Is there a one page summary of all routing decisions made by CUCM?

I'm thinking a nice diagram detailing all algorithms that can be used by CUCM to route calls and transmogrify digits. I just want to see it all in one place, and you know it can fit on one page.

What Mr. Steak and eggs is probably saying is that there are multiple ways and levels to do dialed number and "dailing number" manipulation. As he stated, yes old world call routing was based on TP>RP>RL>RG>Gateway, Css parttition etc etc.(and essentially, it still works that way) . But, and especially with the introduction of Local Route Groups, it has become more complex and granular.
I would love to see a visio that would summarise all the options (possibly a challenge i would take up on myself). For now Mr. Steak and snags, your best place for information that would cover all the options; Cisco's SRND. so the answer to your question is: NO
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Similar Messages

Recently - every time I open one page with Firefox - all the pages that are minimized open with it? This never happened before and is VERY annoying? Can I fix

If I have multiple windows open but minimized THEY ALL open each time I bring up either a NEW window, or one of the minimized ones? This is new - and terrible as it increase research time by 50% of more!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

One page displays as negative image when saving PDF to reduced size in Preview

Imac Intel Mid 2007
OS X 10.5.8
Preview v4.2
I have a multi-page PDF I'm trying to save to a reduced size.
The document was constructed of separate pages, some of which were created as Photoshop PDFs in Photoshop CS4 and others were saved as PDF's from Word. After moving over the individual PDF's to the side bar, the document saves fine in Preview at full size. When I use the quartz filter to "Save As" "Reduced File Size" one page saves as a negative image and the others are all fine.
One suggestion I saw in a similar thread was that the mode in PS might be CMYK, however it is not and it is RGB.
Any help as to solving this would be greatly appreciated.

n.gilbert wrote:
If I select all pages 'save as' will only save out one page and not all.
JPEG is single-page.
If I print and choose 'pdf to jpeg'
Elaborate, please.
Is there a way to save to pages out in one go to jpeg where I can adjust the dpi setting?
Yes. Build an Automator workflow using the PDFs > Render PDF Pages as Images action.
Once I have the reduced jpegs it's easy enough to reimport into preview and save as a pdf.
If the desired final output is multi-page PDF, no need to go through all that. You can do the task in Acrobat Pro (PDF Optimizer), or in Preview (Save as > PDF > Quartz Filter). If the current Reduce File Size filter doesn't provide satisfactory quality, use ColorSync Utility to duplicate it (or make a new filter from scratch) and adjust it to fit your needs.

How to keep a table on one page

Hi,
Is there any way to prevent a pagebreak in a table?
If a table is selected, then the Inspector-Text-More-Pagination&Pagebreak is grayed out.
I tried Inspector-Wrap-Object Placement-Floating, which indeed keeps the table on one page, but has all kinds of nasty side-effects. I really need to keep the table inline.
Thank you!

Archon,
In the Wrap Inspector, change the Table's property from Inline to Floating. Now you can position it on the following Page and avoid the split. Be careful though, because now you are fully responsible for the table position on the page and it will not split even if it grows larger than a page in length.
Jerry

Summary for all Profit Centers in the Profit Center Report

There should be a summary for all Profit Centers in Profit Center Report. Now there is only summary by Sort Code but should be also summary for all Sort Codes.

Alex is right if we are dealing with R/3 and thats not the way you look in BW.
normally org. levels are not used in BW. unless you created one using ORG_LEVEL_CREATE( normally nobody does that in BW or may be I never heard of it).and that is the reason we create RSR objects. so if you look in AGR_1252
with VARBL $PRCTR you won't get anything.
$PRCTR might be your custom field I guess. Identify the RSR auth. objects which has this field. you already mentioned you did that and you have 6 auth. objects.
you might have made 0PROFIT_CTR as auth. relevant and created those 6 RSR auth.objects.
To get the list of roles where those RSR objects getting used and the profitcenter values in those roles, I would say goto AGR_1251, and in OBJECT field give your 6 RSR objects in the multiple selection tab which you can see on the right side of that field. you will get the list.
regards
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli

How can i change orientation of one page in a document of PAGE 5.0

Hi im new using Page's 5.0. Im creating a documents put i need to insert picture and i want to change the orientation of one page, not for all documents. Trying to do this is a problem...
Please somebody could help me.
Thanks

Afraid not... except that Pages 4 is still in an iWork folder within your Applications folder. You can use that to get work done.
Please also let Apple know at:
http://www.apple.com/feedback/pages.html

Is there a way to view all favorites on one page from different albums?

is there a way to view all favorites on one page from different albums?
I can't seem to figure out how to view all favorites at one time.
nothing (thus far) is shared.
paid membership to revel, also.

oops - apparently you can do this from the app,
but not from the web login view.

Is there a way to have one flash player play all moives on a web page ?

Hi,
Is there a way to have one flash player play all movies on a web page ?   For example, you have a list of FLV movies on a page and you click on any them and it will play on the same player on the web page. Or does each movie needs it's own ?
Thanks in advance..
Peter

Yes, for the design I made, the movies are loaded from the server. Here is the code for the design. It is done using AS2, and the stage includes two buttons (s1, s2) for playing the individual videos, one button to play them both (playall), one after the other, and the video object (video1_video) that was added via small menu you find at the top of the library panel's frame.
I cannot say this would work directly for your implementation, but it gives you some things you can look into so that you can figure out how.
function(){return A.apply(null,[this].concat($A(arguments)))}
// ignore whatever code is above this... the forum added it, not me
stop();
ncount = -1;
var connection_nc:NetConnection = new NetConnection();
connection_nc.connect(null);
var stream_ns:NetStream = new NetStream(connection_nc);
stream_ns.setBufferTime(3);
stream_ns.onStatus = function(infoObject:Object) {
        for (var prop in infoObject) {
               if(infoObject[prop] == "NetStream.Play.Stop" && ncount == 0){
                   video1_video.attachVideo(stream_ns);
                   stream_ns.play("20051210-w50s.flv");
                   ncount += 1;
playall.onRelease = function(){
      ncount = 0;
      video1_video.attachVideo(stream_ns);
      stream_ns.play("barsandtone.flv");
s1.onRelease = function(){
      video1_video.attachVideo(stream_ns);
      stream_ns.play("barsandtone.flv");
s2.onRelease = function(){
      ncount = -1;
      video1_video.attachVideo(stream_ns);
      stream_ns.play("20051210-w50s.flv");
I don't deal with video very often, so I have not created an AS3 version of this.

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

have you tried rebooting your computer?

Is there any possible way to see all Log-in information I have used one the web-page (not just passwords, but also a logins used)?

Hi all,
The problem is:
I have been using site at different times from different accounts, and I have used autologin thing.
But when last time I opened the site, for some reason Mozilla automaticly logged in with my very old account.
For some reason in Security -> Passwords - I see only 1 "Login" detail for this site.
Is there any possible way to see all Logins (login information) I have used on this site to log-in?
May be some file folder is recording them?
Thanks

If a password is filled then that can only be done if the password is saved in the password manager.<br />
If only the name is filled then that can be done by form fill.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/

In Pages 5.0.1. is there any way to link one pages document to another pages document. If so, How?

Is Pages 5.0.1 is there any way to link one Pages document to another Pages document? If so, Please, How?

Well, you could trade it in for a white one!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

When I'm trying to upload my homepage, (=the index.htmI) Iweb is telling me that it is not possible, because there is a unkown error. All the other pages from my website I upload very well,and they are visible. What can I do to repaire?

Hello people from the forum,
I have made a beatifull website, and upload it with filezilla to a server, and also I upload it to a local map.
Everthing was going very well, but i don't get my website on the internet, because one page will not be uploaded (again) and that is my first page, the home page (and for as far I understand also my index.html)
I web telling all the time: can not publish this page because there is an unknown error.
The strange thing is, that I can see, even on the local map as on the online server, that my home page is still there!
the size of the index.html is 303 kb (and when I open it, it is empty, but maybe thats normal?)
And yes, I did a lot of stupide things, by accident I deleted a lot of files and documents on my computer :-((
I reinstall Iweb (3.04) but the error is still there.
So, do I have to reinstall OS lion totaly? But them I i'm afraid that I lost all my webpages (even they are on the server now)
(can I put all on a USB stick, and make later again a new homepage?)
I hope one of you recognize this problem and have a more simpeler solution than my story here above.
Sorry for my english, I hope you understand.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Is there a way to restore the All Contacts app on my iPad 1. it seems the data and cannot turn a page or add more contacts

Is there a way to restore the All Contacts app on my gen 1 ipad? I seem to have lost the data and can't turn a page or add new contacts. I did try to reload the contacts (and I guess everything else) from my itunes computer backup but nothing happens to the All Contacts app. everything else seems to work fine on the ipad so I'm not sure what happened to the data or why. not sure i want to try and reset the whole ipad just for this one little app or feature...thanks in advance to any replies.

Sorry, had to sep out. I see the contacts "page" but I can't use the letters on the left margin or a finger touch to change location. Nor does anything happen when I touch the plus sign to allow me to add a new contact. So maybe he actual old contact data is still there I just can't get to it. Rick

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

Is there a one page summary of all routing decisions made by CUCM?

Similar Messages

Maybe you are looking for