Is There A Noise Reduction Plug-in For FCP?

Wondering if I could find a plug-in for FCP5 or Color that will reduce the noise shot with high ISO in low light. Does anyone have a suggestion. Thanks!
Message was edited by: sburst7

I have found the 'Noise Reduction' in the CHV repair collection for FCP to be the best out of anything that I have ever tried. The noise reduction is fantastic and the sharpness loss is the best out everything I have seen.
http://www.chv-plugins.com/cms/Fx-Script/Repair-collection/Repair-collection.php
The default settings can be a little excessive, I almost always end up with a setting of 10 and 15 regardless of the footage.
Also, you can try grain reduction inside of colour - pair it with a vignette and alpha blend to limit it to specific areas.
Cheers,
Liam.

Similar Messages

  • Allow integration of Noise-Reduction plug-ins to ACR

    My experience is that the noise reduction plug-ins like Neat-Image, NoiseNinja, etc. are significantly better than NR in ACR 5.x. The marketing material about LR-3 (ACR-6) touts that NR is better, that my limited experience with the LR-3-beta is that its NR is stll underwhelming.
    My budget is limited ... it stung to spend big bucks on CS4, then about $70 on Neat Image 6.1 because ACR 5.x NR was, IMO, inadequate.
    I'm not an ACR/CS4 expert, but my impression with high ISO pictures is that you want to do sharpening near the end of the workflow, especially after NR. I would like to use the much improved sharpening (and Clarity) that is available in ACR 5.x, but that detracts from the effectiveness of the NR plug-in, especially for high-ISO pictures.  It doesn't seem to matter that much with low-ISO DSLR images.
    I would appreciate the Adobe PS team working with the the NR plug-in vendors to give them a "hook" into the ACR pipeline. Their plug-in would be invoked by the ACR "engine" at the appropriate point in the pipeline, perhaps very early even before White-Balance and exposure/brighness/contrast adjustments.
    In a batch of "sync-all", my impression is that you want NR to act on the "raw - raw" image before any exposure or contrast adjustments. When you increase exposure for an underexposed image, the shadows becomre noiser, and this can throw off pre-built noise profiles (as least that is my experience with Neat-Image 6.1).
    My preference is to do as much of the Post-Processing as possible in ACR for images that don't need layers. That way I can minimize use of PS when appropriate. At this time, I find myselft invoking PS for all images to do NR.
    But perhaps I'm mis-informed (wouldnt' be be first or last). I've had email correspondence with the Neat-Image support person (also may the be developer?), and my understanding is that such as "hook" isn't available.
    Of course, the really preferred suggestion would be for ACR to have as good or better NR as the plug-ins, but until then, it would be appreciated for Adobe CS4 to be more "plug-in friendly".

    My experience is that the noise reduction plug-ins like Neat-Image, NoiseNinja, etc. are significantly better than NR in ACR 5.x. The marketing material about LR-3 (ACR-6) touts that NR is better, that my limited experience with the LR-3-beta is that its NR is stll underwhelming.
    My budget is limited ... it stung to spend big bucks on CS4, then about $70 on Neat Image 6.1 because ACR 5.x NR was, IMO, inadequate.
    I'm not an ACR/CS4 expert, but my impression with high ISO pictures is that you want to do sharpening near the end of the workflow, especially after NR. I would like to use the much improved sharpening (and Clarity) that is available in ACR 5.x, but that detracts from the effectiveness of the NR plug-in, especially for high-ISO pictures.  It doesn't seem to matter that much with low-ISO DSLR images.
    I would appreciate the Adobe PS team working with the the NR plug-in vendors to give them a "hook" into the ACR pipeline. Their plug-in would be invoked by the ACR "engine" at the appropriate point in the pipeline, perhaps very early even before White-Balance and exposure/brighness/contrast adjustments.
    In a batch of "sync-all", my impression is that you want NR to act on the "raw - raw" image before any exposure or contrast adjustments. When you increase exposure for an underexposed image, the shadows becomre noiser, and this can throw off pre-built noise profiles (as least that is my experience with Neat-Image 6.1).
    My preference is to do as much of the Post-Processing as possible in ACR for images that don't need layers. That way I can minimize use of PS when appropriate. At this time, I find myselft invoking PS for all images to do NR.
    But perhaps I'm mis-informed (wouldnt' be be first or last). I've had email correspondence with the Neat-Image support person (also may the be developer?), and my understanding is that such as "hook" isn't available.
    Of course, the really preferred suggestion would be for ACR to have as good or better NR as the plug-ins, but until then, it would be appreciated for Adobe CS4 to be more "plug-in friendly".

  • Is there a good motion tracking plug-in for FCP-X?

    The question is in the headline:  Is there a good motion tracking plug-in for FCP-X?
    You know, like when I want to blur out, say, a license plate number on a moving car.
    I know of no plug-ins for FCP-X that will do this.  Surely there's one out there.
    And since you can't just export a sequence to Motion (like you could in FCP 7), how would one achieve this in FCP-X?

    R&B wrote:
    … And since you can't just export a sequence to Motion …
    instead of selecting a clip or sequence in FCPX, you set the in/out points in the Export/Send it to Compressor dialog.
    the exported mov can be tracked in Motion5 …-
    aaaand finally re-imported into FCPX.
    … not exactly as convenient as in the old FC/p , but the tracker in M5 offers, imho as a hobbyist, superb results.-

  • Free fish-eye reduction plug-in for PS CS3?

    This article http://photo.net/learn/fisheye/ talks about a fish-eye reduction plug-in for PS called Panotools. I follow the link but I don't see the particular tool. Any recommendations on a plugin, or how to do it in PS CS3?
    -Zilla

    PTLens is a Photoshop plug-in that can be used to de-fish images to a great degree:
    http://epaperpress.com/ptlens/
    It's main use is to remove pincushion and barrel distortion for lenses it knows about, but it has a fisheye mode.

  • I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

    I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

    Try
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Free plug ins for fcp

    so a few have suggested a couple free plug ins for the garbage point masks, and i do apreciate it, this question is in regards to free plugins in general.. how safe are they and the sites there found on? what are the chances ill ruin my new mac by putting them on my system, sorry to ask so much but im just trying to learn as i go,
    thanks in advance
    Brucey Bizzit

    Many of the posters here author them -- some without cost and some sold.
    Are the sites safe? From what?
    Never heard of a plug in for FCP ruining a computer. If they don't work or cause issues, just trash them
    Google: "free Final Cut Pro plug ins"
    http://www.google.com/search?client=safari&rls=en-us&q=freefinal+cut+proplugins&ie=UTF-8&oe=UTF-8

  • How do you install "Twixtor" excellent Slow Motion plug in for FCP

    Hi,
    I have the Twixtor FxPlug Pro v5.0.1 but can't get to install it properly.
    I have seen some posts in the web but for me there is no clue how to install it.
    The installer installs it in the root of HD folder, but later they say you have to "move" it where the plug ins for FCP are.... which I don't know....
    The only links I found of help, but in my case I could'n solve it, were:
    http://www.cinema5d.com/viewtopic.php?f=24&t=21416&start=0&st=0&sk=t&sd=a
    http://discussions.apple.com/message.jspa?messageID=3188319
    Any one can help with this? THANKS!

    installation instructions are all on there web site:
    [plugin installation|http://www.geniusdv.com/newsand_tutorials/2008/01/where_to_put_plug_ins_in_final_cutpro.php]

  • How to build a plug-in for FCP

    I want to build an export plug-in for FCP. It is a little similar to Automatic duck export plug-in. I want to export sequence in my own format.
    The version of Final Cut Pro is 6.0.
    I downloaded FxPlug SDK, but it is only about video effect, not what i want.
    And I didn’t find any other documents about how to build an export plug-in for FCP.
    Who has some related documents or can support me on this?
    I will pay for the help if i can afford it.

    I don't own Automatic Duck so I don't know how that particular application goes about doing this, but the only way I can think of doing it is through a QuickTime Export Component.
    http://developer.apple.com/documentation/QuickTime/Rm/ImportExport/DataExchange/ A-Intro/chapter1_section1.html

  • Flash frame plug-in for FCP

    Hello,
    maybe somebody has a flash frame plug-in for FCP and could share it with me?

    yes.
    if you go here - http://www.mattias.nu/plugins/ you can download a FREE bundle of excellent fliters/transitions... one of which is a superb flashframe transition... i use it all the time!

  • Is there an Apple Quicktime Plug-In for Waterfox?

    Using Windows 8 RP and Waterfox 64-bit browser...Apple Quicktime is installed...but no Plug-In appears in the Waterfox list...is there a compatible plug-in for Waterfox?

    Did you ever find an answer to this question? I am looking for the same answer.

  • Canon T4i and can't load RAW photos into Photoshop 5.1. Is there an extension or plug in for this?

    The question says it all. Trying to load my RAW pictures from my Canon T4i using Photoshop 5.1. It says it does not recognize this version of RAW. Help?
    Is there an extension or Plug in?
    I remember it used to work until I did an update.

    Photoshop 5.x is ancient, from last millennium.  I'll assume you meant Photoshop CS5.1.
    The highest version of ACR, the Adobe Camera Raw plug-in, that will run on Photoshop CS5.x, is ACR 6.7.
    The Digital Rebel T4i = EOS 650D = EOS Kiss X4i was supported by ACR for the very first time in ACR 7.1, which needs at least Photoshop CS6 to run.
    Your recollection is faulty.  You will never be able to open raw files from that camera directly from CS5.1.
    You need to look for, download and run the free, standalone Adobe DNG Converter 8.7.1 on each and every batch of Canon raw files from that camera in order to convert them into raw DNGs that you can open in your versions of Photoshop and ACR.

  • Does anybody know if and when there will be a plug in for raw files from the Nikon D810? I have lightroom 4

    I am considering buying a Nikon D810 but I do not want to be waiting for ages for a plug in for it's RAW files on my Lightroom 4. Does anybody know if and when there will be a plug in? I presume the 8.5 plug in will not cover the cameras Raw file.

    There is no plug-in for Lightroom 4 that would ever give you support for the new camera. Lightroom does not use Camera Raw. Camera Raw is a plug-in for Photoshop and Photoshop Elements. If you want support for your camera in Lightroom you will need to upgrade to Lightroom 5, and then wait for the 5.6 update which should be available within next few weeks (unless Lightroom 6 is introduced). In the meantime you can use the DNG converter (version 8.6 RC) to create DNG copies of your raw images that you would be able to open in Lightroom 4.

  • Now that HD DVD is dead, is there a Blu-Ray plug-in for compressor 3?

    Just wondering if any third party folks have provided a plug-in for compressor 3 (similar to something like Flip4Mac) that would allow burning to Blu-Ray media?
    Thanks, Rob.

    Jon,
    I think the rush will start and it will be very much like VHS to DVD. I already know many friends whom I would consider NOT "into" movies, TV, electronics and for the first time they're upgrading from standard TV set to the now very affordable 1080p HD TVs and look to pick up a 1080p DVD player just cause they now have a TV that can do HD. A lot of new owners are wanting to "expose" the true quality of their HD TV and no better way to do that than with a HD capable player. Go to retail stores (BestBuy) and you'll be amazed at how many folks are walking the Blu-Ray section -- people you'd not expect to see, like a Mom with her 2 you kids looking at Walt Disney titles. It's happening and it's happening now.
    As far as upgrading ones entire DVD library, I agree, probably only the really good ones will be duplicated.
    Also agree that Blu-ray is another temporary format that will last maybe 10 years or so. However, we'll need a significant US network upgrade before we can support everything being distributed over airwaves and wires. Our current US network infrastructure is too weak to support elimination of hard copies. Just look at folks like Comcast, DirectTV, Dish, etc. -- their HD content is seriously compressed and it shows. Still way better than SD, but broadcast HD vs. blu-ray HD and the difference is obvious, blu-ray just destorys broadcast HD in image quality (especially when it comes to motion).
    Rob

  • Is there a Fetch (FTP) plug-in for Aperture

    Does anyone know if there is a FTP (fetch) plugin for Aperture?

    Fetch directly ... nope ... don't think so ... i'd love it though ...
    but there is this one:
    http://www.apple.com/downloads/macosx/aperture/aperturetoftppro.html
    this is a different way of sending:
    http://www.apple.com/downloads/macosx/aperture/yousenditpluginforappleaperture.h tml

  • Matching Shot Plug in for FCP 7???

    HI,
    Is there a piece of software or 3rd Party Plugin that lets you match one shot to another?
    I have a wedding ceremony that was shot with 2 cameras. The main camera looks great. The color is fine.
    The second Camera, B-Roll footage, looks a little off. I want to make it look like the 1st camera does.
    In Premiere Pro they have something called RE:MATCH which will match one clip to another clip.
    I was wonderng if you can get a plugin like this for FCP 7?
    Thanks.
    FCP 7
    Mac Pro
    Intel Xeon
    10 Gb RAM

    FCP has had 'Match Hue' in the Color Corrector 3 Way since version 4.5.  Here's how to use it: http://www.kenstone.net/fcp_homepage/match_hue_fcp_5_balis.html
    -DH

Maybe you are looking for