Is there a nudge or move key? for sound clips?

I am trying to sink (right spelling?)screams to a video... Exactly in place. I am using the multitrack viewer and zooming in, but cant seem to nudge the sound clips that tiny bit, .. is there a nudge key?

hey there anita,
you can use the arrow keys or magnify/zoom the timeline(i think in the lower left corner) to make it easier to slide clips around to where you want them.
good luck.

Similar Messages

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Extending keyframes for sound clip

Hi,
I'm using Flash CS4, and I cannot figure out how to extend
the keyframes for a sound clip to run the length of the timeline.
How can I do this with ease in CS4? In previous versions, after you
drop the sound clip onto the stage, it appears in the time line but
stops at a certain keyframe even though the sound clip is much
longer than what's appearing visually. Typically, you click the
last keyframe, hold down and then drag and continue to do so until
your sound line "runs out". CS4 won't let me do that, it skips a
load of frames and then starts up again.
I need to view the entire sound clip on the timeline; how?
Thanks!

Hi
I convert all to
• .aiff 16-bit 48kHz - or -
• .aiff 44.1kHz (Audio-CD) - THIS Especially when needing Audio from iTunes ! ! - as this cut's of the DRM flag which often results in mute DVDs when not excluded.
I do not use any .mp3 or Direct from iTunes as they most often give me problems - but converted to .aiff they work greatly.
Yours Bengt W

Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

Hi all,
There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
ps.
For Windows:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma
For Macintosh:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma

Hi,
I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
Creative, you have to reupload the files on your webserver.
Download done with XP and IE8.
Bye.

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Account modification key for movement type 643

Hello Experts,
I am reaching out to you today as I am in need of some info on Account assignment for Goods issue process. I looked at transaction OMWN or OMJJ for movement type based settings. I am running a business process ' Intercompany stock transfer order'. Goods issue movement on delivery reads 643(Goods issue for cross company), which is picking 'Account modification key' VAX.
My requirement was how do I force system to pick VAY for 643 without overwriting VAX with VAY in OMWN transaction. Also there are several possibilities listed out for movement 643 alone. Appreciate if you could briefly tell me how system determines other parameters such as 1) Special stock indicator 2)Consumption posting 3) Value string & 4)Counter to determine 'Account modifier' in the customizing table V_156X_KO for Intercompany movement type 643.
Additional info: Trigger is Stock tarnsfer order type NB. Subsequent process is VL10B for Delivery creation using type NLCC and Intercompany invoice(IV) for shipping the goods to ordering company code. Then in the receiving company MIGO or goods receipt with reference to outbound delivery and fianlly MIRO or Invoice verification.
Regards
SG

Valuation Structure
Data on a material is valuated using the following structure:
Valuation area
Valuation class
Valuation category
Valuation type
Material type
Movement type
Valuation Area
Organizational level at which material valuation is carried out. You can define a valuation area as
follows:
Valuation area = company code
All stocks of a particular material in this company code are valuated together.
Valuation area = one plant
The stocks of a particular material in this individual plant are valuated together. Stocks in
other plants are not included in this valuation area.
You define in Customizing the level at which valuation should take place.
Valuation Class
You group together different materials with similar properties into valuation classes so that you
do not have to manage a separate stock account for every material.
The following table contains examples of possible valuation classes:
Valuation class Description
3001 Colors
3002 Paints
3030 Operating supplies
3100 Trading goods
Which valuation class a material can be assigned to depends on the material type. You can
define the following assignments in Customizing:
All materials with the same material type are assigned to just one valuation class.
Different materials with the same material type are assigned to different valuation classes.
Materials with different material types are assigned to a single valuation class.
MM - Material Price Change (MM-IV-MP) SAP AG
Valuation Structure
10 April 2001
A material is assigned to a valuation class in the material master record. The system checks
whether the material type allows the material to be assigned to the valuation class specified.
The system refers to the valuation class of a material to determine which stock account to post to
when a posting is made for this material.
Valuation Category
Criterion according to which split valuation is carried out:
Procurement
You can valuate a material differently depending on whether it is manufactured in-house
or procured externally.
Origin
You can valuate a material differently depending on where it comes from (such as home
or abroad).
Status
You can valuate a material differently depending on its status (such as new, used,
repaired).
You define the valuation categories in Customizing. A material is assigned a valuation category
in the material master record.
Valuation Type
The valuation type specifies the individual characteristic of the valuation category, such as
internal or external, in the case of Procurement. Within the valuation category Origin, you can
define the different countries as the valuation types. You define valuation types in Customizing.
You first determine all the valid valuation types for a valuation category.
You define in the material master record which valuation types are allowed for a particular
material. For every material subject to split valuation, you must enter all the valuation types
allowed in the material master record.
Material Type
You assign every material to a material type when you create it. Examples of material types in
the standard system include raw materials, operating supplies and finished products.
The material type controls the properties of a material and which data must be maintained for the
material. The following control features are important for valuation:
Is the material managed by quantity?
Is the material managed by value?
Which price control type may be used for the material?
Which valuation class can the material be assigned to?
The system administrator can create or change material types in Customizing.
Movement Type
For every material movement, there is a movement type in the SAP System. The movement type
controls the properties of the movement, for example, which entries you must make when
SAP AG MM - Material Price Change (MM-IV-MP)
Valuation Structure
April 2001 11
entering a material movement, and which updates are carried out when the movement is posted.
The following control features are important for valuation:
Does the material movement cause the quantity to be updated?
Does the material movement cause the value to be updated?
Does the material movement lead to postings in Accounting?
Is the material movement relevant for LIFO/FIFO valuation?
The system administrator can create or change movement types in Customizing.

Adobe After Effects CC Doesn't recognize Alpha Key for imported DNxHD (.mov) clips

After Upgrading To Adobe CC, we faced a problem when we try to import our HD assets (Quicktime .mov Codec: DnxHD 1080i 120). they are imported as one layer.. there NO Alpha key.
These Clips dont have such problem when we import them into Adobe After Effects CS6.
Please Adobe, we need a fast solution. this is urgent.
Note that we tried to download the last version of AVIDCodecLE package with no result!
thanks for any idea.

ADOBE - THIS IS ABSURD - FIX THE DAMN BUG
Our studio waited until now to update - what a huge mistake, waste of money, waste of time. Fortunately, older versions still run fine on the systems we "upgraded".
We have years of assets that no longer work correctly in CC or CC14. We are a major production studio with literally thousands of assets that exist in a multi million dollar ISIS system. CC and CC2014 are worthless until this gets fixed. I'm sitting here looking like a amateur because nothing works. THANKS GUYS! - No, we're NOT going to go back and "re-render" all of those assets. We will just continue to use the no monthly fee Cs6, forever.
We will not be renewing any of our "contracts" until this bug is fixed (about 30 licenses). Back to CS6.

NOKIA N96 LOST LICENCE KEY FOR TRANSFORMERS MOVIE

how can i get back the licence key for my NOKIA N96.

@licens
You would have needed to backup N96 including mass memory using Nokia Suite to have retained the license. As Nokia Care facility only have obligation to restore device to latest firmware version, there is no possibility of getting this license back unfortunately and the movie will remain locked.
Happy to have helped forum with a Support Ratio = 42.5

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

Is there a way to move files on to my EHD (previously used for windows)

I have a macbook air. I have always used windows laptops and therefore my EHD, which has all my pictures on it, is not for mac. Is there any way to move all my pictures from iPhoto to my EHD? I have tried exporting and dragging them and it just does not work. I would hate to have to have all my pictures on two separate EHD's. My husband uses a Windows laptop so I'd like us both to be able to use it. I understand you can partition them but It is already so full of stuff, i don't want to have to wipe it.
Can anyone help?

How is the EHD formatted? For it to be used by the Mac and Windows it needs to be FAT 32 (DOS). If it is FAT 32 then you can export your photos out of iPhoto to folders on your Desktop and drag those folders to the EHD for storage.
If the EHD is formatted NTFS you'll need 3rd party software in order to be able to write to the disk.
You cannot copy an iPhoto Library to the EHD. Any format other than OS X Extended (journaled) will corrupt the library.

Is there a key for entering text on ipad mini for the schwa symbol?

Is there a key for entering text on ipad mini for the schwa symbol?

You're welcome.
It is possible there is an app containing a phonetic keyboard in the app store (or not). I haven't had use for one, so have never checked. Using it would require some copy and past on your part. But it might worth a search.
Oh, just to be clear (should have googled and not trusted my aging memory) you're basically looking for an upside-down "e", right?

Is there a quick key for flatten image?

Is there a quick key for flatten image in photoshop?

You can assign a shortcut to the Flatten command (I use Alt+Shift+Ctrl+A) in the Keyboard Shortcuts.

Is There a List of Keyboard Shortcuts for Adobe Digital Editions, I Found Two By Accident the "Arrow" Keys and the "Enter Key" for Turning Pages in an eBook...

Hi ?? : Does Anyone Know If There is a List of Keyboard Shortcuts for Adobe Digital Editions, I Found/Discovered Two By Accident the “Arrow” Keys and the “Enter Key” for Turning Pages in an eBook... Thanks
I Did Look for this Keyboard Shortcuts in Adobe Digital Editions Help & FAQ Areas and Got the Run Around, Very Hard to Find How Use Adobe Products !!
Microsoft Windows Vista & Win 7 Operating Systems
Message was edited by: Al Adams

Nope, I doubt it. As I said:
I disabled Aero theme, checked font scaling was 100% and rebooted Windows in between all of the steps to no avail.
I've been reading a lot around this and it seems the arrow key problem is a red herring; I think it's just some kind of terminal preferences corruption.

Is There a Shortcut Key for Change/Find ?

Hello and thanks in advance,
Using the InDesign CS-5 Find/Change feature, I am always using the Change/Find button.
*** Is there a way to create a shortcut key for this option, Change/Find ? ***
Since I use it so often, it would be good if it could be one of the "F" keys: F1, F2 or whatever.
I looked under "Edit --> Keyboard Shortcuts" ... but I could not find the option Change/Find there. Did I miss it ?
Thanks again,
Zorba

Here is what I have now done, based on the suggestions above:
http://i150.photobucket.com/albums/s90/robinwhitman/tech_support/id-edit-keyboard-shortcut s.jpg
As you can see from the screen shot above,
I have opened up the Keyboard Shortcuts Menu,
Product Area: Text and Tables
In the Commands window I have selected:
=====================
Grep Replace wth Change to text and Find next
==============
Now at this point, suppose I want to make the shortcut to activate this, the F4 key.
I click to put the cursor into the cursor into the box that says, New Shortcut
and then if I press "F4", it seems to be already taken by the Snow Leopard OS ... on my screen appears the Weather, calculator, calendar and clock.
So I cannot assign the key and create the shortcut.
Am I close to the goal here, or am I on the wrong track ?
Thanks ... Zorba

Hi, I'm in Ireland, and there is loads of movies I want to rent, but don't have the rent option. For example Avengers assembly, Sherlock Holmes game of shadows, safe house,and loads more. Why is this?

Why are all the movies in I tunes store not for rent in Ireland. There are loads of movies I want to rent for example Sherlock Holmes game of shadows, Avengers Assembly, safe house, and loads more. All of these are on DVD so why can't we rent them.

Not all movies are available for rent all of the time, licensing will dictate when rentals can be made available.

Is there a nudge or move key? for sound clips?

Similar Messages

Maybe you are looking for