Is there a new issue of Firmware for WVC54G?

Help! My old router died and I just bought a Linksys E2000 but having problems connecting my old WVC54G camera as there is no WPA2 only the old WEP security. The rest of my network is now running on WPA2 after much hassle (that's another story) but don't want to go backwards and enable WEP on the router. It's running V5.10, Feb 21, 2005 firmware. The camera works directly with cat5 cable.
Anybody help with settings?

Since you are using an old WVC54G camera in which you have only WEP and WPA as a security mode… So if you are using WPA2 security in the Wireless Router then you need to lower down the security level in order to make the camera working...

Similar Messages

  • HT3842 Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

    Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

    Try This
    http://support.apple.com/kb/PH12359

  • When will there be a new update of FirmWare for N9...

    I am wondering and would like to know why has there yet to be a new updated fw available for the Nokia N95-3? All the other versions have received fw updates, the N95-1, N95-2, and N95-4. Is there a problem that there is no new fw update yet for N95-3? Where is it!? I would like to be able to use the phone, know it has the up to date fw available for it to be more stable and working properly. I know I will have problems with this phone when I get a 16gb micro sd hc card because the firmware has yet to be updated! Nokia can't neglect the US customers who have bought their phones! If this keeps up I will definitely not buy a Nokia in the future.

    I am wondering and would like to know why has there yet to be a new updated fw available for the Nokia N95-3? All the other versions have received fw updates, the N95-1, N95-2, and N95-4. Is there a problem that there is no new fw update yet for N95-3? Where is it!? I would like to be able to use the phone, know it has the up to date fw available for it to be more stable and working properly. I know I will have problems with this phone when I get a 16gb micro sd hc card because the firmware has yet to be updated! Nokia can't neglect the US customers who have bought their phones! If this keeps up I will definitely not buy a Nokia in the future.

  • Will There Be New Zen Micro Firmwar

    hi, just wondering if there will ever be any more new firmware for the micro as the last firmware was out in August last year.
    thanks

    There was the PlaysforSure update Firmware (2.2.02) on 2/6/2005, There was the Driver update(.30.03) on Sept 3,2005.
    If you didn't know about these, go to the top of the page, click SUPPORT and then click Downloads to find the information.
    luvmyrescuedogs
    Message Edited by luvmyrescuedogs on 08-9-2006 0:30 PM

  • Will there be new Audigy 2 Drivers for XP64? Or N

    Will there be new drivers for XP64 and the Audigy 2? I FINALLY found why my Audigy 2 gives no sound in the center or rear channels. I have more than 2 GT of RAM. In my case I have 4G of ram and the I/O space used by the Audigy is mapped above the 2.8 GB boundary of XP and the drivers do not work. If I do a /maxmem=4096 in my boot.ini, everything works as it should.
    So I know this has n=been reported for the XFi, and a fix will come, but will a fix come for the Audigy?
    Thankws

    I also have the problem with Pinnacle PCTV/Audigy 2, reported by numerous users both in SB and Pinnacle forums. (The problem in short, is that if Timeshifting is enabled in PCTV Vision, the line-in is muted when recording, resulting in silent recordings. Effecti'vely, this means the timeshifting feature does not work with Audigy 2) I have an on-going support case with Pinnacle, but they do not seem to acknowledge the problem; they just go on about updating drivers and re-installing the software. Clearly, the problem is a quirk with Audigy 2 that PCTV does not handle. So who to blame? To add to my frustration, I discovered that my Audigy 2 is a Dell OEM version, so even if Creative were to fix this, I would have to wait for a Dell specific version of the driver. Sorry for all the negativism, but I needed to vent...
    On the positi've side, I did discover a work-around that actually seems to work. I can enable the integrated sound on the mother board, connect the PCTV card to the integrated line-in and the head phone jack to the Audigy 2 line-in. Then configure PCTV to record sound from the integrated sound. This is not ideal, but again, it works

  • Problem with the new version of firmware for E72 a...

    The facebook application for E72 does not work with the new firmware version 031.023.
    The option key does not work and you not exit the application.
    I reinstalled the software and the result is de same.
    E61 - E51 - E90 - E71 - 5800 - E72 - E52 - E55

    gougher wrote:
    anan5002 wrote:
    same here.... but in my case... i have more problem. Sometime when open any apps, the keypad will become no responce...  which mean the  left menu "option" and right menu "exit / close" will not work.. This happen also when replying messages... none of the keys will work... enyone else having the same problem?
    Yes I'm having the same problems since the latest firmware update. Facebook "options" not working and cannot end app + OVI app does not allow you to proceed after you use the "search" option. Looks like the latest firmware has fixed some keypad problems but created some new ones. Come on Nokia address these issues as a matter of urgency. I will volunteer to test for you if you like because you obviously haven't tested the latest release properly as these are obvious issues!
    Got fed up waiting for Nokia to got off their bums and sort this. Ovi store is selling RoadSync5 for £8 - usual price £45! Also ironically had issues getting it download as per original post but if you search for RoadSync in Ovi (on the phone) then let the phone lights go out then click the joystick again the screen reformats and allows you to search. You will need to do the same with the actual purchase to enter your password - put the password in, click - nothing will happen, leave until the lights go out - screen has reformatted and you can click, then click purchase.

  • Is there a new Version of Skype for Business?

    Hi,
    I'm using Version 5.0.32.152 of what I think is Skype for Business. It's an approved version of the Windows Desktop program for my workplace, but I can't login using the Microsoft account I created based on my work e-mail. I only have the option to login using my Skype Name (but I don't know what it is).
    Is there an updated version for the Windows Desktop? I've spoken to my IT support team, but they suggested I reach out to the Skype Community about user names and account login details.
    This is the start-up screen I see, and it isn' the same as the new look Skype for personal use.
    Thanks for your help...Jonathan
    Solved!
    Go to Solution.

    The latest Skype version is 6.14.0.104
    http://download.skype.com/msi/SkypeSetup_6.14.0.104.msi
    The corresponding business version is 6.14.32.0.104
    http://www.skype.com/go/getskype-msi
    The only difference between the "normal" and the business version is that the business version does not contain options for integrating with Facebook and Skype Updater service is not installed.

  • Issues downloading Firmware for SRP527w

    Hi,
    I'm having issues downloading the firmware. When I agree to the "End User License Agreement" I get an error:
    JAMon Label=PageRenderMonitor, Units=ms.: (LastValue=2.0, Hits=820877.0, Avg=529.103072689331, Total=4.34328543E8, Min=1.0, Max=765237.0, Active=7.0, Avg Active=5.417805590849786, Max Active=36.0, First Access=Fri Sep 16 23:24:41 CDT 2011, Last Access=Mon Oct 03 19:38:53 CDT 2011) -->
    Can somebody at Cisco take a look so that I can successfully download the firmware update.
    Cheers,
    Petri

    Follow these steps to upgrade the firmware on the device: -
    Open an Internet Explorer browser page on your desktop computer that is hard wired to your router...In the address bar type - 192.168.1.1
    Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Is there a new charging cord available for iPhone 4S

    my phone is running hot, and I saw in Yahoo that there was a recall for the iPhone 4S charging cord.  Is this available at no charge?

    The recall is for chargers, not cables.
    http://www.digitaltrends.com/apple/apple-recalls-european-iphone-chargers-37-cou ntries-due-overheating-safety-risks/#!Z5wCi

  • ITunes tells me there is new software updates available for my nano and when I press update it tells me that iTunes could not contact the iPod software update server b/c I'm not connected to the internet (I know that I am or I could not submit this)?

    So anyone know why the iPod software update server connot connect to my PC when I know that I'm on the internet?

    If necessary, also see:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Any news concerning RPC1 firmware for superdrive UJ-867 ?

    i'm quite desperate and frustrated regarding my superdrive blocked on a spcific region after 5 changes...
    is there a way to unlock this drive ? (even with windows?)
    thanks

    No.

  • New Host Adapter plugin for Illustrator CC 2014?

    I'm seeing that the Host Adapter plugin for Illustrator CC does not work for Illustrator CC 2014.  I've checked that the AIHostAdapater.aip file is installed in the correct AI CC 2014 folder.  But calling AIEventAdapater.getInstance().pingPlugIn() always results in "pingTimedOut".
    Is there a new AIHostAdapater plugin forthcoming for Illustrator CC 2014?  Or is it available somewhere to download?  It is not available as an update through Extension Builder.

    Hi Brian,
    You can download the CC2014 host adapter plugins for Illustrator from the following URL
    https://github.com/timothybrandspencer/CEP-Resources/tree/master/host_adapters/illustrator
    Worked for me(verified of 64 bit installation of Illustrator on WIN and MAC), hope it works for you as well
    Thanks,
    Manan

  • Issue with authorizations for BPS

    Hi Experts,
    There was an issue with authorizations for BPS. We have a large number of agents that need to enter plan data via a layout. In order to control the necessary authorizations, we would like to filter via something similar to a user exit using a function module in order to avoid having to define authorization objects for each of the agents who have access to the systems. Right now, we are not sure if there is user exit concept available as it is for BW variables. Any body experienced similar issue may share their experience.
    Regards,
    Ankit

    Hi,
    In BPS, you can use user specific variables or you can set up a Variable of type exit. You can also have a variable of type authorization which uses the security / authorization of the BW system.
    Hope it helps...
    Cheers,
    Tanish

  • Where to get latest firmware for Zen Xt

    I have a 40GB Nomad Jukebox Zen Xtra with firmware version .20.08, which recently has been giving me "Firmware Problem" errors. I used to use AutoUpdate to get the latest firmware, but it no longer supports this device. I also don't see it in the list of devices on the suppport site. It's considered "End of Life" so I can't ask email Creative directly about it. What a pain.
    I tried the Zen NX (closest thing on the site to a Zen Xtra) driver .0, but when I run it it gives me an error saying "You cannot use this firmware upgrade for your player. Please download a suitable firmware upgrade."
    Does anyone know whre I can find the latest firmware Otherwise, I guess it's time to buy an iPod...
    -LloydM
    Message Edited by LloydM on 0-8-2008 :52 AM

    You should be aware that there are signifficant changes with upgrading ( or more apropiatly) changing your firmware version from one starting with a point somehting to a two point somehting firmware, and i would only advise you do it if you realy need to ( ie you need it to work on a windows Vista P.C)
    there is a .30.somehting firmware for that player somewhere ( i think) that shouldnt be such a huge change.
    goign to a 2.something firmware will:
    make the Zen Xtra an MTP device that you can drag n drop stuff to, and it will also help intergrate it with other programmes such as widnows media player on p.cs that dont have the drivers ( i think)?
    during the update process ( if it doesnt brick your Zen) everything on you hard dik will be completly wiped, all mucis, playlists and anny other files that you have stored on your player.
    ?As? with all firmware updates you should make sure that the battery is fully charged and the player is conected to the mains charger.
    Updating toa ver2.something firmware is only possible on a windopws XP machine, and that XP P.C must be checked to make sure its is free from windows media player and windows media player runtim, you need to go to the control panel and select remove? on WMP then roll it back to windows media player 0, re-boot your XP p.c, then go back to add/remove programmes, remove Windows media player runtime ( roll back to windows media player ) re-boot your p.c then with a bit of luck the firmware will uipdate to the latest version.
    In my opinion unless you realy want the Zen to act as an MTP device, and work on windows vista, theres not much to differentiate between the last ver firmware and the last ver2 firmware, read t6he link below ( if it still woks) and you should get an idea of the hassle i had when trying, then failing ( and eventualy suceeding) in updating the firmware on my Zen Xtra.

  • E72: Is there a new firmware for Nokia Messaging ?

    Hello,
    I have E72 and it has integrated Nokia Messaging. But when I look up Nokia's messaging website, It talks about additional functions like social networking as part of nokia messaging. Are these available for E72 ? I also see the newer Nokia phones,C3,C6 & E5 already have the new version of messaging softwware. Any idea if E72 will get these ?
    Thanks
    venks
    Solved!
    Go to Solution.

    Nokia Messaging is rather confusing as there are different components.
    There's Nokia Messaging Email which is built into the E72 email client (which is part of the firmware).
    Then there's Nokia Messaging for IM (aka 'Chat'), which you should have pre-installed as the 'Chat' app.
    Finally there's Nokia Messaging for Social Networks which is another separate app.
    If you go to http://messaging.nokia.com/ and select your phone, it will show you the services available in NM. You can't download the Email client as it's built into the firmware. You can download the IM app though to update the one built in (I think it may be available via Control Panel -> Phone -> Software Update on the phone also).
    NM for Social Networks isn't currently available for the E72 officially. It was available as a beta but it's been removed, I believe due to quality issues. I had downloaded it and frankly it was fairly rubbish.
    Personally, if you want an app for Facebook, you can do better getting the official Facebook app for the E72 (from the Ovi Store) and for Twitter get Gravity. The latter has some beta and alpha versions which also support Facebook (plus as GPS support and other features) which work great. Yes, Gravity costs money, but frankly it's well worth paying for as it's one of the best Twitter clients on any mobile phone.
    P.S. NM for Email can only be updated by a firmware update of the email client. There are newer versions of the email client for 5th edition as it's not integrated into the firmware. Unfortunately Nokia decided to integrate it on the E72 and these updates are not available to us. That means crucially we don't get Destinations support in the email client
    E72-1 UK CV 052.005

Maybe you are looking for