Is there a new driver needed to run Photoshop CC after installing Windows 8.1?

Has anyone had trouble with downloading pictures to Bridge after installing Windows 8.1?

You may have to reset preferences.  Hold down Ctrl key and start Bridge.  You should get a reset window.

Similar Messages

  • How do run OS X after installing windows

    How can I run both windows and os

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.
    If you've already installed Windows and need to return to OS X, but have not installed the Startup Disk preference panel for Windows, then restart the computer. After the chime press and hold down the OPTION key until the boot manager screen appears. Select the disk icon of your OS X system, then click on the arrow button below it.

  • HP Truevision HD running very slow after installing windows 8

    Hi.
    I have hp 1000-1140TU Notebook PC.
    It came with Windows7-Home Basic and CyberLink YouCam worked smooth on it.
    Since i've installed windows8, and installed Cyberlink YouCam for windows8, my webcam is running really slow! There is too much lag. Please help?

    Hi,
    Did you verify that all of the required drivers were installed after the Win8 install was complete?
    You can check that by clicking on the search charm and then typing in Device Manager and clicking on the device manager icon that appears.
    Best regards,
    erico 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

    Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

    Hi there ricalimo,
    I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • Internal DVD Drive isn't working... must install Windows via Boot Camp

    My internal DVD Drive has died. Just keeps ejecting every CD or DVD I put in it.
    *The real problem is that i need to install Windows via BootCamp...*
    I've already defraged my Hard Drive and partioned it for the Windows installation
    But even using an external USB DVD Drive I couldn't get to boot up from it
    to install Windows XP SP3.
    BootCamp lets me use the windows disc that is inside my external DVD drive
    and it even restarts... but after the restart chime, and the grey screen, it doesn't
    start the windows installation... it continues to boot to my Mac partition.
    (i've tried to manually change the boot disc in System Preferences, but it was in vain)
    I also tried to use another Mac's DVD drive in Target Disk Mode... no results.
    I even tried to Copy-Paste the entire file system of a Windows installation from a BootCamp of a friend but had no success making it to work.
    *Is there any way I can install Windows with my external DVD drive?*
    Because I don't have the cash for buying a new one right now...
    And I really need windows installed via BootCamp...
    Thanks in advance,

    For this problem there no alternative > I bought a new internal DVD drive and then I was able to install Windows via Bootcamp.

  • Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems

    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032

    jackg032 wrote:
    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032
    Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop.   You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
    Windows 7 was billed as the first MS OS to need less system resources than its predecessor.  If your system hardware will support 64bit, then consider paying $90 for an OS upgrade  What is your system out of interest?  I have a feeling you are running with just 2Gb RAM, which just isn’t enough.  Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • New imaged machines fail to complete reboot after install

    New imaged machines fail to complete reboot after install of 10.4.9 image
    Running off both 10.4.9 Server and a 10.3.9 Server machines imaged from the same disk image and different disk images fail to reboot after imaging is complete. All machines go through various stages of reboot some initial most all the way to waiting for finder to boot up on desktop. Nothing is wrong with the items, installed the entire image is installed if you looking at the machines via firewire. All .nbi sets were created under 10.3.9 (to avoid 10.4.9 problems) all disk images with Disk Utility all .nbi with 10.3.9 Network Image utility.
    Anyone any clues been driving me nuts for about a week and I have 500 ibooks to image.
    Also the reference machines for the images are same ibooks that will be imaged, so its the same platform.
    various   Mac OS X (10.3.9)  

    All is the same for me except I used a 10.4.9 server only to create the disk image using Disk utility, and all other work ison a 10.3.9 server. Greay or blue screen on reboot otherwise machines look fine.
    I am having this same issue....
    Order of events as follows...
    Build image on source mac (10.4.9)
    Create image on server for netinstall from source mac
    (10.4.9)
    Set Netinstall image on server via netboot (10.4.9)
    Install Netinstall image on target mac via netboot on
    server (10.4.9)
    Installs fine and says successful.....Apon reboot all
    i get is the grey screen with the apple and spinning
    icon....Sits there and doesn't change....
    On further inspection I notice that there are things
    that are missing off target mac
    very strange....Sounds like a broken System Image
    Utility to me
    Boz
    Mac Pro 2.66ghz / PB
    17inch 1.5/ G4 MDD 1.25DP/ MBP 1.83ghz/   Mac OS
    X (10.4.8)  

  • I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

    I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
    I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
    Thanks in advance.

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • No bootable drive after installing windows successfully

    I am trying to install Windows XP/Vista 32 Bit On Intel Mac Notebook through BootCamp.But after installing windows successfully,when it reboot?resatrt,It gives me error message that NO bootable Drive ,Press any to key to continue.......
    I have Downloaded Windows XP/Vista 32 Bit ISO format and burned it on my DVD through Disk utility.I can install windows successfully but when it restarted then it gives that message.However I am able to locate windows hard drive after holding the Option Key and when I choose the windows HDD (BootCamp),It gives me same error.
    I started the installation in osx using boot camp, and the windows was completely installed, even the boot camp driver for windows was installed and there are options to restart into either windows or mac osx.
    But when I restart the machine and choose to go into windows, it just can not boot, saying no bootable device. If I insert the installation disc into the drive, then I restart and go to windows, it can boot successfully.
    Please Help.
    Much appriciated.

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.

    Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.

    Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.

Maybe you are looking for