Is there a pre-amp plug-in?

Is there a pre-amp plug-in for microphones?
We have a USB mic. Thanks ahead of time.

bigintheburbsinc wrote:
Is there a pre-amp plug-in for microphones?
even if you find it, it won't work with GB. all of GB's effect plug-ins are rendered POST, no effects are PRE
and you can change them at any time:
http://www.bulletsandbones.com/GB/GBFAQ.html#nondestructive
(Let the page FULLY load. The link to your answer is at the top of your screen)
using any of GB's various compressors may help get the sound you're trying to achieve

Similar Messages

Pre-Amp Xfi Fatali

Hello i bought the Soundblaster X-Fi Fatality Professional Series Xtreme Gamer with 64 mb X-Ram soundcard and was wondering if there is pre-amp on the soundcard for the line in/mic jack. I want to know this so i can decide if its suitable for recording from a Mic for studio/production/mix work. Thanks in advance

I haven't tried to on my system. I went from the Audigy 2 plat. to the X-Fi Platinum Fatalty Champion. I was recording from a dynamic mic and found the sound slightly low even with the input volume turned up. If you use a condensed mic with phantom power you may have better results.
Mexdude wrote:
Hello i bought the Soundblaster X-Fi Fatality Professional Series Xtreme Gamer with 64 mb X-Ram soundcard and was wondering if there is pre-amp on the soundcard for the line in/mic jack. I want to know this so i can decide if its suitable for recording from a Mic for studio/production/mix work. Thanks in advance

Just set up an apple TV device to stream music from my laptop to my DAC then into my pre-amp. Set it up on the Tv but then unplugged it and plugged it into the DAC via a toslink cable. No output. The streaming icon is blue on menu bar. That right?

I've just set up an Apple TV device to try and stream audio from my laptop Pro to my DAC, then into my pre-amp. Set it up using the TV screen
but then disconnected it and plugged it into my DAC via a toslink cable. But no output. I don't need it for TV, just sound streaming.
The streaming icon is showing blue on the menu bar - is that correct? Any ideas? Thanks

Hello Draxa,
To troubleshoot this issue where you are getting no audio output from your Apple TV, please follow the steps in the artcile linked to below.
Apple TV (2nd and 3rd generation): Troubleshooting audio issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Questions about Pre-amp of the Tascam FW1884 or M-Audio Project Mix...

Hello everybody,
I'd like to purchase a semi-pro (I hope) audio interface.
The Tascam FW1884 or the M-Audio Project Mix with their "all in one" feature seem to fit for what I want to do.
But I don't know if the Pre-amp or the digital converters are quite good or just awfull.
Are they better or not than the FireStudio from Presonus ?
Since I need at least 8 XLR inputs, the FireStudio seems to be a good choice (but without a remote control, I know...)
Is there someone who have an answer ?
Thanks
Vincent
PS : pardon my English, I'm desperatly French

I have a ProjectMix and I like it. There are others that I know that like it, and there are others that don't. I've actually gotten some really nice results at times with it along with my Tube Condenser and Ribbon mics when I need it. I also plug my electric guitar into it, and I like what I get from it. It's not my main interface, but when I do use it for recording, I haven't been disappointed with it.
jord

Can I set the audio INPUT to my pre-amp, and audio OUTPUT to the built in?

I am using Logic Express 7. I want to set the audio input to my Firefox pre-amp, but set the audio output to my computer's built in speakers. I want to essentially record into the pre-amp and listen to the playback through my speakers. I can easily do this in GarageBand, but haven't found a way in Logic.

The remaining problem I'm having is when I record into an "Audio" track via my microphone which is plugged into the Firebox, I'm still only hearing the playback from the Firefox headphone jack, not the computer's built in speakers.
Did you select your new aggregate device in Logic's audio preferences? If so, then the problem is probably with your settings in the control panel which controls the Firebox - I don't use it, so I don't know what it's called, but it controls the routing and monitoring for the Firebox. Check the Firbox manual - there are probably two settings, one for playback and one for direct monitoring when tracking.

Help on either using a DI Box or a Pre Amp?

I recently bought an iMac 3.06 and I was wondering whether i should use a DI Box or a Pre Amp to connect my bass guitar through the Mac. I have no idea what I am doing any help would be great!
Thanks Nick

Hi Nick
Welcome to Apple Support Communities
Actually there are a couple of inexpensive little gadgets that will allow you to connect your guitar to the iMac.
An [MXL iBooster Guitar|http://pro-audio.musiciansfriend.com/product/MXL-iBooster-Guitar-and-Mic rophone-Interface?sku=243800] to the 3.5mm Input Jack.
Or a [Griffin iMac|http://www.griffintechnology.com/products/imic> to a USB port.
Dennis

Using G4 iTunes to connect to pre-amp

Is the headphone port my only way of sending iTunes to my pre-amp? If not, can I use the firewire or a USB port (or something else)? Will I get better signal quality by using the latter?

Sorry for the late reply,
At the lower area of the back of my G4 MDD Dual there are 3 Holes for mini jacks.
1- (has ear phone icon indicator) for phone jacks
2- (audio icon) Line in
3- (audio icon) Line out
From manual, G4 Audio Specs G4 MDD Dual:
Front headphone jack
Built-in speaker
Stereo audio line in and line out minijacks
Apple speaker minijack for connection to optional Apple Pro Speakers
which G4 do you have ? perhaps, a different model ?
TTab

Audio "pre-amp" settings

Captivate v5.5
I opened a project that was created in v4 with v5.5 in order to edit it.
I needed to add some slide with audio and change some of the audio on some of the existing slides.
When I came to check my work the new audio was at a very low volume level compared to the original slides (created in v4).
After checking all sound settings on my PC and within Captivate I noticed the following "Pre-amp value":
I dont recall what the value was but I moved it up to "2" and that appears to have solved the problem.
1. Is there a suggested best value for the Pre-amp" ? What level do you have yours set to ?
2. Is setting the "pre-amp" value something you should be made aware of when you first launch Captivate ? If I had been aware it would have saved me a lot of wasted time.
Noel

This value affects the gain applied to the microphone input. If your microphone is very powerful, you'll need to reduce the Pre-Amp value. If your mic is weak, you can crank up the pre-amp to compensate.
Once you set this value in a project file, Captivate remembers it. So if you are using the same microphone all the time, you just set it when you start recording voiceover and then forget about it.
I have Rode Podcaster and Blue Yeti USB microphones that I use for recording. I have the pre-amp set to 1 for them.
There is no right or wrong setting. You need to do some experimentation and work out what your mic/s require to give the cleanest audio result that still has sufficient volume.

Pre Amp Problems

Hello,
I recently purchased an M-Audio pre-amp and it is working perfectly with GarageBand but I'm having some problems with Logic
when I open logic I go to the window: audio >hardware and drivers then I choose my pre-amp as the driver and then I enable a track to record and
the levels work perfectly and when I record I cant hear anything.
I think that Logic is using my m-box as an audio IN and an audio OUT when I only need it as an audio IN.
IS THERE ANY WAY TO MAKE MY PRE-AMP JUST BE AN INPUT?
Any help would be VERY much appreciated
Sincerely
-RATM-Man
iMac, Ibenez Bass, Fender Jazz Bass, GarageBand, Logic Express Mac OS X (10.4.8)

You need to create an 'aggregate device' in Audio/MIDI set up (in your utilities folder)
Add your M-Audio device as an input, then add your built-in audio as an output.
Now go to Logic's preferences -> audio -> drivers and in the popup you should now see your new aggregate device. Select it.
That should work. This is a common question, so if you search on "aggregate device" you should see a lot of posts that might help if you are still having problems.

Joe Meek Twin Q Pre-Amp and Elite Pro SPDIF/Digital input probs

Hi. I'm wondering if anyone can help. I've just purchased a Joe Meek Twin Q Pre-Amp and I specifically bought it for a new Rode mic I've just got and it needed phantom power. I also paid a little extra for the digital 'outs', thinking I could take an optic or SPDIF out into the Elite Pro breakout box. The problem is, is that digital is not recognised at all - in Audio Codes it states it's an invalid signal. However, SPDIF is recognised saying it's a stereo signal at 48,000hz, but is only being 'heard' in my right channel.
I have tried the line out into Line In 3, and there's no problem there. Joe Meek representative said it should be working as long as the bit match is the same in both units, which as far as I know is. Am I missing something here? I'm awaiting Creative to get back as it seems to me to be a breakout-box hardware problem, but I could be missing something?
Does anyone have any experience and/or advice/info?
Thanks in advance

Well, since you're not getting response, let me see what I can do.
I think you're saying the optical connection isn't working, but the coax (SPDIF) one is working, and then you're only getting the mic signal on one channel. The second part is easy to explain, but I never remember the solution suggestions. TOSLink/SPDIF, essentially, are stereo signals, and your preamp is simply putting its channel 1 signal on one side and its channel 2 signal on the other. If you had a second mic connected to the other connector, you'd have one mic on the left channel and the other on the right channel. Basically, you need to treat it as a mono signal and then either pan it into the stereo field, or just duplicate (convert) it to stereo. I'm sure there are ways, but someone else needs to join in with some experience. I'm not sure, but it seems to me if, say, you've put the mic in the channel 1 connector, you could take the channel 1 (analog) output and patch it into the channel 2 line input, and your digital outputs would probably get you the mic signal on both sides.
On both devices, the TOSLink/SPDIF signals are, to the best of my understanding, basically the same thing in two forms. If one is working, than the other should be working too. That suggests to me either hardware brokenness in the preamp's optical out, or the Elite Pro's optical in. or a problem with the optical cable. CL's optical outs can be checked to see if they are putting out red light: if they aren't, there's a problem. That probably applies to the preamp, in this case. You can simply connect the Elite Pro's optical output to its optical input and record something from the digital input device. If that works, the cable and the digital input are probably OK, and it most likely the preamp's digital output is broken (although it could be a strange compatibility issue). If it fails, then it's most likely either a bad cable, or the Elite Pro's optical input is broken. Trying another cable, or some other piece of gear you have that outputs optical, ought to sort out which it is.
-Dave
[email protected]

System volume pre-amp

Sometimes I find some recordings are not loud enough out of my ibook built in speakers. iTunes has a nice pre-amp in it but if I am watching a youtube clip or something through quicktime or any number of other programs, I don't have any way of boosting the volume above 100%. I realise that this may sometimes lead to noisiness but choosing what amount of nosiness vs quietness suits me would be nice.
Does anyone know a trick or a utility to download that will give me a pre-amp that works acorss the whole OS?
Thanks in advance!

There are probably cheaper solutions, but Audio Hijack Pro has Effects that can be used to raise the volume of any application.
<http://www.rogueamoeba.com/audiohijackpro/>

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in Iphoto. A few days ago my sispluggeditintoanothercomputerbutidon'tknowwhatshedid

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
I need help stat! Please help!

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Canon T4i and can't load RAW photos into Photoshop 5.1. Is there an extension or plug in for this?

The question says it all. Trying to load my RAW pictures from my Canon T4i using Photoshop 5.1. It says it does not recognize this version of RAW. Help?
Is there an extension or Plug in?
I remember it used to work until I did an update.

Photoshop 5.x is ancient, from last millennium. I'll assume you meant Photoshop CS5.1.
The highest version of ACR, the Adobe Camera Raw plug-in, that will run on Photoshop CS5.x, is ACR 6.7.
The Digital Rebel T4i = EOS 650D = EOS Kiss X4i was supported by ACR for the very first time in ACR 7.1, which needs at least Photoshop CS6 to run.
Your recollection is faulty. You will never be able to open raw files from that camera directly from CS5.1.
You need to look for, download and run the free, standalone Adobe DNG Converter 8.7.1 on each and every batch of Canon raw files from that camera in order to convert them into raw DNGs that you can open in your versions of Photoshop and ACR.

Does anybody know if and when there will be a plug in for raw files from the Nikon D810? I have lightroom 4

I am considering buying a Nikon D810 but I do not want to be waiting for ages for a plug in for it's RAW files on my Lightroom 4. Does anybody know if and when there will be a plug in? I presume the 8.5 plug in will not cover the cameras Raw file.

There is no plug-in for Lightroom 4 that would ever give you support for the new camera. Lightroom does not use Camera Raw. Camera Raw is a plug-in for Photoshop and Photoshop Elements. If you want support for your camera in Lightroom you will need to upgrade to Lightroom 5, and then wait for the 5.6 update which should be available within next few weeks (unless Lightroom 6 is introduced). In the meantime you can use the DNG converter (version 8.6 RC) to create DNG copies of your raw images that you would be able to open in Lightroom 4.

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

The add-on you are looking for may no longer be available.
Do you remember its name?
Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.

Is there a pre-amp plug-in?

Similar Messages

Maybe you are looking for