Is there a possibility to apply sysprep to a 2nd HDD?

I had a Windows 7 Prof. x64 installation on PC "A" up and running and recently the current started to smell (defectice mainboard).
As PC "A" hardware is completely outdated my plan is as follows:
- install Windows 7 / 8.1 on a new PC "B"
- connect HDD from PC "A" as 2nd HDD in PC "B"
- execute "sysprep" for this 2nd HDD
- make 2nd HDD now 1st HDD in new PC "B"
- boot PC "B" to take over configuration of former PC "A" to new PC "B"
Question: Is there now a possibility to execute sysprep for this former PC "A" HDD? Maybe I need to set the PATH variable to fix to new driver letter?
I would appreciate any tip/advice to prevent full installation of all of the applications.
Thanks,
Bernd

Sysprep is not designed to be used to migrate an existing installation to new hardware. I would simply replace the board in the machine and boot the OS and reinstall the appropriate drivers. Make sure that the new board is similar to the old one, example,
don't switch from an Intel to AMD chipset.

Similar Messages

Is there a way to apply LUT's to a photo in Lightroom? Such as .cube, Vision Color, etc.

Is there a way to apply LUT's to a photo in Lightroom? Such as .cube, Vision Color, etc. I have some film stock and Osiris LUTs I like to use for video that I'd love to apply to RAW still photos in Lightroom. I know it's possible in Photoshop CC but the process would save me time if it's possible to easily do in Lightroom 5. Anyone know?

Unfortunately, you can't do it in LR. You could add your vote and opinion to this topic in the official Adobe feedback forum: Lightroom: Ability to use 3D LUTs.

Is there a way to apply sound effect to each application?

Hello, I use x-fi surround 5.1 usb and windows 7-64bit.
I like to play Elder Scrolls: Skyrim with stone hall EAX effect and winamp playing other mp3s.
Is there a possible way to apply EAX only to Skyrim game and not winamp?
It seems that no thread is talking about this issue. I really appreciate if someone gives me directions or hints.

Hi,
Sorry I don't think that is possible. EAX effects applies to all sounds when it is enabled.

Is it possible to apply service packs to NW04s ABAP Sneak Preview?

Service Pack 7 to NW04s contains the DEMO_REGEX_TOY, which I'd like to install in my ABAP sneak preview system. I have some questions about that:
1. Is it possible to apply maintenance to the Sneak Preview?
2. What service packages need to be isntalled to upgrade the sneak preview rel/level from 7/5 to 7/7: 6 and then 7, or just 7? That is, are those service packs cumulative?
3. I am unable to download the service packs from https://service.sap.com using the download manager. I get an error in the trace output that says, "Unable to Find Certification Path." I have no idea what that means, or how to circumvent that problem. Is there an alternative way to get the Service Packs?
Thanks for any help/guidance you all can provide!

Thanks.
I did manage to download the packs. For others who may have similar difficulties, the solution to my download problem was to specify (in IE) http://service.sap.com as a trusted site. That allowed Download Manager to get the files.
I'll also add that I successfully applied packs 6 & 7, as well as SP 70020 (required to update SPAM before applying pack 7) and am now in business!
(Not sure I have the correct terminology for those - here's the file names I applied: KB70006.CAR, KB70007.CAR, KD70020.CAR)

Is it possible to apply a stroke effect to a Photoshop image in After Effects?

Hello,
I've imported an image (a maze) from Photoshop into AE, and I want the image to appear as if it's being drawn in using the Stroke animation. Is it possible to apply some kind of path along which the image can "fill in"--similar to how you can do this with text? I didn't see a way to convert the image into a shape layer on which I could apply the Stroke effect, either.
Thanks to everyone who's been so helpful in these forums--I've gotten a lot of questions answered by y'all!
meredith

Followed everything you said up until using the solid as a track matte, where I got a little confused.
The effect worked more or less how I wanted when I set the starting value of the stroke at 100% and set track matte of my original image to Alpha Inverted. When I did this, it gave the effect that the solid was disappearing to reveal the original image, if that makes any sense.
Is there anyway to adjust the brush shape? Right now it is a circle, is it possible to change it into a square? The circle brush gives an awkward edge line as the lines of the image begin to appear with the stroke effect.
Thanks!

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
If your hardware supports more recent versions then:
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Is there a way to apply a precise value of how round the STBuffer() applies to a geography?

Hello,
I am attempting to work on moving my data into SQL Server spatial geography. I have a valid geography and am able to apply a buffer of (150 feet or 0.3048 meters) as shown below.
My question is there a way to apply a precision to how smooth the buffer is made ? I currently have MapInfo software and it allows me to apply "25 segments per circle" where the 25 can be whatever I choose (buffer is the red ring shown below which
appears not as wide as the SQL server buffer above) Please ignore the cropped portion of the red-line below; however, I was just trying to give a visual of what the buffer looks like now in my MapInfo format...
Is this possible with SQL Server Spatial?
Thanks in advance.
Nick

STBuffer won't do this (it has only one parameter), and after looking at the "BufferWithTolerance" and "Reduce" methods, I don't think they'll do this either. In a single method call. However, you may be able to produce the same results
with a series of method calls. That is, buffering combined with calls to STCurveToLine/CurveToLineWithTolerence and STIntersection or STDifference. Or one of the spatial aggregates. From your current description it's hard to figure out what you're looking
to do. You're trying to reverse-engineer something in a specific product, so figure a complete description of how it works.
But, unless I missed something, it will take multiple spatial library calls.
Hope this helps, Cheers, Bob

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

In the US I have not seen a state that allows an individual to claim tax exemption...that is reserved for authorized institutions like public school systems. Only certain states do not have no-sales tax laws. When I lived in France, to be free from VAT one had to be a non-citizen and would be reimbursed for goods that were shipped out of the country upon exiting the country...not while still residing there. That was pretty typical of other European countries at the time, Pre-EU days, that is.

Is there any possibility of connection between QM notifications and the WL in Collection Management?

Dear ALL,
Our duty is to find any possibility to show (and to manage, of course) on the Collection WorkList, not only open items already registered in FI-AR, but also any notification registered under the QM module, bearing in mind that it is not an open item, yet.
Is there any possibility?
Thanks in advance.

in short the answer is no.
You could look at customer disputed objects and using them, but you would need to re-key the data, there is no standard way of transfering data from QM to create a dispute.

Is there any possible to display the text in big font in screen painter

HI all!
i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

HI
CALL METHOD o_dyndoc_id->initialize_document
      EXPORTING
        background_color = cl_dd_area=>col_tree_level1.
    DATA : dl_text(255) TYPE c. "Text
    CALL METHOD o_dyndoc_id->add_text
      EXPORTING
        text         = 'Flight Details'
        sap_style    = cl_dd_area=>heading
        sap_fontsize = cl_dd_area=>large
        sap_color    = cl_dd_area=>list_heading_int.
* Display document
    CALL METHOD o_dyndoc_id->display_document
      EXPORTING
        reuse_control      = 'X'
        parent             = cont
      EXCEPTIONS
        html_display_error = 1.
    IF sy-subrc NE 0.
    ENDIF.
by using these methods you can achieve i hope..
have a good day.
regards
sarves

Need to take monthly report for SQL statements...Is there any possiblity?

Hi,
We have a requirement to find out the list of expensive sql statements in our ECC 6.0 system.
I am aware that we can see expensive sql statements which are being executed online in the TCode ST04 or DB02old.
But I want the list of statements on a monthly wise.
Is there any possibility to find out the list of expensive sql statements for the previous 3 to 4 months?If so, how do we do that?
Any report or Tcode with navigations.
Please help.
Regards,
Sudheer.

Hi,
> We have a requirement to find out the list of expensive sql statements in our ECC 6.0 system.
nice.
> I am aware that we can see expensive sql statements which are being executed online in the TCode ST04 or DB02old.
expensive SQL in DB02, really?
> But I want the list of statements on a monthly wise.
> Is there any possibility to find out the list of expensive sql statements for the previous 3 to 4 months?
> If so, how do we do that?
Up to now there is no transaction available with such information. The databases partially offer solutions.
These are switched on by default of have to be setup before they could be used. So it depends on the
database and the database version which are you using.
On ORACLE 10g for example we have the AWR (Automatic Workload Repository) which should be switched on by default (depends again on the license). On ORACLE 9i statspack is available but has to be activated first.
On DB6 (latest database and SAP release) we have the so called performance warehouse.
On other databases there might be solutions too.
Besides that you can always built your own solution and grab the top 10 SQL statements from the SQL cache and
persist them in regular intervals. I have seen such solutions as well.
Kind regards,
Hermann

Is it possible to apply a condition on a single column?

Morning All,
Is it possible to apply a condition on a single column? My aim is to create a report that has multiple PTD columns, each based on a different Version ID.
I've tried creating a calculation using the case statement shown below, however I get a blank column with nothing in: CASE WHEN VERSION_ID = ‘10’ THEN BALANCES.PTD END
I know this can be done through a DB view/custom folder, however I’m looking for a solution that can be created in Desktop / Plus.
Cheers,
Lance

OK. Hope this explains the problem well.
This is the Crosstab Report without Annual Budget Column which looks great, all figures correct.
http://vodashare.com/show.php/2929_Pic1.jpg
After Adding Annual Budget column,
http://vodashare.com/show.php/2930_Pic2.jpg
This is the Table version of the above report with Annual Budget column
http://vodashare.com/show.php/2931_Pic3.jpg
Calculation Used for Annual Budget is
SUM(( CASE WHEN ( ( Actual Flag = 'B' ) AND ( Status <> 'C' ) )
THEN ( NVL(Period To Date Cr,0)-NVL(Period To Date Dr,0) )
ELSE 0 END ))
OVER(PARTITION BY Account,"Period Year" )
According to the conditions ( Actual Flag = 'B' ) AND ( Status <> 'C' ), amount is calculated adding the (Cr – Dr) amount when these conditions are satisfied. But, How can I make sure the value is displayed only for rows that these conditions are satisfied?
As you can see, it also displays the columns where Actual Flag != 'B' and Status = ‘C’
Also, I wonder why the Crosstab worksheet with Annual Budget doesn’t display some of the amounts (Ex: for Account 301010, no Annual Budget is displayed where as in Tabular worksheet it is $5721017.50) and for the amounts displayed, why are they displayed at different levels of Sub Accounts?
Note: I do get a warning when I Add the Annual Budget to worksheet.
'You are combining a detail data point with an aggregate data point This may give you unexpected results'. But I am not using any detail items as data points.(not considering Status and Actual Flag, got same message even after removing those)
Please let me know if you find a solution for your requirement Lance, that would help me.

Can´t sync movies with iTunes 11.1.4 (on Mavericks 10.9.1) to iPhone 4S with iOS7. Is there a possibility to reset the sync on iTunes?

I produced some videos in iMovie 10.0.2 and transfered they to iTunes 11.1.4.
That worked so far....
After that I´ve compressed the movies for the use with iPhone and iPod
.....also worked.....
Then I tried to sync the movies to my iPhone4s with iOS7.0.4. The sync starts, runs and ends without an error. But after that I can´t find the movies on my phone. There is enough free memory on my phone and I also tried to shut the movie app and restart my phone. The movies are still not there.
When I check what´s on my phone with iTunes (iPhone connected), iTunes says the movies are on my phone!?!?!?
Maybe there are some troubles within a sync "library" or something like that? Is there a possibility to reset the sync services or whatever is responsible for the sync?
Or maybe somebody has another solution which solves the problem!?
The strange thing is that my music, books and all the other stuff will sync fine!
Hope that someone can help me with this issue.
thanks a lot

I´ve fixed this issue as follows:
1) did a backup of the iPhone in the cloud
2) reset the iPhone in manufacturing mode
3) restored the backup out of the cloud
After that the sync with iTunes worked well also with movies.

Hi there, i want to buy a registered version of PS CS4 (and an Upgrade to CS6)from a private Person...is there any Possibility to check if the Adobe ID,Licence,User is a real person...or a fake before buying it? Thanks for helping!

Hi,
just got an offer from a private Person, who owns a boxed Version of Photoshop CS4 (DVD) and an Upgrade from CS4 to CS6....he told me that he can transfer the current license to me... now there's one important question for me...
Is there any possibility to check his Adobe-ID (which he already told me) if it's the same adress, name,etc. as he told me...
or if there is an registered Version of PS CS4 owned by this Adobe-ID?
Just like to check if he's a real person or a fake...don't want to buy any stolen or illegal software...or beeing punked after paying the money...
Thank you very much for helping me! :-)
Chriss

Old versions of Photoshop are not marketed by Adobe. Only CS5 can be upgraded to CS6. There are many scams on the web if you find a cheap copy of Photoshop out there its most likely a scam... Be careful.....

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

Is there a possibility to apply sysprep to a 2nd HDD?

Similar Messages

Maybe you are looking for