Is there a pc version available for ibooks.

is there a pc version available for ibooks.
where does the .itmsp files reside in itunes and how do i donwload it.
I am a novice on the apple peoducts.
Need help. Thanks.
regards
PP

No, there is due to be an iBooks reader for OS X Mavericks, but as yet no indication of if or when that will be extended to earlier versions of OS X, let alone to Windows PCs.
From the look of this, .itmsp is the format publishers use to upload content to the iTunes Store, but not what the user downloads. iBooks files have the extension .epub. Non-protected iBooks can be read in any suitable reader, protected books need an iBooks app.
tt2

Similar Messages

HT4623 Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

- The 2G iPod can only go as high as iOS 4.2.1. It does not have the hardware to support a higher iOS version.
- Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
- You can only download the current version from the App store.

My iPod touch is a model MB528LL running version 4.2.1. I would like to download the At Bat 12 App (the $14.99 version) so I can listen to professional baseball games this year. Will there be an app. available for my iPod?

My iPod touch is a model MB528LL and runs version 4.2.1. I would like to download the At Bat 12 app. (the $14.99 version) so I can listen to professional baseball games this year. Will there be an app. available for my iPod this year?

I went to the link you posted and followed all the steps. I was thrilled to see that it worked! I don't recall whether my PC still recognized my iPod Touch as a camera or not, but DEVICES did show up in iTunes and it recognized the name of my iPod Touch.
Now, though, everything is back the way it was. The PC tells me I have a camera connected via USB and iTunes doesn't even have DEVICES listed in the left-hand column.
I'm wondering if this is the problem: I had the iPod on until the battery was so "low" that it stopped. I didn't press and hold the button on top. In fact, until I read the article you linked to, I didn't even know you could turn the iPod on and off that way. I would only press it once until the screen turned blank and simply pressed the Home buttom to turn it back on. Until I read that article, I thought the Home button was the On button.
So now my question is this: Should I ALWAYS turn the iPod off by pressing and holding the button on top until I see the red slider on the screen?
Thanks!

Is there a downloadable iTunes Version Available for OS Windows ME?

Is there a downloadable iTunes Version Available for OS Windows ME? If so, please let me know. Here is the situation.
I would like to import some classical music that I have in my Windows Media Player to iTunes so that I could burn the music to a CD.I am unable to burn the music in the WMP program because the Adaptec Easy Cd Creator is not compatible with the newer version of the WMP. Also, the Roxio program is not available for the older version of Windows ME. Any help would be appreciated in this matter.
Thank you.

If there is, folks running OS 8 and previous who hang out here might not know about it. But folks in the iTunes for Windows forum probably used to run it, and can help out a lot:
Discussions > iTunes for Windows

Why is there no option for the voice over feature to be available for iBooks only?

Why is there no option for the voice over feature to be available for iBooks only?

Hello,
We are aware if the 'black box' issue with the shim installer (downloaded from get.adobe.com/flashplayer), however, this should not be the case with the full installer. The links for the full installers are posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

There is no iView available for system "SAP_ERP_HumanResources": object "em

Hi Experts,
I have a search process iView . When I press on any process and press the detail button .. I get a popup screen which shows detail of the process.
On the detail screen - there is collumn called Form Steps which shows all the steps in the Process . When I click on the one of the steps I get another another browser window with the following error
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
I have checked in the Business Objects and in the employee object I am not sure which iView gets called when u click on the steps link
Need your help in this regards.
Regards,
Akshay ..

Hi Akshay,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
      - Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
      -> in the "Portal Anywhere" Admin Tools section, navigate to
          'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph
Edited by: jo chinna on Dec 14, 2009 12:39 AM

There is no iview available for system SAP_ERP_HumanResources obj employee

Hi Experts,
I'm working on EHP4 and facing an error in ESS -> Career and Job -> Appraisal Documents -> My Appraisal Documents tab and in MSS -> Talent Management -> Performance Management -> Tasks Tab.
Whenever I click on the document icon in My Appraisal Documents tab I get the Error message " There is no iview available for system SAP_ERP_HumanResources. object "employee". For more information, contact your administrator."
In MSS the same thing happens in Task tab but the document in Employee Documents tab opens up fine.
It will be greatly appreciated if anyone can suggest how I can resolve this issue.
Regards,
Seema Rane.

Hi,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
- Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
-> in the "Portal Anywhere" Admin Tools section, navigate to
'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph

There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator.

Dear All
I am getting an error in my SRM system.
Er "There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator."
I followed the below thread.
There is no iView available for system "SAP_SRM... | SCN
I have assigned the Iview to this role.
The same changes i have done in Development system
where it is working fine.
But in my QA system i am getting this error.
My Portal version is 7.3.
Please help with your valuable suggestion
Regards,
Prashant krishen.

Dear All
thanks for your reply.
I am able to resolve the issue.
In my case there was some parameter missing in transported object.
I followed some steps.
1) I compare the Iview property of transported object with Specialist object.
2) I found that OBN parameter was missing.
3) I include it as per above document.
4)But after that in the rfx response, iview was opening in some tab but when i was trying to open with Overview item i was getting error.
5) Than i search in portal content with *qte*
6) I found more iview in Quotation folder i added those iview in strategic purchaser in navigation folder.
This is how i am able to resolve.
Thanks everybody for you prompt answer and support

There is no editor available for filename ... VB 2010

There is no editor available for '<filename>'.
Make sure the application for the file type (.vb) is installed.
I got this message after I updated a VB08 project to VB10. I tried to open a form when this message was shown. It happens to every form in the group (but not standard classes). Can anyone help?

Hi guys
Please do not stop adding updated comments to old posts as these problems crop up time after time.
I experienced the same error 'There is no editor available for <filename>... ' but I knew it wasn't my VS Installation as I grabbed an older version of the code from the svn and that compiled and ran.
My errors were strange though, the solution has 39 projects and several projects were being skipped during a rebuild and there were the yellow ! in the main projects but when I tried to remove and add those references I got errors and they would not re-reference.
I tried all sorts of solutions and then I found this post.
Through reading through all of the posts I came to the conclusion there was a compatibility problem and when I started looking at the problem projects they were all at .Net V2.0 (that application has been around since 1.0). I
upped the framework version on one project and did a test rebuild, and it built so after upping all of the projects to V4.0 I can open the forms, the solution builds and the code runs and this post save me a huge huge problem and also what was potentially
going to be potentially an enormous amount of time to recover from another developers cock-up.
So please comment on old posts, it helped me massively.
Jayzee

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

You mean Microsoft Remote Desktop Connection Client for Mac

Is there a dictation app available for the iPad 1?

Is there a dictation app available for the iPad 1?

On the iPad, go to Settings > General > About and you'll see the version.
The App Store is an app on the iPad.

Is there any project manager available for Mac. Something similar to MS Project

Hi guys
Is there any project manager available for Mac. Something similar to MS Project?
If there was not one "genuine" version, may there be an app or so which enables to visualize a project desgined on MS Project?
Any advice?
Thanks so much for any help oyu may provide me.
Kind Regards

Check this list:
http://mac-project-management-software-review.toptenreviews.com

There is no iView available for system "SAP_ERP_Manufacturing"...

Hi out there,
I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
Best Regards
Juergen Kuechle.

Hi Thulasi,
sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
Regards, Juergen.

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Portal error in SRM 7.0 -"There is no iView available for system "SAP_SRM"

Hi All,
We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
"There is no iView available for system "SAP_SRM": object "cont". For more information, contact your administrator."
We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
Any pointers?
Thanks
Arun

Hi Arun,
Pls check the portal content and portal roles with iviews maintained properly or not.
Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
This might help you.
http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
Regards
Kiran

Is there a pc version available for ibooks.

Similar Messages

Maybe you are looking for