Is there a partition scheme for both powerpc and intel-based macs?

I need to partition a drive to back up using time machine from two different Macs: one is powerpc and one is intel but disk utility seems to only allow you to choose on or the other.
this is the disk utility option:
Select a new partition scheme:
* Use Apple Partition Map partition scheme if the disk will be used with Time Machine and a PowerPC-based Mac.
* Use GUID partition scheme if the disk will be used with Time Machine and a Intel-based Mac.

silvrmn wrote:
unfortunately i am alternating them between computers.
is there a way to make it work or is the only solution to get two different drives and format them accordingly?
TM will most likely work fine with both computers if you partition the drive GUID. that's been the experience of most people who do it. but apple does recommend partitioning the TM drive GUID for backing up intel macs and APM for PPC ones.
using GUID is unlikely to create problems but it may.
but if you want safety on this you'll need two separate drives.

Similar Messages

Possible to use both PowerPC and Intel-based systems together with Qmaster?

Hello,
New to the Qmaster setup, I was wondering if it was possible to set up a Qmaster cluster mixing PowerPC and Intel-based systems. If it is possible, what version of Qmaster would support this type of cluster?

While it can work, note that if there is huge difference is processing speed, the PPC machine can actually slow down the process as everything waits for it to finish it's instance and copy it back.
It's worth a try but keep an eye on how the various computers perform.
Have fun.
x

PowerPC and Intel based USB Drive

Is it possible to have a startup disk for both PowerPC and intel based Macs on the same USB disk?

A PowerPC can't boot from USB drives. It can be done with a FireWire drive. Partition with the Apple Partition Scheme, install PPC Tiger on one partition. Cone Tiger from an Intel Mac onto the other partition. Either Mac can boot from a disk with the Apple Partition scheme, but the Intel Macs cannot install or update it.

Is it possible to install an app intended for PPC on an intel-based mac?

I have a "Websters" disk that works on Windows and PPC-based Macs.
I was wondering if I could install it on my Intel-based Mac? Is it possible?

Templeton Peck wrote:
Yes, provided the app is written for OS X, and not OS 9.
Good to know

Is there a Dedicated Volume for both ringer and mu...

I'm unalbe to find this option, but on ios, i was able to have seperate volumes for my ringer and music or media. I could have my music volume set high, while incoming allerts such as calls or messages set to a lower volume. Are these options available on the lumia 920?

Lumia 920
Seroius flaw....makes me wonder if software designers ever use these phones.
Why in the Hell can't I set the ringer colume, speaker phone volume, key touch volume, etc. separately?
-Wife goes thry the roof when I dial a call with the volume on 15.....they key touch tone should be able to be set independently.
-Key click when entering text....I want to hear it, but I don't want to bother everyone around me with hearing it.
I shouldn't have to reset the volume 4x to text, make a call, switch to speaker
Get your **bleep** together!

Erasing Time Machine hard drive after formatting for both PPC and Intel

Ok, I made a mistake. First I formatted a Western Digital 500 gig hard drive for both my wife's PPC G4 laptop and my own Intel MBP laptop, so we could both use Leopard's Time Machine for backing up to the same drive. That wasn't my mistake though, it's been working fine. I formatted my partition using the GUID option and hers using the Apple Partition Map option (I think that's what they are called, I'm going from memory).
Here's my mistake: I needed some extra space to store some files and read that I could Re-Partition the drive without erasing anything using Disk Utility. Sounded great. I first tried to partition my wife's partition, since she had more extra space, but then I realized that was a bad idea since I had formatted her partition with using the Apple Partition Map, so I stopped and then tried to Re-Partition my side. It worked for about an hour: my Time Machine backup drive appeared, my new partition appeared, but then... her partition disappeared! Usually whenever one of us plugs in the hard drive using the firewire cable, both partitions appear, Time Machine Goes to work, and that's that. When we need to disconnect from the drive we have to eject both drives, but no big deal. Now her drive isn't appearing.
So... I tried to repair it, no good. Tried to erase both her partition and mine (to just start over): no good. I can't do anything to either of these partitions now, from either computer. Tried everything I could think of in Disk Utility, from both computers. Won't erase, won't re-partition. Not a hardware issue: it all started when I did this stupid Re-Partition. Help!!!!
I want to erase the drive and start over. Can anyone advise??

Jasonmo,
First, let's talk about the various partition schemes. A partition scheme applies to the entire drive. Specifically, these are different maps written to the drive, within which volumes are created. As such, this is an either/or thing; your drive is partitioned using either the GUID Scheme, or the Apple Scheme, not both.
"Live" partitioning or re-sizing of existing volumes is supported only under the GUID Partition Scheme. If the drive wasn't using this scheme, you would not be able to re-size as you were attempting to do. Even re-sizing under the GUID scheme requires that the drive's maps and directory structures be in very good shape, if it is to work without hitch.
Are you absolutely certain that there isn't some physical problem with the drive, or with its interface (cables and such)? If it is operating normally, you should be able to re-partition it without problems. In DIsk Utility, select the drive (not a named volume that will appear indented underneath), then click the "Partition" tab. If you wish to be able to re-size volumes later, you must choose the GUID scheme from the "Options..." dialogue sheet. Set appropriate sizes for the volumes, then click "Apply." Doing so will destroy all current volumes and data on the drive.
Scott

Internet Sharing for PPC and Intel based Macs

I have OSX 10.4 Server running with NAT and DHCP enabled. The internet is accessed through a wired connection, and 2 Powerbooks(PPC based) and an Intel iMac and MacBook connected to the server via Airport. The wireless signal is WEP protected, and the Intel based Macs can connect to the wireless network, recieve a good IP address and access the internet. These two connected computers can be seen on the Server Admin DHCP Clients tab.
My problem is with the PPC based Mac, the 2 PowerBooks. Those computers can connect to the wirless network, but they get an invalid IP address. Not only is the IP invalid, so is the Subnet Mask.
All computers are running 10.4.7, and all installed from the Combo Updater.
Any suggestions?

We're having the same problem here!
Rarely we manage to get the right IP address assigned to one PPC machine by playing with various network settings but we didn't found a reliable way to get the PPC machines always working.
This is really strange... any suggestion is appreciated.

Apple Releases Security Update 2006-004 (PowerPC and Intel)

From Macfixit................
Apple has released Security Update 2006-004 for Mac OS X in both PowerPC and Intel versions. This update requires Mac OS X 10.4.7 for either PowerPC or Intel, Mac OS X 10.3.9 or Mac OS X 10.3.9 Server.
This is the fourth major standalone security update for Mac OS X released this year.
Update procedure recommendation First, avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. In addition, before installing this security update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying the update (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted.
Enhancements in this release
Of most interest to general end-users:
a fix that prevents maliciously crafted Zip archives from causing condition where arbitrary code can be execute. In other words, prior to Security Update 2006-004 you could download a specially crafted file ending in .zip from a Web site or other location, and it could trigger the execution of malicious code.
a fix that disallows maliciously crafted Canon RAW images from creating a buffer overflow, potentially leading to arbitrary code execution. Prior to Security Update 2006-004, you could download or otherwise receive a Canon RAW file that could allow execution of malicious code on your system.
similar to the above, a fix that prevents maliciously crafted GIF images from causing an integer overflow, potentially leading to arbitrary code execution.
new download validation that will catch certain HTML files defined by Safari as "safe" that may actually contain malicious JavaScript code. After applying Security Update 2006-004, these files will not be automatically opened.
Protection against maliciously crafted HTML documents that can also open the door for arbitrary code execution by accessing deallocated objects.
A full list of enhancements is as follows:
AFP Server
An issue in the AFP server allows search results to include files and folders for which the user performing the search has no access. This may lead to information disclosure if the names themselves are sensitive information. If the permissions of the items allow it, the contents may also be accessible. This update addresses the issue in Mac OS X v10.3.9 by ensuring that search results only include items for which the user is authorized. For Mac OS X v10.4 systems, the issue was addressed in Mac OS X v10.4.7. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9:
The AFP server contains an integer overflow that can be triggered by an authenticated user. A malicious user with access to the AFP server may be able to cause a denial of service attack or arbitrary code execution with system privileges. The AFP server is not enabled by default on Mac OS X. This update addresses the issue by performing additional validation. Credit to Dino Dai Zovi of Matasano Security for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
On Mac OS X Server, the AFP server supports reconnection of file sharing sessions after a network outage. The storage of reconnect keys is world-readable. It may be possible for an authenticated local user to read the reconnect keys, use them to impersonate another user over AFP, and access files or folders with the privileges of the impersonated user. This update addresses the issue by protecting the reconnect keys with appropriate file system permissions. This issue only affects Mac OS X Server. Available for: Mac OS X Server v10.3.9, Mac OS X Server v10.4.7.
An unchecked error condition exists in the AFP server that may lead to a crash. By carefully crafting an invalid AFP request, an attacker may be able to trigger this condition and cause a denial of service. This update addresses the issue by handling the formerly unchecked error condition. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bluetooth
The security of the Bluetooth Setup Assistant has been improved in this update for Mac OS X v10.4.7. The length of the automatically generated passkey used for pairing has been increased from six characters to eight characters. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bom
An issue in Bom's compression state handling may cause heap corruption. By carefully crafting a corrupt Zip archive and persuading a victim to open it, an attacker may be able to trigger this condition which could lead to an application crash or arbitrary code execution. Note that Safari will automatically open archives when "Open `safe' files after downloading" is enabled. This update addresses the issue by properly handling such malformed Zip archives. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
DHCP
A stack buffer overflow exists in bootpd's request processing. By carefully crafting a malicious BOOTP request, a remote attacker may be able to trigger the overflow and cause arbitrary code execution with the privileges of the system. Note that bootpd is not enabled by default in Mac OS X, and must be manually configured in order to be enabled. This update addresses the issue by performing additional bounds checking. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
dyld
Malicious local system users may specify dynamic linker options that cause output to standard error. This output contains informational content and potentially user-specified content. As a result, privileged applications that parse or reuse standard error may be influenced inappropriately. This update addresses the issue by ignoring the problematic dynamic linker options in privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
An improperly handled condition in the dynamic linker may lead to including dangerous paths when searching for libraries to load into privileged applications. As a result, malicious local users may cause the dynamic linker to load and execute arbitrary code with elevated privileges. This update addresses the issue by properly selecting search paths when executing privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
fetchmail
Several issues in the fetchmail utility were discovered. The most serious issue could lead to arbitrary code execution when fetching mail from a malicious POP3 mail server. All issues are described at the fetchmail website (fetchmail.berlios.de). This update addresses the issues by updating fetchmail to version 6.3.4. In addition, fetchmail is no longer distributed as a privileged utility. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
gunzip
A race condition may allow a malicious local user to modify the permissions of files owned by another user executing gunzip. This issue is only exploitable when executing gunzip on files in directories that are modifiable by other users. This update addresses the issue by properly handling files while decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
A directory traversal vulnerability is present in the command line utility gunzip when it is used with the non-default "-N" option. By carefully crafting a malicious compressed file and persuading a user to open it with "gunzip -N", an attacker may replace or create arbitrary files with the privileges of the victim. This update addresses the issue by properly stripping paths from files when decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Image RAW
By carefully crafting a corrupt Canon RAW image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Canon RAW images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
ImageIO
By carefully crafting a corrupt Radiance image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Radiance images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
By carefully crafting a corrupt GIF image, an attacker can trigger an undetected memory allocation failure which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
By carefully crafting a corrupt GIF image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
LaunchServices
Download Validation may erroneously identify certain files containing HTML as "safe". If such a file is downloaded in Safari and Safari's "Open `safe' files after downloading" option is enabled, the HTML document will automatically be opened from a local URI. This would allow any JavaScript code embedded in the document to bypass access restrictions normally imposed on remote content. This update provides additional checks to identify potentially malicious file types so that they are not automatically opened. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
OpenSSH
Attempting to log in to an OpenSSH server ("Remote Login") using a nonexistent account causes the authentication process to hang. An attacker can exploit this behavior to detect the existence of a particular account. A large number of such attempts may lead to a denial of service. This update addresses the issue by properly handling attempted logins by nonexistent users. This issue does not affect systems prior to Mac OS X v10.4. Credit to Rob Middleton of the Centenary Institute (Sydney, Australia) for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
telnet
When connected to a TELNET server, the client may send the contents of arbitrary environment variables to the server if the server requests them. Some environment variables may contain sensitive information that should not be sent over the network. This update addresses the issue by ensuring that only non-sensitive variables and variables that the user has explicitly requested are are shared with the server. Credit to Gael Delalleau and iDEFENSE for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
WebKit
A maliciously-crafted HTML document could cause a previously deallocated object to be accessed. This may lead to an application crash or arbitrary code execution. This update addresses the issue by properly handling such documents. Credit to Jesse Ruderman of Mozilla Corporation for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
AppKit, ImageIO
Buffer overflows were discovered in TIFF tag handling (CVE-2006-3459, CVE-2006-3465), the TIFF PixarLog decoder (CVE-2006-3461), and the TIFF NeXT RLE decoder (CVE-2006-3462). By carefully crafting a corrupt TIFF image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of TIFF images. Systems prior to Mac OS X v10.4 are affected only by the TIFF NeXT RLE decoder issue (CVE-2006-3462). Credit to Tavis Ormandy, Google Security Team for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7./

Right after installing Security Update 2006-004 (Intel) on my macbook pro I am having troubles with my wireless connectivity. Here is the dump from the console:
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
I can reboot and it will work, but if I put my macbook to sleep it, when I wake it, it will do the same thing again.
I am also getting timeouts waiting for results of 1st wireless scan to complete in console.
Anyone else having this issue?
MBP15-2GHZ Mac OS X (10.4.7)

Are there different licensing schemes for WebLogic Server?

Is there different licensing schemes for WebLogic server?
For example,
Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and BIP?
Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and Oracle Reports?
Edited by: 957072 on Jan 28, 2013 5:43 AM

Please go through below metalink id for weblogic licensing.
Master Note on WebLogic Server (WLS) Licensing and License Files [ID 1076283.1]
Thanks,
Kishore

Recommended Partition Scheme for 11i / RH ES 3

Hi,
What's the recommended partitioning scheme for a RH ES3 and 11i install?
Regards,
Carlos

Hi, The basic scheme that I use is the following:
/ ....................... 2 GB
/tmp ................. 2 GB
/home ............... 500 MB
/var ................... 1 GB
/usr .................. 4 GB
swap ................ equal to ram size
prodappl............ 50 GB ---> Apps Tier for EBS 11i (COMMON_TOP, IAS_ORACLE_HOME, ORACLE_HOME_806, APPL_TOP)
proddb ............. 10 GB ---> Oracle Home RBDMS for EBS 11i (ORACLE_HOME)
proddata01 ....... 40 GB ---> filesystem datafiles 1
proddata02 ........40 GB ---> filesystem datafiles 2

Partition scheme for new 64b dual boot Arch/Win7

Hi,
I'm about to install those 2 OSs on a new PC.
I plan to use PMagic to partition the disk, then install Win 7 (ult 64b) and finally-Arch 64b.
I've read that Win7 actually uses TWO partitions a (relative small) boot partition and a "main" partition.
My questions:
1. While using PMagic to prepare my HD, should I prepare ONE or TWO NTFS partitions for Win 7?
2. If 2, what size should the Win 7 boot partition be (I've thought about 50 MB)?
3. If 2, How can I "tell" Win 7 during install to use those two existing partitions rather than creating a new win-boot partition?
4. Will GRUB recognize both OSs in case of 2 Win partitions?
Thanks
Last edited by mibadt (2010-09-12 07:49:10)

if you don't want to run in any errors, just set up win7 first . it creates a 100mb (boot?) partition, one for the system and around 1MB free space (don't ask me why).
grub itself doesn't recognizes the windows installation but its easy to edit the file. i think you just have to change the partition that it directs to window's boot partition (/dev/sda1 in my case)
mine is looking like this:
## (2) Windows
menuentry "Windows" { set root=(hd0,1)
chainloader +1

What partition scheme for a single partition ext. hdd use for mac(hfs+j)?

Hey Forum,
I am using a wd 500gb ext hdd and now i am about to reformat my hdd to one partition hfs+j and now i need to know, reformat it to apple partition map, master boot record, or guid partition?
Pls reply thanks!:D
Ala.

Hi Ala,
GPT (GUID Partition Table) and MacOS Extended (Journaled) are the standard (normal) settings to be used for external harddisks in conjunction with Intel-based Macs like your MacBook.
Regards
Stefan

Updated 2.3.3 for both x10i and x10a (ALL KITS)

Updated 2.3.3 for both x10i and x10a (ALL KITS)
http://www.topsony.com/forum/local_links.php?catid=4556
download FlashTool
http://forum.xda-developers.com/showthread.php?t=920746
or
http://androxyde.github.com/Flashtool/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Solved!
Go to Solution.

this is how to add more Internal Memory it's a long process but its worth it
1) backup everything (Check above)
2) backup your SD card
on your PC
1) open any folder -> click on tools -> properties -> view -> show hidden files
2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
now this is where it gets AWEOME-ER
Guide to using Link2SD on your Xperia smartphone
This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
– Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
– Download and install MiniTool Partition Wizard onto your PC or laptop.
On your Xperia:
– Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
– Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
– Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
2. ROOT
3. BACKUP MEMORY CARD
As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
4. CREATE SECONDARY PARTITION
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
If you see this pop-up below, just press ‘Yes’ to continue.
d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
5. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
You will then see the Superuser Request, click ‘Allow’.
Once you see the following message, restart your phone. The app should now be ready to use.
b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
Special Thanx to the Xperiablog
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

Is there a partition scheme for both powerpc and intel-based macs?

Similar Messages

Maybe you are looking for