Is there a Polarizing Filter Available as a Plug-In?

Is there a polarizing filter available as a plug-in?
I have some footage that in hindsight I wish I had shot with a polarizing filter on the lens.
John

Sounds like poor pre-production planning on the part of the photographers/camera techs.
No, there is no polarizing filter. What there are are some creative techniques to fix this using matte gradients, composite modes and other color correction techniques.
Perhaps this will have some good hints http://www.amazon.com/Apple-Pro-Training-Encyclopedia-Correction/dp/0321432312/r ef=pdbbs_sr1?ie=UTF8&s=books&qid=1211420892&sr=8-1

Similar Messages

Is there a filter available for content (such as ***********,violence, etc) that can be used in Safari?

I'm considering getting an iPhone. However, I'm worried about Safari. What if I stumble upon a bad website, filled with that kind of content? So there must be some sort of filter, available to install for the content streaming into Safari...

Thank you for the response.
I'm sorry to hear there is no list available. I'm building the Acrobat bookmarks automatically. The input data contains entity codings (for example, a lower case Greek gamma is coded as γ) and I was hoping to be able to just pass these through with an automatic conversion to a hexadecimal string (for example <FEFF03B3>). If I had a list of valid Unicode characters, that will display in an Acrobat bookmark, I could validate each entity before the conversion and catch the ones that won't display correctly. I know these types of characters are out there because I have already come across them. For example, a superscript 5 (0x2075) displays fine in MSWord but shows as a white box in a bookmark. Now I'll need to proof the output PDFs and look for white boxes in the bookmarks so that I can build my list of unicode characters that do not work in Acrobat bookmarks.
Again, thanks for your help.

My circular polarizing filter doesn't seem to have a very wide change spectrum?

Do circular polarizing filters come in various strenghts or ranges of change? ARe all C-polarizing filters the same? Yes, I know how to use them. I know the 90degree angle to the sun and all that ...I feel that I should be able to rotate the filter and see through the lens excactly what the change will be...frankly I find it very difficult to see the amount of change in the blue of the sky using the filter that I have....shouldn't you be able to rotate the filter and observe the change gradations? Shouldn't they be obvious as in a ND filter? Should I ask for a "stronger" polarizing filter?

iris wrote:
Remarkable results with your HDR....I am interested in HDR but have no real understanding of it. I get the impression you dont need a lot of lenses? ? what? I saw friends on a recent trip to the mountains raving about the little bit of weight they took with their cameras...I'm not sure I understand HDR at all right now?You need a tripod, not a lens. Well, obviously a lens, but a tripod is the standout requirement for HDR. Basically all you're doing is taking photos as multiple exposures (very dark, dark, normal, light, very light) and combining them into one image with a large (or "High") dynamic range (the 'distance' between the darkest and lightest points in an image); hence the name HDR. You can shoot it without a tripod, most software can try to align the frames, but it's much better to just use a tripod if available. As mentioned above, Photomatix is the name brand in HDR, but that's changing and the technique evolves. It's far superior to control in Photoshop, however. There's a plug in for Lightroom called Enfuse (free) that is very powerful, but not as user friendly. And the soon to be released Lightroom 6 will have HDR built in; we're all eager to see what that looks like. The examples that eBiggs posts really show tone mapping more than HDR. All HDR (and non-HDR) images have to be tone mapped to display on a LED screen, but if you search for "tone mapped" you'll see that there is a look associated with the term. On the flip side, HDR images can be tone mapped to look normal, mearly trying to squeeze a large dynamic range into one picture. A very common use is in Real Estate/Architectural photography when dealing with lots of windows. The difference in light levels between the inside lights and outside can often be far too large for a camera (even though your eyes can adjust ok). So you're left with either completely white windows, or dark interior. The goal isn't to make something that looks 'tone mapped', but to have it look normal. Like this: Even with lighting I couldn't completely balance out the sun, so I simply stack a few images to fill in the low spots. It doesn't look like anything special, but it's not supposed to. You can see the outside has a slight bluish tint to it. Poor tone mapping on my part. Another example, where the left and back walls were windows, creating a bright gradient out of the lower left, leaving the back completely dark. Again, you're not suppose to look at it and think HDR, it's suppose to look like an ordinary photo. Just some examples of another side of HDR...

Is there a spam filter for email?

Getting dozens of spam emails on iPad and iPhone each day. Is there a filter available?

Hi everyone
It's been awhile since I last visited. Good to be back. I have a problem with spam on my @me.com account, is there any way to convert this into an @icloud.com account so I can relieve myself of this problem. As we speak I am staring at 996 emails with the vast majority of them being spam(I really hate my brother!). I would hate to lose all my purchased content because of this problem. If Apple would allow me to change my primary Apple ID email account I could resolve it that way as well. On the AppleID site you only get options to add alternate email addresses.
Any suggestions greatly appreciated
Thanks

Is camera raw filter available with LR 3 or CS5?

Is camera raw filter available with LR 3 or CS5?

There has been a Camera Raw plug-in for Photoshop for many versions by now.
There is a new Camera Raw filter in PS CC—something that allows you to use the camera raw plug-in as a smart filter for a layer.
The Develop panel in Lightroom has the same adjustments as the Camera Raw plug-in for PS.
So depending on what you mean by “Camera Raw Filter” the answer is either LR3-No, CS5-No for the filter in PS-CC, or LR3-Yes, CS5-Yes if you mean the CR functionality.

Spam filter available?

I gave up my iphone and switched to a blackberry as I get
so many spam emails and there was not spam filter available.
Has that changed yet or are they working on it?

There are no spam filters for the iPhone. All of that filtering has to be done server side.
What email are you using? I get very little spam on my phone due to good filtering on my work server and Gmail.

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

IPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one but not all apps. I have more storage than the app takes. Can u help?

iPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one of the apps, but not other apps. I have more space available than needed for the app. What do I need to do to fix this problem? Do I need to completely reset this device as new and, if so, how should I do that?

You need to delete some item (apps, music, photos etc) from the iPod,.However, sometime files get corrupt. To determine that connect the iPod to your computer and click on the iPod under Devices in iTunes. How much storage is used by the "other" category. If over 1 1/2 GB that indicates corrupted files.
To get the "other" down to normal value you need to restore your iPod usually restoring from backup works but sometimes restoring to factory settings.new iPod is required./

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 6 apps this is really bothering me please help I can't even take pictures because it says I've no storage

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have no messages at all

My iPhone is a 16GB and it says 9.0GB Available and 3.7GB used; I suspect the missing 2.3GB is occupied by the system software.

Why does "Check for Updates..." show that there are no updates available while I'm using Firefox 3.6.18 and latest version is 5.0.1?

First and foremost, I'd like to clarify that I hardly have any technical knowledge. So pardon me if this comes across as a silly question to the professionals. Here are the details pertaining to this problem as per the best of my limited knowledge:
I'm currently using Mozilla Firefox 3.6.18; previously it was 3.6.13. It was updated to 3.6.13 from 3.6.9 after I clicked on Check for Updates... and it told me that it'd be done when I reboot my system. When I restarted my PC, I was surprised to find that it was downloading the version 3.6.18. I didn't know how much it'd progressed in the process, so I let it finish it. After that, I disabled the option that enables it to download and update on its own, and turned it off. Next time when I started it, it was 3.6.18, but wasn't updating on its own anymore.
Now I wanna update it directly to the latest version 5.0.1. But when I leave it to "'''Automatically download and install the update'''" option under Tools>Options>Advanced>Update, it downloads and updates the versions as per their release order. So if I leave it to it, then when I start it next time, it'll start downloading the version next to 3.6.18 and update to it instead of updating directly to 5.0.1. It'll keep doing so until it reaches there. For reasons of my own, I don't like that. So I '''unchecked '''the "Automatically download and install the update" option and chose the "'''Ask me what I want to do'''" option (so that it doesn't keep repeating the "downloading and updating" process on its own every time I start my PC). Then I went to Firefox site and thought of downloading and updating to the latest version on my own. But then I was informed that if I do so, '''I'll get the latest version, but I'll lose all my saved bookmarks unless I follow some hectic procedure to save them and load them again after installing the latest version of Firefox'''. I don't want to let that happen either. So, can anyone suggest me a way out of this situation without losing my bookmarks?
Almost forgot. I tried several times by going to '''Help>Check For Updates...''', but every time it returned the same result: "There are no updates available. Firefox will check periodically for updates." How come no update is available while the version I'm using is 3.6.18 and the latest version is 5.0.1? In short, '''Check for Updates...''' didn't help either. (Even when I updated it last time, shouldn't it have updated itself from version 3.6.13 to 5.0.1 directly?)
So, can anyone suggest a way by which I won't lose my bookmarks and would be able to update to the latest version directly too? An answer that wouldn't involve removing the current version and installing the latest one, but directly update to it (it's okay if it needs downloading) would be more welcome. I know that the bookmarks can be saved in a file and all, but I'd like to know if it's possible as it happened for my current version from previous version. (It downloaded and updated itself on its own, disturbing nothing, not even logged me out of certain accounts where I stay logged in. The only problem there was that it wasn't updating directly to the latest version.)
I hope the aforementioned details make sense and are helpful enough for others to help me. Thanks.

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Is there any Function module available for GR IR for purchase order

Hi
Is there any function module available in SAP to get the list of Goods Received and Invoice Reciept for a purchase order.
One way to create a custom fuction to fetch the details from MSEG and BKPF.
Can somebody suggest a better solution.
Thanks in advance.
Ruhi Hira

Which table in BAPI_PO_GETDETAILS exactly has these information ?
PO_HEADER_TEXTS
PO_ITEMS
PO_ITEM_ACCOUNT_ASSIGNMENT
PO_ITEM_SCHEDULES
PO_ITEM_CONFIRMATIONS
PO_ITEM_TEXTS
PO_ITEM_HISTORY
PO_ITEM_HISTORY_TOTALS
PO_ITEM_LIMITS
PO_ITEM_CONTRACT_LIMITS
PO_ITEM_SERVICES
PO_ITEM_SRV_ACCASS_VALUES
RETURN
PO_SERVICES_TEXTS
EXTENSIONOUT
NFMETALLITMS
Regards
Ruhi Hira

HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. I recently updated Pages but it is not consistent.

I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

How do I download a movie to my phone? when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'. I have activated icloud, but this has not helped.

How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.

I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

There is no iView available for system "SAP_ERP_Manufacturing"...

Hi out there,
I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
Best Regards
Juergen Kuechle.

Hi Thulasi,
sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
Regards, Juergen.

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Is there a Polarizing Filter Available as a Plug-In?

Similar Messages

Maybe you are looking for