Installshield use to make their own merge modules way back in the day, but they were never supported by Crystal, and I doubt they're available anymore.
Additionally, VB6's Package and Deployment Wizard does not support configurable merge modules. Current versions of Crystal Reports (v10, v11.0, v11.5) require that the license msm (for RDC deployment) be configured with the keycode. The PDW won't support this.
I hope this helps.
EJ

Merge Module for Windows Server 2008

Hallo,
I made a project with C# in VS 2005, and when I ran this project on a XP machine where no VS 2005 was installed, I needed to make a Setup-Project with a CrystalReportsRedist2005_x86.msm on this machine.
Now I want to run this project on a Windows Server 2008, and this Setup-Project can´t be run on Win Server 2008.
Is there an other Mergemodule for Windows Server 2008?
Every thing runs exept Crystal Reports!
Can somebody help me please???

it was just a beginner mistake, i just had to convert the VS 2005 Project into VS 2008 Project, and install the runtime on the target machine (CRRedist2008_x86.msi). and that´s it!
it was not possible with the Merge Module.
at first I tried to do it with CrystalReportsRedist2005_x86.msm on a Windows 2008 Server.

Redistributable rights for HHActiveX.dll

Greetings.
We've added a glossary to our online help project in RH7 and
have discovered that we need to include HHActiveX.dll so customers
can access the glossary tab in the compiled HTML Help CHM file.
I've been asked to provide information showing that it's okay to
redistribute the DLL file. I"ve found plenty of places that call
the file a redistributable, but I have not found any statements in
the license agreement.
The Redistr.txt file in the Redist folder mentions a
"Redistributables" section in the license agreement but searching
the license.htm file doesn't return any matches.
Any suggestions?
Thanks.
Kim Nylander

The best I can come up with is the RoboHelp help file. Look
for the HHACTIVEX.DLL index keyword which highlights the
"Distributing Microsoft HTML Help" topic. In there is a dropdown
link for "support files" which explicitedly mentions having to
distribute the file.
Personally I do not think it a worthwhile use of your time
persuing this. If distributing this file was against the RH licence
agreement there would be thousands of firms being taken through the
court by Adobe. It is just not an issue. It is tacit agreement that
if you accept the licence terms that you can freely distribute the
file.
This may not be what your company lawyers (or whoever is
persuing this) want. If it isn't, maybe they should contact Adobe
directly to get a definitive approval and stop wasting your time. I
suggest you put things a little more delicately than that though

Is there any function module for converting text to hyperlink?

Hello all,
          I am designing an application in BSP wherein the user can enter hypertext values for some
          of the data enteries in the database table. Is there any function module available for converting
          text into hypertext. Eg. if the user enters 'www.mypersonalwp.com' then it should convert this
          text value into a hyperlink.
Thanks in advance.
Gurmahima.

Hi,
Refer the given below link
http://help.sap.com/saphelp_erp2004/helpdata/EN/85/ce25c2d7ae11d3b56d006094192fe3/content.htm
Hope it helps you
Thanks
Arun Kayal

Hi, is there any function module for se16 transaction?

Hi help me out, can refer function module RS_TABLE_LIST_CREATE....found it

The below are the list of Function Modules for se16 ...

1.ATT_GET_TABLE_ENTRIES
2.R_GET_VALUES_FROM_TABLES
3.S_DATABROWSE_FIELDSELECT
4.S_INTERNAL_TABLE_VIEW
5.S_TABLE_CONTROL_GENERATE
6.S_TABLE_REPORT_GENERATE
7.S_TABLE_VIEW
8.S_TABLE_VIEW_DDIC
you can use 6th or 7th function module for displaying the table data .
reward points if it is usefull ...
Girish

Is there any sap module for power plant design

Hi All,
This is not the question to put in sdn.
Actually i completed my M.Tech(Instrumentation & Control), right i am working as a power plant designer in Instrumentation Control. I want to know which Module of SAP will suite for my career. I am working for power plant and oil and gas company.
Regards,
R.K

Dear R,K,
SAP have a industrial specific module as IS-Oil and Gas.
You can visit
http://help.sap.com/saphelp_oil472/helpdata/en/67/bfa73ad9ccf101e10000000a11402f/frameset.htm
Also you can look for PM and PP module in SAP.
Regards,
Vishal

Is there any Bluetooth module for Satellite A100-225?

Hello
I am wondering if a bluetooth module exists for a Satellite A100-225 (PSAA9E Series). What model?
Thanks

No, unfortunately this notebook does not support the internal Bluetooth module and it cannot be upgraded with such module.
If you want to use the BT technology you will have to switch to external solution.
Buy simply an USB Bluetooth stick. Such sticks are simply to use. Just plug in the USB port and configure it.

Is there a merge module for HHActiveX.dll

Similar Messages

Maybe you are looking for