Is there a "paste insert" function in Logic?

Hi all - I'm a Logic user with a Final Cut Pro background. I am looking for something similar to what in the video world is called a "Paste Insert". I would like to be able to seect a bunch of regions in logic and (for example) paste them to the start of a song in such a way as to push everything else up.
I hope that makes sense.
I am also wondering what effect this has on any automation.
Thanks

Hi
Check out the Edit:Cut/Insert Time functions. I think that the "Splice" option will do what you want. Generally, the automation is copied/moved as needed.
CCT

Similar Messages

Is there a note repeat function on Logic Pro?

Just switched to Logic Pro but I am used to sequencing with a MPC i.e. note repeat Is there a note repeat function in Logic? It can be helpful when sequencing drums! If not, is there some other software that allow to to use note repeat on the logic instruments? Thanks

Hi,
press CMD-8 to open the environment window. Select "new - arpeggiator"
Now think how you want to trigger the arpeggiator. Do you want to trigger it with a MIDI Region? Or do you want to trigger it with live MIDI input (from a keyboard or so)?
Maybe you also have to select "new - physical input"
You can pull cables inside the environment window. pull a cable from the source trck or source input to the arpeggiator. Then pull another one from the arpeggiator to the drum track you want to trigger.
Now select the arpeggiator and set up the speed (1/8, 1/16 - what you want). Look in the manual for "arpeggiator".
Now the master-hint: The arpeggiator only functions when logic is running. So when stop or pause is pressed, no arpeggio So, start your song, only press 1 key and voila: there are the manymany drumdrumdrum bangbangs.
Have Fun, and good luck with the setup - i tried some time to get this right.
Fox

Message determination and Partner function LS (Logical system) for PO

Hi,
I have worked in the past with vendors (VN) as partner roles in a PO, with the message to create an EDI outpout to Partner Type: LI (Vendor), and this works succesfully.
Now, the idea was to use in EDI, a Partner Type: LS (Logical system) as a receiver of EDI messages (message types: ORDERS) for inbound Purchase Orders to the Partner.
So, we have set up a respective message condition, with Partner Function: LS (Logical System), in transaction: MN04 (Create Output-condition records).
A. When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent to partner.
B. When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N?
There is a single message condition that is to be read for both cases (trans: ME59N and ME21N).
Note: If I try ME21N, and enter the output type and partner (=Logical System), manually, I receive a warning message :
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent.
However you can not assign a partner function LS to a vendor, in vendor master data, because of message CZ 327 (Can not use this partner role).
Anyone with similar experience? Thank you for your advice.

Hi,
I well understand that the receiving partner can be a partner: Vendor (LI).
I have seen that working.
However, in the Partner Profiles (trans: WE20), the receiver was created as a Logical System (LS).
We want the partner Logical system (LS) to receive the idoc for purchase order (ORDERS).
After that, I think that the idea is that the LS can generate an idoc for a sales order creation that will then outbound to another partner. I think that this is the concept.
The issue is that I have seen that the POs created with transaction: ME59N, have received from message determination (trans: MN04) the message with partner LS (automatically), and the idoc of the purchase order (ORDERS) have reached the partner LS.
The question is why the message determination fails when creating the PO from trans: ME21N or ME21, with reference to the PR. Message condition is the same and message determination procedure is the same for both cases.
There is no issue with customizing for the LS in trans: WE20
(Port processing agent is Active for LS and ORDERS have the proper processing code for application EF).
I hope I am helping more with this.

Is there a Ripple-"cut" function in FCE?

Hi-
This is something I have been battling for a while. I am pretty sure no such thing exists, but here goes:
In the past, when I have simply wanted to move one clip to another place in the timeline, I have had to
+1. copy it+
+2. Ripple delete it+
+3. Paste insert it where I wanted it to go.+
So here are the questions:
*1. Is there a "Ripple-cut" function in FCE that ripple-deletes the clip while copying it to be pasted later?*
*2. If not, is there a better workflow for the process than the one described above?*

Thanks Tom,
Sorry for doling out answer points so quickly, I merely assumed that since it wasn't in one of the top menus it didn't exist. I then found out that ripple-delete wasn't in the top menus either, but of course it exists!
Just tried the ripple-cut, and of course it worked. Thanks again Tom, sorry for being so hasty to declare my question solved!
Is there a good site you know of where I could see more of these shortcuts that aren't mentioned in the menus?
P.S. If you ever do another reprint of your book, this might be something to consider adding, since it seems like such a basic requirement! (moving things within the timeline effectively is an important skill to have)

Module pool / Screen Prog is there any standard SAP functionality ?

Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?

No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman

Menu Insert Function is often Greyed out

Hi
New user of numbers and Forum. Have searched this to no avail sorry if inappropriate post.
Insert>Function submenu is greyed out under all circumstances other than when a blank cell is selected (not even an "=" allowed). This makes it very tedious to construct longer formulars with >1 function in them (ie. most formulars!). Is there something I am missing? This is User friendly software gone too far, not friendly.
In particular I want to use Insert>Functions>More Functions... inside a formular as I am still migrating from Excel and iWorks memories.
Cheers

With iWork you got three PDF Users Guides which are also for you.
On page 26 of the English one dedicated to Numbers you would find useful explanations.
You are right, the Insert functions menu item is often greyed but the efficient way to insert a function is not this one.
It's a button in the toolbar:
+-+-+-+-+-+-+-+-+
Worried Life Blues 2008
+4. Discussions+
+Apple Discussions, launched in August, 2000, have grown rapidly in usage and features. The main features include personalization, subscription capabilities and email capabilities. _For information on how to use Discussions, please visit the Discussions Help Page_. Cookies should be enabled and an Apple ID account is required if you would like to contribute to the discussions.+
+Entering the Help and Terms of Use area you will read:+
+*What is Apple Discussions and how can it help me?*+
+
Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.+
+_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages._+
+*I have a question or issue*—+
+how do I search for answers? _
It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+Search tips are available here:+
+http://discussions.apple.com/help/search-tips.html+
+-+-+-+-+-+-+-+-+
Yvan KOENIG (from FRANCE lundi 4 août 2008 08:57:44)

'Solo latch' function in Logic 9?

In Pro Tools there's a useful function which allows you to turn 'solo latch' on and off. Is there anything like that in Logic 9? I realise you can drag down the arrange window and turn 'solo' on and off for multiple tracks, but that's not quite the same, as the tracks you want to switch to 'solo' may be at opposite ends of the mixer or arrangement window.

Yes, sorry, I didn't make myself clear. I've just found what I was looking for: selecting 'solo' on several tracks in succession - and in conjunction with the 'alt' key - seems to be Logic's equivalent of having 'solo latch' turned off in Pro Tools.

Does Apple allow functionality between Logic Pro and Airport Express

That's it... Does Apple allow functionality between Logic Pro and Airport Express.
If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

There is your solution: http://www.rogueamoeba.com/airfoil/

Paste Insert Into Waveform

It doen't look like I can copy a waveform, then paste-insert that copied waveform into another waveform. Please tell me I'm wrong!

Works fine when I do it... there are several clipboards you can use, so you can even do quite complex operations like this.

Paste Special function

My question :
1. in column A I hv a value, let' say "10"
2. in column B I hv a value, "price", let's say "10"
3. in column C I hv the result of A*B = "100"
4. in column D I hv the result of C*0,90 = "111,111"
Now I want to copy and paste (or cut and paste) column D in column E
Then I want to delete column C and B and A and keeping the values of column E but as numbers has no "paste special" function my results in column D become "0"
How to solve this problem in a way I was used in "excel" ? Or is there no solution and hv I to calculate this by hand and calculator and fill the result in a new "sheet" ?

Don't worry.
I didn't miss this one but I missed some others
And it's the same with functions.
You are lucky you english users.
For you ROW() is always ROW().
For a french user, it was RANGÉE() in AppleWorks but it is now LIGNE() in Numbers so we are always searching for the "missing" item
And sometimes the localisation is so odd that I must look at the English interface to understand what the help is describing.
Yvan KOENIG (from FRANCE samedi 15 décembre 2007 21:31:38)

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
It's not the best solution but it helps (of course, if you have a Mac!)

Is there a Paste in Place option for iBooks Author?

Is there a paste in place option for iBooks Author like there is in Adobe InDesign? Thanks.

InDesign's PIP means pasting at arbitrary coordinates.
Not sure what that has to do with iBA, sorry, which isn't strictly canvas based.
If you just want to clone items....that depends on the object. Best to experiment with your particular content, etc.
Ken

Is there a "paste insert" function in Logic?

Similar Messages

Maybe you are looking for