Is there a minumum set of windows services that Labview can run under?

I need more cpu resources to run my VI, is there a list of Windows resources that I can turn off that will not effect the VI?
Solved!
Go to Solution.

Hi
I would also like to know if there is a minium set of services that LabVIEW actually needs. Not because my VI's need more CPU, but because I don't see why I need to have 10 NI services running in the background even when LabVIEW is not running.
The list of NI services which I have running on my Vista 64 bit system when LabVIEW is not running is:
1 tagsrv.exe national instruments variable engine 9,996k
2 nisvcloc.exe NI service locator 0,920k
3 nipalsm.exe NI-PAL service manager 3,492k
4 nipalsm.exe NI-Pal service manager 7,468k
5 nipalsm.exe NI-Pal service manager 21,356k
6 nimdnsResponder.exe National Instruments Zeroconf service 1,924k
7 niLxiDiscovery.exe National instruments LXI Discovery Service 1,592k
8 nidmsrv.exe nidmsrv 3,492k
9 lktsrv.exe iktsrv.exe 3,480k
10 lkads.exe lkads 3,124k
TOTAL 56,844K
Does anybody know which of these I actually need? I do not plug any DAQ hardware into this machine. It is purely used for writing vi's which are then transferred to another machine where they are tested. I have LabVIEW 8.6 and DAQmx installed.
Thanks.
J

Similar Messages

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

Then 'm selecting 3 points after camera tracker and right click them there is no SET GROUND PLANE in the list, can U help me?

Then 'm selecting 3 points and right click them there is no SET GROUND PLANE in the list, can U help me?

Quit farting around with the camera tracker. You're not nearly ready to handle it. Go here:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

If they have set up port forwarding for you already then that is different. In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients. It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer. I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
First:
ssh ipaddress -l adminusername
(example: ssh 192.168.1.1 -l macadmin)
Second:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode?

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode? However, when I launch System Restore it asks me to load the disc marked with teh sinfgle dot but then doesn't seem to run it?

Follow up. I went to the site at the link I refered to and downloaded the recomended
"NetBoot for Mac OS 9." http://support.apple.com/kb/DL1192
The netbook9.dmg needs to be mounted on a PPC Mac as it would not open on a the intel Mac I used for downloading. (Reason - legacy image should be converted.) I copied to a G4 iBook and mounted it then saved the english folder conaining the NetBook.pkg. From there follow the attached picture using Pacifist to extract the NetBook HD folder which contains an OS 9.2.2 System folder.

Is there a free version of SP 2010 that developers can use to test the software?

I would like to set up a 2 server SP 2010 environment just for test. There would only be one or two users using it. I would like to set it up with one of the servers as a web front end and the other as an application server.
In looking at the SharePoint 2010 download page, it appears there is a 6 month trial license that one can get with the download. But it appears that after that, some purchase is necessary.
I have also heard that there used to be (or still is?) some sort of developer subscription that, if one has, one can get developer licenses for servers.
Is there a good reference that goes over the various approaches a developer has for creating a low/no cost SharePoint farm?
Thank you.

My friend has prepared and made available a virtual machine for downloading. Drawback is it is SP 2013 not 2010. If you want you can download and do experiments.
MSDN subscription lets you download software for free.
Saifullah Shafiq
Blog:
Twitter:   LinkedIn:
  Facebook:
  Google+:
  Latest Book:
A Practical Guide to SharePoint 2013

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files).

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files in it at all - not sure what it would be useful for then).
Any suggestions?

Question asked and answered several times.
If you didn't save, nothing is recoverable.
iWork apps don't create temp files so, as far as you on't save something, Time Machine can't archive it.
Yvan KOENIG (VALLAURIS, France) mardi 5 juillet 2011 12:25:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do I set pages up so that I can type a script for a radio play

here we go, that is if I'm not driven mad by the process of trying to work out how to use this help thing.
how do I set pages up so that I can type a script for a radio play ie the character then as an indented bit what they say

Here's a sample, using what should be a familiar script to any radio drama buff, and showing a few of the features you'll want to incorporate into your template.
Features noted by arrows:
This is the "First line indent" margin stop, in this case, set to produce a 'hanging indent'. This stop sets the starting position of the first line of a Paragraph.
Left margin stop: This stop sets the starting position of all lines in a paragraph except the first.
When setting margins, set this one first, as it will drag the First line indent stop with it when moved. After setting this one (by dragging it to the position on the ruler where you want it to be), drag the rectangle (First line stop) left as far as it will go.
Right margin stop.
Running Header: This is a combination of text that appears on every page, plus the page number / page count—very useful information when someone drops his script. (Typed here, but a combination of typing and inserting the two number calculators from the Insert menu in the actual template.)
Tab character. Used to move the first line of the dialogue into alignment with the rest of that paragraph. The Left margin stop also acts as a Tab stop.
Paragraph break (made by pressing the return key). After a Paragraph break, the next line of the script will start at the left margin of the page. To break a long monologue into smaller blocks, use a 'soft return', made by pressing Shift-return, as I've done twice here...
...to produce an empty line without creating a 'new paragraph' (or in this case, a new item on the current list.
Those are the basics for producing the body of your script.
Regards,
Barry
Sample script is an excerpt from:
The War of the Worlds
COLUMBIA BROADCASTING SYSTEM
ORSON WELLES AND MERCURY THEATRE ON THE AIR
SUNDAY, OCTOBER 30, 1938
8:00 TO 9:00 P.M.

HT201364 I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you

I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you

Check here > OS X Mavericks: System Requirements

Considering a Macbook pro 13". want to use garage band - how do i run line in from my guitar. There is not a mic/line input that I can see in specs.

Considering buying a Macbook pro 13". Want to use garage band - how do i run line in from my guitar. There is not a mic/line input that I can see in specs.

Simple. GarageBand question, GarageBand forum where all those users are jacked into their Macs and can tell you how. Also look to the right of your post to the column, "More Like This."---------------------------------------------->
https://discussions.apple.com/community/ilife/garageband

How do I move a partition on my mac hard drive, to an external hard drive so that i can run windows when the external hard drive is connected

How do I move a partition on my mac hard drive, to an external hard drive so that i can run windows when the external hard drive is connected

Are you talking about a Bootcamp partition? You can't boot Windows from an external drive.

Default services that need to run on Oracle GRID.

I started learning RAC recently, I have got 3 years of experience in managing stand-alone instance.
The question I have now is
Q1 - What are all the default services that need to run on Oracle GRID ?

Hi,
user639966 wrote:
I started learning RAC recently, I have got 3 years of experience in managing stand-alone instance.
The question I have now is
http://learnwithme11g.wordpress.com/2010/03/15/11g-new-background-processes/
http://www.oracle-home.ro/Oracle_Database/RAC/11gR2-Clusterware-Startup-Sequence.html
http://appsdbaworkshop.blogspot.in/2011/11/manage-startupshutdownstatus-services.html
better to refer oracle document
http://docs.oracle.com/cd/E11882_01/rac.112/e17264/toc.htm
Regards
Hitgon

Is there a minumum set of windows services that Labview can run under?

Similar Messages

Maybe you are looking for