Is there a minimum contract period for photography cc

is there min contract period ?

Hi there
The Photography plan is only available as an annual plan - either paid up front or paid monthly.  If you were paying on a monthly basis and wanted to cancel before the end of the year there would be an early termination fee of 50% of the remaining months.
With Creative Cloud complete and single app plans we also offer a month-to-month plan which can be cancelled at any time without penalty.
Hope this helps.
Bev

Similar Messages

  • Minimum contract period not stated

    I'm having a dispute with BT at the moment about my contract period. When I renewed over the phone, I thought I was in a 12 month contract, BT believe I am in an 18 month contract.
    Trouble is, no emails or letters were ever sent out ( I cannot find any record of any, nor BT) and the only record we both have is contained in the phone call made 12 months ago. It is going to take 3 weeks to retrieve the tape.
    Is it legal for a company to extend your contract period without sending formal notification in writing? Presumably, there were terms and conditions attached to the offer, these were not sent out either.
    And, why isn't the contract period printed on your statement or available on My BT? Presently, the only thing we have to go by is a telephone call.
    One for Ofcom, maybe.

    piedyp wrote:
    Is it legal for a company to extend your contract period without sending formal notification in writing? Presumably, there were terms and conditions attached to the offer, these were not sent out either.
    Yes.  Other than buying or selling property (land, houses, etc.), verbal contracts are just as valid as written ones.

  • Minimum time period for 6602

    I'm using 6602 counter with the application of ND_BUFFERED_PERIOD_MSR with countinuous buffer to measure the time period between the consecutive pulses. If I send in constant time period pulse from frequency generator at 300kHz, the board returns "dataLossError" while 250kHz pulses give no error at all. It means the minimum time period is about 3 to 4 microseconds. However, if I send random pulses at 1kHz average frequency, the card sometimes gives "dataLossError". It seems if there is a single pair of pulses with spacing less than 3 to 4 microsecond, the card gives "dataLossError" although most pulse pairs are separated by a long time. Is that right?
    Thanks,

    I would suggest you use a shipping example to measure your pusles. If I recall from your previous post, you are using CVI. So you could go to Help->Find Examples (see screen shot below) and select an appropriate example.
    Attachments:
    Period Measurement CVI Find Example.JPG ‏107 KB

  • Is there a minimum IOS version for windows radius 2012R2

    Hello,
    We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
    We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
    do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
    Thanks

    Hi,
    Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
    check the below link.
    http://msdn.microsoft.com/en-us/library/cc731363.aspx

  • [locked] Will there be a grace period for CS5?

    Hi.
    I don't like this question about the new Creative Suite and when it will finally be released. But I've a question about the grace periods Abobe offered the last times after their release announcements. Will there be one for CS5 too?
    Best regards

    Rick,
    Can you please expound on exactly what is meant by the "grace period"? Are you referring to the duration of a trial? Or possibly a certain length of time one is able to upgrade at a reduced price/
    The "grace period," that I was referring to is the purchase of, in this case, CS4, just prior to the release of CS5. Historically, with a smallish window in time, where the newer upgrade is offered free to those who qualify. IIRC, that window has been about 30 days, prior to the official release of the newer version. Many software companies do similar. That is what I was referring to, and assumed that the OP was, as well.
    Now, Adobe has done "pre-sells" for some programs, so I do not know how this might affect things. Again, only the product marketing folk can definitively comment. Mine are just speculation, based on decades of using Adobe products. Still, I do not recall having ever purchased an upgrade, within the time frame to get the new one free. I usually upgrade much earlier, and just use the new program. When a newer one comes out, I study it, and then decide if I really need that.
    Hope that this clears up, where I was coming from,
    Hunt

  • Is there a grace period for apple email address?

    Hey guys I was wondering if there was a grace period for apple email address yourname@'insert apple domain name'.com once you deactivate or delete it before it can be used again?
    for example with phone numbers for certain companies it takes 2yrs once the number is disconnected for it to be available to be used again.
    Which leads into why i'm asking this, as the reason for this is I had an apple ID/email address that i used when working for an apple reseller a few years ago and when i left i was asked to delete it. which i did but i would like to use the yourname part of it again with @icloud.com but its saying the email address is already in use.
    Now i know what you might say that someone else could be using in but thats is very unlikely as i have a very unique name plus i also know that apple in their infinite wisdom kept all address ending in @me.com and @apple.com active in the icloud change over to allow association between @me.com accounts and @icloud.com accounts and i believe the later is the cause of my fustration.
    If there is no grace period is there anyway to prove that i was [email protected] and delete that record so that i can setup [email protected] as the apple ID in question are different?

    If you are reading this message either in the online community or in an email notification you have received, please be aware it is a temporary post.
    The support community is currently undergoing some minor problems which can occasionally result in newer posts being rendered invisible. One method of working around this issue and revealing the hidden posts is to add a further post of one’s own.
    However because it’s not possible to see what one is replying to, it’s not possible to make a valid post in terms of the question(s) being asked, but once it has been posted and the invisible posts become visible again, one can then edit the post accordingly.
    If you are seeing this in an email notification, unfortunately you won’t be notified of any subsequent edit and as such should return to the message in the online community to see any changes made to it.
    On the other hand, if I have nothing worthwhile to say, it might remain as it is.

  • Payment to Vendor with Contract Period

    HI
    I want to set the contract period for each vendor in SAP  while creating Vendor Master , Payment through F110 should not be allowed if his/her contract expired .
    Please advise how can i achive this .

    Hello,
    There is no such functionality is being available in SAP to set a contract period in vendor master.
    However, you can block the vendors for payment.
    Regards,
    Ravi

  • My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

  • Field 'Contract Period' does not exist in definition for business component

    Hi everyone
    I create a Field "Contract Period" in BC "Quote" with an extended table and put it in the applet view "Quote Full Form Applet" the field works fine in the view, we can update and insert information in it and shows perfect in the database also.
    Our problem is when create a Integration Object for reports in BIP Reports the system said something like this when we try to generate the sample data:
    ObjMgrLog     Error     1     0000002d4cd016bc:0     2010-11-02 13:18:39     (adptutils.cpp (5715)) SBL-EAI-04376: Method 'FieldValue' of business component 'Quote' (integration component 'Quote Template') returned the following error:
    "Field 'Contract Period' does not exist in definition for business component 'Quote'.
    We compiled the BC and the IC, and did the Deployment of the IC in Tools but it didn't work, the thing here is if I remove this field the report works fine. Is there any other component or Object that we have to compile to get Siebel recognition?
    Any ideas?
    Thanks in advance
    Edited by: user7286211 on Nov 2, 2010 8:05 PM

    To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
    LOOP AT SCREEN.
      IF sy-tcode = 'FB02'.
        IF screen-name = 'BSEG-HKTID'.
          screen-input = 1.
          screen-invisible = 0.
          screen-active = 1.
          screen-output = 1.
          screen-group4 = ' '.
          MODIFY SCREEN.
          EXIT.
        ENDIF.
      elseif sy-tcode = 'FB03'.
          IF screen-name = 'BSEG-HKTID'.
          screen-input = 0.
          screen-invisible = 0.
          screen-active = 1.
          screen-output = 1.
          screen-group4 = ' '.
          MODIFY SCREEN.
          EXIT.
        ENDIF.
      endif.
      ENDLOOP.
    and, all ready.

  • Test period expired creative cloud for photography

    Test period expired, creative cloud for photography. I have done all the steps that appear on the web about it and not work for me. What I can do? Thank You.
    I have t Windows 8.1 64-bits

    When the 30 day trial ends, you need to purchase a subscription to continue... have you done that?
    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Management of Trial Period for Billing Plan !!

    Hello SAP folks,
    I have a real time business requirement where we essentially have Rental Contract which are being created from Sales Order and there is a billing plan defined for this Rental Contract. With new introduction of some Marketting strategy of Marketting group of my Client they have come with introduction of trial period for 30,60 and 90 days for the Contract !!
    Now When we talk about the Trial period for 30 days, there are two important triggering point which are mapped from Sales Order to Contract i.e. No of Payment and Term of Contract. For 30days of Trial period, the number of payment is 11 if the term of contract is 12 month, 60 days the number of payment is 10 and term of contract is same as 12 month.
    Now my question is how can i map this sort requirement in SAP with respect to Billing Plan i.e How to set the system such the billing should be happening based on No of payment ???
    Any pointers on this requirement shall be really appreciated !!!
    Regards,
    Sarthak

    Hello, There's an FAQ that says after the release of Photoshop, in spring 2012: http://forums.adobe.com/message/4209419#4209419 and I've read in 60 days in this forum, but don't have a source for that.

  • Help me cancel the 30-day free trial period for Adobe Creative Cloud

    HI, I want to cancel my 30-day free trial period for Adobe Creative Cloud.
    Please, assure me you won't start charging me after the free trial period.
    Thanks

    alexacaesco wrote:
    HI, I want to cancel my 30-day free trial period for Adobe Creative Cloud.
    The customer support should be better. How are we supposed to contact you guys if there is no phone number for the USA?
    Please, assure me you won't start charging me after the free trial period.
    Thanks
    Oh!! just stop using it and after 30 days, it will expire.  No need to to take any action.  It is free so anyway so why bother?
    They cannot start charging you because they don't have your credit card details.  They need to have your express permission to take out a full contract of 12 months.

  • Fixed Asset calculates extra period for Depreciation

    Hi All,
    I have imported the Fixed Asset for 2007B for the Year 2010. while checking the import, i notice that the system calculates an additional period for depreciation.
    Here is my scenario :
    a. Asset Cost = 15,863.12 (purchased on 31-May-2007).
    b. Useful Life = 36
    c. Remaining Life = 4
    The above are displayed according to import file.
    At the Depreciation Tab, there are 5 rows of planned depreciation calculated. Period 01 to Period 05.
    How can the system calculates 5 periods when there is only 4 remaining periods for the asset?
    This happens to all the assets being imported.
    Please advise.
    Jessie

    Further information.
    The Net Book value = 1762.94
    with Accumulated Depreciation = 14100.18.
    So the remaining 4 periods should be calculated as = 440.735 (per month for 4 months).
    but it is displayed as 352.59 per month for 5 months.
    The Fixed Asset is setup as Monthly Basis.
    Using Straight Line Mehtod = Net Book Value / remaining life.

  • Can we open and close Posting period for HR module

    Dear All ,
    Can someone please tell me is there any option available to open and close Posting period for HR Module.We have In Finance and MM.
    Cheers
    Balaji Dhanavel

    check
    the report RPCIPE00 useing SE38
    can u be some wht clear of ur query once

  • Posting Periods for End Period Closing.

    Hello everybody,
    I need your assistance about at Period End-Closing.   I got a customer from Costa Rica; the point is his fiscal periods go from October to September and We have the problem the customer didnt prevent this topic and He added the periods from January to December.   The question is: is there an financial option or what process We can follow to execute this topic on the best way possible?
    Regards and thanks for your help,
    Daniel

    Dear Daniel,
    The issue if i presume correctly is that they are following the year as Jan to December and they want to do the closing for the october to September which are two posting periods (October- December of Previous Year) and (Jan to September current year).
    This seems to be the incorrect entry of the Posting periods as they follow October to September Posting Period.
    You can try the workaround as follows in the TEST COPY of the database :
    Try to close two Posting Periods; for the October to December and Jan to September separately and check the figures. I believe you need to involve the company accountant to analyse and also check the various financial reports and the impact on the same.
    It cannot be confirmed if the above may be helpful or not but you can try in the COPY to check.
    Please test it and check in COPY of the database.
    You can go through the above mentioned document for some more information on the Posting Periods.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

Maybe you are looking for

  • Using delete and FOR ALL ENTRIES

    Hi, We have a error message regarding the following code : Delete FROM TABLE FOR ALL ENTRIES IN lt_TABLE WHERE TABLE_KEY1  = LT_TABLE_KEY1 Could we use the For All entries with "Select" ? For information, the error message is "Unable to interpret "FO

  • Need to reduce a 2.7 MB PDF into 1200 KB

    need help reducing size of a 2.7 MB PDF file into less than 1200 KB PDF

  • Why will my bookmarks be deleted when syncing?

    Just updated to ios6 and when I sync my snow leopard laptop, it tells me that I will lose 25% of my bookmarks.  This never happened before.  What do I do?

  • Is it possible to modify private member of a class directly from main function?

    This is the code which modifies the private String stk[] indirectly from main method when sorting option is called from main method: import java.io.*; class Stack     private String stk[];     private int tos;     private int size;     Stack()       

  • Pre-Orders without Uploading Assets?

    I received this via new announcements email fromiTunes Connect. One of the news items was this: Pre-Orders Pre-orders are an easy way to generate sales before publication. Now, you can make your book available for pre-order without submitting a cover