Is there a possibility to disable the DESIGN MODE within BEx Analyzer 7.0?

We need to disable the DESIGN MODE in the BEx Analyzer 7.0.
Does someone know a possibility to restrict the access?
Thanks in advance,
Ulli

Yes, it is possible to restrict the design of already existing workbooks.
You may go to Workbook Settings, enable the option, 'Password Protect Workbook' and keep a password
which may be known only to the people who can change the structure of the workbook.
When this option is selected, if you goto design mode, it would prompt for a password, and if correct password is entered, only then be allowed to add/modify design items.
I hope this helps.
Regards,
Gunjan Narang

Similar Messages

Unable to switch to Design Mode in Bex Analyzer

Hello,
I am trying to switch to Design mode in Bex Analyzer and am unable to do it. I opened a query. I see the Design mode toolbar but it is inactive, meaning greyed out. How do I make it active. I am using 3.5 version.
Vidya

Vidya,
I've seen this happen in two instances:
1. When someone else has the same query open and you can only open it in Query Designer in Read mode
2. When you don't have authorizations to change the query.
In both instances you should be promoted about Read Mode when you go into the query designer.
Regards
Gill

How to disable the Tools Button in Bex Analyzer

Hi Guys,
How do I disable the Tools button only in Bex Analyzer so as to avoid the users messing with Query Designer.
Thanks,
Recca

Recca,
Can you do this via authoirsations instead? ie. Allow two types of users, Designers who have access and Users who don't.
User will be able to access the Query Desinger but have no access to create or save. That should suffice.
If you start tweaking with the toolbar it may have wider negative implications.
Regards
Gill

Is there an possibility to disable the new sleep function via power button

Hello i am a dj working with the new os mavericks.
At home i realised that pulling the power butten quickly shuts my mac to sleep.
Then the monitor stays black and i cant return to the desk so i forced to shut down the mac pulling the power button for 3 seconds.
This new function really is problem for me because everytime i used it i didnt want to shut it to sleep.It was by writing fast or something without wanting it.
Now im really scared when im at work putting music in the club it happens and the music goes off...this really cant happen so i need a solution to get my
power button work like before.

Sorry, but it is not possible. And yes, you would probably be better off buying an actual watch.
B-rock

Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

Is there any way to disable the lock screen with out the screen staying on?

I know there is away to disable the pass lock but is there a way to disable the screen from locking every time the screen goes off? cause it's so much easier to just press the answer button than to slide it to unlock. phone versions iPhone 4s and iPhone 5c.

You're confusing a direct answer with a rude one. Wjosten's reply wasn't rude. It was accurate and direct, without any sugercoating. You can't get the device to operate the way that you want (lock the screen, but not really 'lock' the screen). It's not a 'screensaver' like on your computer. It's a lock screen, designed to prevent accidental activation of the device screen, and possibly launching apps, making phone calls, etcetera.
If you want an option added that allows the device to do what you want, tell Apple.
www.apple.com/feedback
This is a technical assistance forum, not an 'emotional assistance' forum. Wjosten was not rude or insulting in any way. You were.
This is where we tell you how to solve your technical issues. There are no shoulders to cry upon here.
Direct, accurate information. That's what wjosten provided.

Is it possible to disable the 'edit layout' link on the record detail page

Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

Is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES

greetings all .... is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES . i have this ....................
{ OAMessageTextInputBean bi = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("BI") ;
System.out.println("BI"+bi.getValue(pageContext));
if ((bi.getValue(pageContext)) != null)
{ pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
System.out.println( "PM");
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
String paramPR = prnum2;
Serializable paramPRParamList[] = { paramPR};
am.invokeMethod("paidManuallyUpdate", paramPRParamList);
System.out.println( " THE VALUE OF THE Cancel RB IS " + canx.getValue(pageContext));
prnum1.setValue(pageContext, "");
pReason1.setValue(pageContext , "");
//either one of these confirmations will work . i use one or the other
throw new OAException("Payment Has Been Updated To Paid Manually", OAException.CONFIRMATION);
//or
OAException msg = new OAException("Updated To Paid Manually", OAException.CONFIRMATION);
pageContext.putDialogMessage(msg);
the problem is if i include the setForwardURL my confirm messages dont work. if i dont include the setForward they work.
is there a way to do the setForwars so i can redirect the page and make the table inactive and also use the confimations. i can see its going past my system.prints. it just isnt popping up my confirmations as i believe its due to the IGNORE_MESSAGES.
any insight ....
cheers.

Hi,
SetForward*()...It lets the current page processing complete. Your following code will complete its processing, after that it will be forwarded to next page.
ForwardImmediately.... Forwards immediately without letting remaining code process.
However, a good thing is pageContext of the same page is forwarded. That means, if you did pageContext.putDialog(message), in current page, that will be forwarded in both the cases to next page. Hence, for your problem...
use putDialog method, as stated in previous post and
use forward url as CONFIRMATION, NOT AS ERROR OR IGNORE_MESSAGE.
pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAException.CONFIRMATION); //WHAT YOU HAVE PUT IN DIALOGS AND WANT TO SHOW IS CONFIRMATION.
Please try this.
Abdul Wahid

Question:-Is there any way to disable the installation location/folder of da Adobe AIR Application?

Is there any way to disable the installation location/folder of the Adobe AIR Application or can we skip that part automatically?

xmlns:mx="library://ns.adobe.com/flex/mx" is the spark mx address, which is completely different than the original 2006 mx library.
The thing is: I love AIR, hate spark, loved the 2006 pre-spark functionality. It is so much more convenient and user friendly. Given the choice between having the display seperate from the processing, or having it be convenient and easy to work with, I choose the later option.
For the most part it seems like the AIR api is like a layer on top of the spark - flex system.. I would like to be able to over lay the same AIR functionality on top of the the old system....
Possible or no?

My kids use firefox on my computer. Is it possible to disable the private browsing feature so they can not go on and use it ?

I want the computer to keep a history of all the site they have searched, but can not know for sure if they turn on/off the private browsing function. Is it possible to disable the private browsing function and put a lock / password on it ?
Thanks,
David

Even if it was possible to remove or disable "Private Browsing" then that still won't make it impossible to delete private data like visited websites (history) or cache or cookies.<br />
There are a lot of ways to clear such data, either via [[Clear Recent History]] or directly by deleting the History in the Library or sidebar.<br />
Private Browsing makes it easier because all data is kept in memory and nothing is saved to disk, so nothing needs to be removed.<br />
<br />
If you want to see which sites have been visited then you should look at others means outside Firefox like a router or firewall with a password protected logging feature that can't be bypassed or a program like Wireshark.
* http://www.wireshark.org/download.html
* http://en.wikipedia.org/wiki/Wireshark
See also:
* http://kb.mozillazine.org/Parental_controls

Is there any way to disable the use of the "Delete" key to delete an email message?

It's very frustrating when I hit the delete key and iCloud automatically erases the selected email message. I receive some HTML formatted emails that include a text box that I can utilize to directly reply to something. If I don't make any mistakes at all, I can utilize this box and post a reply. But if I mess up and need to delete text, instead of deleting text iCloud deletes the email message. Is there any way to disable this?
Thanks for your help.

I don't believe it's possible to disable the delete key, but could be wrong. However, if you delete an email in error, you can restore it by pressing cmd + Z to undo the deletion.

TS2755 Is it possible to disable the Messages App

Is it possible to disable the Messages App all together through profiles or a Management tool on an iPad in an enterprise situation?
Currently we are having issues with this App in a work place and want to disable it all together. I've looked through the iPhone Configuration Utility and there doesn't seem to be any option for this. Anyone got any advice?

Hi suyog83,
Have you tried using Apple Configurator instead of IPCU?
https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
You can disable iMessages and Game Center by creating a restrictions configuration profile for "supervised" iOS 6 devices using Apple Configurator. Here's more on how to use Apple Configurator:
http://help.apple.com/configurator/mac/1.0/
Hope this helps!
~Joe

Is it possible to disable the nativeApplication.menu?

hello,
Just wanting to know if it's possible to disable the
NativeApplication.nativeApplication.menus for AIR apps running on
OSX?
cheers

Yes, you can disable the webcam software from automatic loading.
In RUN type *msconfig* and start this tool.
There you will see the tab called Startup. Go to this tab and disable the webcam software (remove the mark).
Then apply the changes and reboot the notebook.
Now the Windows should boot up without the webcam software.
Bye

Is it possible to disable the webcam toolbar on the Equium A300D

Is it possible to disable the webcam toolbar on the Equium A300D at all? (i.e. just access the webcam controls from the control panel or start menu orsomething).
Where the toolbar is on the left of the screen it's extremely annoying, as every time my mouse strays to the left of the screen, up pops the toolbar.
On a couple of apps I use there are docked app controls on the left of the screen, and when the toolbar pops out, covering half of them up, I have to wait for the toolbar to disappear again, which can be extremely annoying if I'm rushing to do something.
Is there any way to disable it from appearing?

Yes, you can disable the webcam software from automatic loading.
In RUN type *msconfig* and start this tool.
There you will see the tab called Startup. Go to this tab and disable the webcam software (remove the mark).
Then apply the changes and reboot the notebook.
Now the Windows should boot up without the webcam software.
Bye

Is it possible to disable the Welcome screen?

Is it possible to disable the Welcome screen?

For Captivate?
Assuming the answer is yes, the next question is for what version?
Assuming the answer is 8, there doesn't appear to be a way.
Assuming the answer is 7 or earlier, sure!
Cheers... Rick

Is there a possibility to disable the DESIGN MODE within BEx Analyzer 7.0?

Similar Messages

Maybe you are looking for