Is there a new naming procedure in 10.5.7?

Previous to 10.5.7, whenever I partitioned a drive using Disk Utility, the names I gave it were the names it had. I'm finding since 10.5.7, however, a numeral is added...if it's the first time the name is used a "1" is added; if it's a second time, a "2" is added. For example, I name the drive "Macintosh 2" but it is partitioned and named "Macintosh 2 1" without the "..". This added numeral is not visible on the desktop but if I try to use Accounts to move my home folder to that drive when I choose "Macintosh 2", it comes up as "Macintosh 2 1". I'm trying to copy my home folder on to a new harddrive but having problems with it being recognized and starting up correctly and discovered this by chance. Anyone else notice this? Is there a workaround?
Message was edited by: GRS
Message was edited by: GRS

found the answer.....there's a hidden folder in my os directory titled "Macintosh 2" which is why diskutility adds a '1' to it when I try to name a new partition "Macintosh 2". wonder what's in that folder....

Similar Messages

  • New Uninstall Procedure?

    Is there a new uninstall procedure for Final Cut Server 1.5?
    I need to remove all traces and figure out the command-line installation parameters using the installer command, but no matter what I do, it still sees pieces of the old install. It doesn't ask for a Serial Number, media locations, etc, and declares itself an 'upgrade'.
    I've already gone through and tried deleting everything at http://support.apple.com/kb/HT1764
    I'd really love to not need a complete reformat, but it seems like that may be the only option....

    That gets most of it, but after some digging, it appears with Final Cut Studio and Final Cut Server, the /Library/Application Support/ProApps folder no longer contains individual System ID files, but rather one ProAppsSystemID item that contains the key information for all ProApps, and is not an easily editable file. Looks like I'll have to uninstall the entire suite.

  • It came to my attention there a new program working with itune since last update named Apsdaemon.exe its been using 99% of my processor when its active any idea why so much and will it be fix eventually? And why is it so Heavy consuming ?

    It came to my attention there a new program working with itune since last update named Apsdaemon.exe its been using 99% of my processus when its active.
    Any idea why so much and will it be fix eventually because before last update i never encounter any issue using Itune? Now when that aplication or extention from Itune is working my computor froze to a huge alt. I play video games online and love listening to my music with itune playing in the background and normally was able to have firefox open and a program called ventrillo all working at the same time and now i can barelly have itune and play a game. As soon it start been choppy i just control alt delete wait 5 minute to close down apsdaemon.exe when i'm capable most of the time i have to restart my computor. And why is it so Heavy consuming on the process its memory utility is under the 100ko i believe so why 99% of my processus is been use ?
    a good exemple i could give is itune.exe working it shows process 02% for 123 000ko that is light and perfect.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • I installed LR 4 on apple lap top os x 10.7. since i was afraid to lose pics i first loaded into i-photo an then exported into LR on a previously opened catalog. for each new export procedure was repeated. now there are plenty of catalogs and LR cannot fi

    i installed LR 4 on apple lap top os x 10.7. since i was afraid to lose pics i first loaded into i-photo an then exported into LR on a previously opened catalog. for each new export procedure was repeated. now there are plenty of catalogs and LR cannot find some in LR. what now? answer in german or english. hobbymaler

    i installed LR 4 on apple lap top os x 10.7. since i was afraid to lose pics i first loaded into i-photo an then exported into LR on a previously opened catalog. for each new export procedure was repeated. now there are plenty of catalogs and LR cannot find some in LR. what now? answer in german or english. hobbymaler

  • Problem with new pricing procedure - free of cost

    i set up a new pricing procedure where i have zsed (special excise duty) and zmws (sales tax) set as manual, it's not valid on some free sample orders. but when i goto create order it does not show up under conditions, even though i've maintained it for that material in vk11. and when i click on condition type in conditions, it doesn't show up in the drop down either (at the order level). if i just type zsed it says zsed cannot be processed manually.
    but if i change the pricing procedure and take off the manual check mark, the tax shows up on the same order automatically (from vk11) but i can't delete it there.
    suggestions? i need for it to show up or have an option where if it shows up i can delete it. thanks!

    fyi,
    If you set the "Manual" indicator in pricing procedure against to any condition type, then you can enter this condition type value in particular transaction. ( But for this condition type details, " changes can be made- setting maintain as "D" not possible to process manuall). Same "manual" logic in the pricing procedure will not work.
                  Because controls in Condition type has priority than anyother.
    Now coming to your question,
               If I understood it properly,
    ZSED is not applicable to every free of cost order, but it may be applicable to other orders ( excl: FOC orders). Expecting ZSED Condition type maintained in both pricing procedures ( FOC sales pricing procedure & non FOC sales procedure).
    if you set the " Manual entries has priority"/ tick mark delete check box in ZSED, then it will allow to enter manually/delete the condition type in FOC order as well as non FOC orders too.
    Then there could be chance that user may delete/manually enter ZSED in non FOC sales.
    better way would be, create new conditiont table by including Sales document type ( assume you created new document type for FOC sales) with other required fields ( eg: customer/material etc..,).
    assign this condition table in top of all the accesses in ZSED's access sequence.
    Maintain Condition record.
    By doing so, Condition record is applicable only to FOC doc type sales- if maintained , else it will search next condition record.
    which will not effect the non FOC sales & user cant delete ZSED from non FOC sales.
    Hope it helps

  • How to replicate a new pricing procedure from SAP ERP?

    Dear Experts,
    I have set up a new pricing procedure in the ERP backend and I would like to replicate this to SAP CRM.
    A replication using object DNL_CUST_CNDALL has been executed once in the past.
    What would be the best way for me to download the new pricing procedure without overwritting any of the existing pricing settings in SAP CRM?
    Thanks,
    Dan

    Hello Dan,
    The views in CRM pricing customizing do not allow to change the pricing procedures, condition types and access sequences that have been downloaded from the ERP system. You will see a field in customizing Source System with value A indicating that these were not created originally in CRM and the view does not go to edit mode.
    In case a i.e. condition type had been created originally in CRM with the same name as a condition type that exists in the ERP the download of the adapter object will not delete the condition type that was created in CRM.
    Therefore it is safe to execute the initial download of the adapter object DNL_CUST_CNDALL without filtering. If you have many pricing procedures in the ERP and you do not want to transfer its customizing to CRM you can create your own adapter object by copying the content of DNL_CUST_CNDALL ( to be on the safe side and keep the original) and then add a filter in your adapter object ,for example in pricing procedures using field KALSM of table T683S, including all the pricing procedures that must be transferred to CRM u2013 those that were transferred in the past and the one that you want to transfer now .However this filter is optional, most SAP customers do not change the standard filters.
    The usual options are:
    -- Download only DNL_CUST_CNDALL (or a Z object that was created based on DNL_CUST_CNDALL) which contains client dependent and also  independent customizing ( i.e access sequences, condition tables).  Condition tables may be generated too and it can take longer, maybe up to 45 minutes or so.
    -- If you have made changes only to pricing procedure(s) or condition types u2013 client dependent customizing--  it will be enough if you download only DNL_CUST_PRC. As there is no generation of condition tables the download will be faster.
    But you must consider that you should not download both adapter objects at the same time ( overlapping times), as part of the content being downloaded is the same and the database will be inconsistent. This can cause errors in pricing, not a severe issue, as it can be solved by a new download of  DNL_CUST_CNDALL, but an issue that causes trouble as it is sometimes difficult to determine the root cause of the problem. So if you for whatever reason ( i.e. additional changes in a condition type) download both adapter objects you should always check R3AM1 and download the second object when the download of the first one has finished ( green light in transaction R3AM1)
    Best Regards
    Luis Rivera

  • NOT specify new DataSource for every new stored procedure?

    I'm in a solution where I'm having multiple reports, and I want to create my reports one at a time, create a stored procedure for it, then create a report for that stored procedure, then go on to the next report in the same way.  The problem is that
    in Visual Studio, the DataSource does not update to recognize the new stored procedure, so I have to keep creating a new data source each time.  Is there any way around this so I don't have to create a million data sources?

    Hi jiwakersm,
    I will answer your questions one by one:
    Report Builder vs Report Designer:
    • Report Builder is available in two versions: stand-alone and ClickOnce. The stand-alone version is installed on your computer by you or an administrator. The ClickOnce version is installed automatically with SQL Server 2012 Reporting Services (SSRS)
    and downloaded to your computer from Report Manager or a SharePoint site integrated with Reporting Services.
    • Report Designer in Business Intelligence Development Studio is a report authoring environment that is hosted in Microsoft Visual Studio.
    If we want to
    create an .rdlc report file, we should use ReportViewer control in an application project or a Web site. If we want to open an .rdlc report file, we should open the project or web site in Visual Studio. Note that Report Builder and Report Designer are not
    included in Visual Studio.
    As to the Report Data pane, we should click one report in the Solution Explorer, then select Report Data after clicking View button in the menu pane. The document said that “create a data source reference, and then select the new option.” means we should
    create a shared data source in advance (we can create it in Solution Explorer), then use it as data source. If you are create .rdlc report in Visual Studio, we couldn’t create shared data source. But we can create one data source, then use it to create several
    reports in the same project.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • FreeHand installation - New activation procedures

    Take note that are new activation procedures for Macromedia software installation.
    “When trying to activate your Creative Suite 2, Acrobat 7, or Macromedia products you may receive an error that the Activation server is unavailable.  As of December 15th [2012] the activation servers for these products will be shut down.”
    http://forums.adobe.com/thread/1114930
    How to activate new installations of Macromedia branded products:
    http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
    Judy Arndt

    Thanks for your fast answer.
    I have not been able to run once the program. I installed it and when I lauched it I get a message saying that the Key Code is missing or has expirated (altough I just installed it!). Then I input the one I got in the installation pack and it says it is invalid.
    I followed your instructions, but in the register there is no folder "Xcelsius".
    On the contrary, I have seen that although I desinstalled the version Crystal Xcelsius Professional, I still have a folder with in the register (Suite 11.5 --> Crystal Xcelsius Professional) with the serial code from the previous version. And I also have a folder in c:\Program files\Business Objects... is this ok? Could it be the reason for the problems? Isnt't it removed when desinstalling Crystal Xcelsius Professional? Should I remove it manually?
    Another thing: I already downloaded from your site the SP 1: cx2008_sp1
    When running the Setup first it desinstalled Xcelsius Engage and then it installed the SP1, is this also ok? Seems a bit strange...
    Thanks for your help!
    Regards,
    Nuria

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • HT5731 Is there a new trick to buying more than one song at a time?

    In the past I've bought more than one song at a time, its nit working though. Is there a new trick?

    If by "in the cloud" you mean iTunes purchased tracks, deleting them from the device will not impact that. You will be able to redownload them later. To clear all tracks from the Music app: Settings app > General > Usage > Manage Storage [under STORAGE] > Music > All songs [swipe to the left] > Delete

  • E72: Is there a new firmware for Nokia Messaging ?

    Hello,
    I have E72 and it has integrated Nokia Messaging. But when I look up Nokia's messaging website, It talks about additional functions like social networking as part of nokia messaging. Are these available for E72 ? I also see the newer Nokia phones,C3,C6 & E5 already have the new version of messaging softwware. Any idea if E72 will get these ?
    Thanks
    venks
    Solved!
    Go to Solution.

    Nokia Messaging is rather confusing as there are different components.
    There's Nokia Messaging Email which is built into the E72 email client (which is part of the firmware).
    Then there's Nokia Messaging for IM (aka 'Chat'), which you should have pre-installed as the 'Chat' app.
    Finally there's Nokia Messaging for Social Networks which is another separate app.
    If you go to http://messaging.nokia.com/ and select your phone, it will show you the services available in NM. You can't download the Email client as it's built into the firmware. You can download the IM app though to update the one built in (I think it may be available via Control Panel -> Phone -> Software Update on the phone also).
    NM for Social Networks isn't currently available for the E72 officially. It was available as a beta but it's been removed, I believe due to quality issues. I had downloaded it and frankly it was fairly rubbish.
    Personally, if you want an app for Facebook, you can do better getting the official Facebook app for the E72 (from the Ovi Store) and for Twitter get Gravity. The latter has some beta and alpha versions which also support Facebook (plus as GPS support and other features) which work great. Yes, Gravity costs money, but frankly it's well worth paying for as it's one of the best Twitter clients on any mobile phone.
    P.S. NM for Email can only be updated by a firmware update of the email client. There are newer versions of the email client for 5th edition as it's not integrated into the firmware. Unfortunately Nokia decided to integrate it on the E72 and these updates are not available to us. That means crucially we don't get Destinations support in the email client
    E72-1 UK CV 052.005

  • Creation of a new pricing procedure by copying existing one (for sale order

    Hi,
    Existing pricing procures are here below:
    1000     10     00     1     1     ZBRI01     Pricing Proc_Under Con                            1000     10     00     1     2     ZBRI02     Pricing upgradationFlat                           
    Now I need to create a new pricing procedure for the following combination :
    1000     10                 00                 1                     3                   ZBR103        Pricing_single sale
    Please let me know the steps to follow.
    With regards,
    Parijatha

    Dear JP,
    Based on your last direction,  I created a pricing procedure.  It is hitting the right GL and everything looks ok.  My problem is " ZCAR (car park value which is a  ZFREE item  should get added to the "Net value"  which is not happening.    Control data -reference step overview is herebelow.   From step 50 to 300 all are ticked for Statistics.
    50     0     ZBAV     Base Value for Calc     0     0               0     0     0
    110     0     ZTCO     Apartment Value     0     0               0     0     0
    115     0     ZDSQ     Discount on ApT     0     0               0     0     0
    120     0     ZDVA     Discount on ApT_Lump     0     0               0     0     0
    150     0     ZTGR     Terrace/garden Stat     0     0               0     0     0
    160     0     ZDTG     Discount on Terrace     0     0               0     0     0
    210     0     ZCAR     Car Park (booking)     0     0               0     0     0
    250     0          Total Consideration     110     210               0     0     0
    270     0     ZGOV     Govt Rate_Reg     0     0               0     0     164
    300     0          Upgradation Value - Billing     250     270               0     0     0
    310     0     ZBLD     Building - For Bill     270     0               0     0     164     ZBB
    320     0     ZSDT     Reg and Stamp Duty     0     0               0     0     0     ZSD
    330     0     ZSDA     Stamp duty-Agr-Sell     0     0               0     0     0     ZSA
    340     0     ZECH     Power Consump. Chgs     0     0               0     0     0     ZEC
    350     0     ZLFE     Legal Fees     0     0               0     0     0     ZLF
    360     0     ZPTX     Property Tax     0     0               0     0     0     ZPT
    Can you please help me what should I do to add ZCAR (item category is ZFREE) value to  Net value.
    With regards,
    Parijatha

  • How we can configure new pricing procedure at the time of billing document

    Hi SD Gurus,
    Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
    Thanks & Regards,
    Sreenivas.P

    Hello,
    Why?
    The sales order confirms the price given to the customer.  If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
    Regards
    Waza

Maybe you are looking for