Is there a minimum IOS version for windows radius 2012R2

Hello,
We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
Thanks

Hi,
Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
check the below link.
http://msdn.microsoft.com/en-us/library/cc731363.aspx

Similar Messages

  • Minimum IOS version for SPAN on 2950s

    I have a new IDS sensor that we finally have up and running. In attempting to montor one of our 2950 switches we noticed that the monitor command is not an option. Is there a minimum version or platform that has this option? I have found nothing so far in the online docs. This switch is currently running 12.0(5.3)WC(1).

    HI Friend,
    The code you are running has the SPAn capability but not very advance features are available.
    The command is "port monitor
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/cli/cli_cmds.htm#xtocid1856851
    Also the feature has limitation that if the traffic on monitoring port exceed 50% it will be a problem.
    Check the release notes for more details
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/1169303.htm#xtocid13
    I will say to have more better code on your switch to use SPAN in better way something likt this
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12119ea1/2950scg/swspan.htm
    Yiu can have much better codes like 12.1(20)EA1 and higher.
    HTH
    Ankur

  • Minimum IOS version for IPS sensor v6 on CAT6500 series

    What is the recommended minimum Cisco IOS Software that will support Cisco IPS Sensor Software v6 on the CAT6509

    It depends on your Supervisor Engine, MSFC/PFC and capture method.
    There's a good IDSM "software and hardware requirements" table here (but better elesewhere on CCO)
    http://cisco.com/en/US/docs/security/ips/5.0/installation/guide/hwIdsm2.html
    •Catalyst software release 7.5(1) or later with Supervisor Engine 1A with MSFC2
    •Catalyst software release 7.5(1) or later with Supervisor Engine 2 with MSFC2 or PFC2
    •Cisco IOS software release 12.2(14)SY with Supervisor Engine 2 with MSFC2
    •Cisco IOS software release 12.1(19)E or later with Supervisor Engine 2 with MSFC2
    •Cisco IOS software release 12.1(19)E1 or later with Supervisor Engine 1A with MSFC2
    •Cisco IOS software release 12.2(14)SX1 with Supervisor Engine 720

  • Is there a special iOS Version for in store demo?

    The thing is, we have 3 iPads fur public usage in our cafe. But customers tend to be funny and
    set a passcode lock so that we have to restore them like twice a week which is more than annoying.
    Is there any chance of preventing the customer from doing so? Can I restrict the access of settings.app or
    the "Passcode Lock" Feature?
    iPads or iPhones in Apple Stores (or any retailer of Apple products) don't have the "Passcode Lock"
    choice in ssettings.
    Any ideas would be appreciated …

    Unfortunately, the Settings app cannot be restricted/protected.
    But customers tend to be funny and set a passcode lock so that we have to restore them like twice a week which is more than annoying.
    You could loan out the iPad and hold their ID until they return it.  If they return it with a passcode lock, tell them they will not be allowed to use one again.  This may not prevent it 100% but will most likely reduce it significantly.

  • TS2753 i have removed iTunes and re-installed the latest version for Windows XP and still can't access the iTunes store; is there any way to get access to the iTunes store again?

    I am unable to access the iTunes store for the last two months, I've tried removing the software and re-installing the latest version for Windows XP and still no access; is there a solution that would allow me to get access again?

    If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

    Hi,
    Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
    1) Is there a limit on the size of the exe which can be run on it?
    2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
    3) If a list of what it does or does not support is available, it would be extremely helpful.
    Thanks In advance.
    Regards,
    Vijay

    Anand, 
    I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
    http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
    It does not contain the full run-time engine, but will allow some executables to run.
    1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
    2) Can someone from NI reply to this and shed more knowledge?
    Regards,
    Vijay 

  • Installation of Master Collection CS3 (disc version for Windows)  on a laptop without optical drive

    Installation of Master Collection CS3 (disc version for Windows) -  is there any possibility of installing my legitimately purchased MC-CS3 on a new laptop without optical drive? Perhaps through a download link or will tranfering all Adobe files from my old to my new computer do the trick as well? Or do I necessarily have to buy an external optical drive? Thank you for answering.

    No need to buy an optical drive and don't try transferring, it rarely works.
    Download the installer from Download CS3 products
    Install then enter your serial number to license it.

  • Is there any Oracle DB version for VM Ware Arch ?

    Hi All,
    I have installed VMWare workstation in my laptop and i am interested to install oracle DB on it.
    Is there any Oracle DB version for VM Ware Arch ?
    Regards,
    Rameshkumar

    I use VMWare to host Linux and install Oracle DB in the Linux.
    A buddy of mine does the same for Windows in VMWare.

  • 64-bit version for windows not working

    ive installed the 64-bit version for windows, i connect my 5s and it tells me to uninstall itunes and reinstall the 64-bit because the itunes isnt the right version

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Is there a Hyperion DRM version for Linux?

    Hi All,
    I would like to know if exists a version of Hyperion DRM for Linux.
    Another question is if the Hyperion DRM version for Windows could be installed in a Virtual Machine.
    Regards,
    Harvey

    No there is not a version for Linux. The middle tier has to run W2K3. The database layer can be in Unix etc.
    Yes I tried running DRM on VMWare works great. Not sure about other virtual software.
    Regards,
    Daniel...

  • Is there going to be Minecraft for windows?

    hey! is there going to be minecraft for windows tablet? without minecraft i don't enjoy windows :P the minecraft pc version makes my windows tablet lag abit.

    This web site is for people who need help in writing their own software.
    For help in mc plans, contact mc customer support. 
    Visual C++ MVP

  • I ther any SQL developer version for SunOS 5.10 (Unix)

    Is ther any SQL developer version for SunOS 5.10 (Unix). If it is available, please tell me from where it can be downloaded and how it can be installed?

    <p>You can use any of the downloads except the Mac or Linux ones.
    <p>We separated out the Windows downloads because that's the largest audience we have. So there are 2: one is the full install, and one which allows users to point SQL Developer to an existing, installed JDK. This means that you don't end up with duplicate or even multiple JDKs installed.You can download either of these. If you don't have the JDK installed, you might as well install the full build. The other thing about the full install is that it includes an early JDK release and many users prefer to use the latest JDK.
    <p>The entry for the "multiple platforms" is exactly the same build and code as the Windows without JDK. Both of these require you to download and install or already have a JDK installed.
    <p>I try to make this page clearer for each release. It seems I'm not there yet!
    <p>We certify on Windows, Linux and the Mac. There is a page detailing certification specifics see the home page of SQL Developer. We do not certify SunOS, but Unix platforms are supported. This means that you can use SQL Developer, but any issues you run into must be tested against a certified platform before we'll track the bugs.
    <p>Sue Harper</br>
    Product Manager

  • Old versions for Windows 8 debugger

    I can't find old versions of the Flash Player for Windows 8 debugger.
    http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
    I found the Flash Player for Windows 8 debugger. But I guess it may be for the Flash latest version.
    http://www.adobe.com/support/flashplayer/downloads.html
    I'd like to know where I can download the old versions for Windows 8 debugger.

    Everything was doing well back then. And when W8 came, then the problem started. A quick fix from here and there would do the job but here comes W10 another major adjustment and who knows what's next. For whatever it is,... skype in toto is a helping hand ...

  • Will there be an ios update for ipod 2 gen ?

    will there be an ios update for ipod 2 gen ?

    I doubt it since it has been over a year since Apple released an update for the 2G iPod. A 2G can only go to iOS 4.2.1
    A 1G to iOS 3.1.3.

  • Updated pages on 11/25 but it in application it is saying there is an new version for $19.99.  Is this a different version or the same?

    updated pages on 11/25 but it in application it is saying there is an new version for $19.99.  Is this a different version or the same?

    Launch Pages.
    From the Pages menu bar click Pages > About Pages
    The latest version available is 5.0.1
    If it's 5.0.1, your currently installed copy of Pages is up to date.

Maybe you are looking for