Is there a preferred Video Camera in the forum for use with FCE?

I am on the hunt for a new HD camcorder in the 800 to 1200 US dollar range. Is there a preferred recording format or anything specific to look for that will help my camera work best with FCE or better yet are there things I should try to avoid?
I am looking for something compact so that I can carry it with me on trips easily, but still give a good quality HD image. Thanks

The main consideration is that AVCHD is a hard drive based format whereas HDV is tape based. The nature of tapes is that they're relatively inexpensive so it's not such a big deal to save your tapes as backups in case you ever need to restore your project from the original footage. For AVCHD on the other hand, you'd need to make a backup by copying the whole file directory to an external drive for safe keeping, and if the drive fails or gets corrupted then you are out of luck.
There are other less important things to keep in mind. AVCHD can reach a maximum resolution of 1920x1080, whereas HDV by comparison reaches its peak at 1440x1080. I've heard some say that AVCHD cameras generally work less well in low lighting conditions, but I personally haven't noticed too much of a difference. Finally, the market seems to generally be moving away from a tape based workflow. Not that AVCHD is exactly the format of the future (and you'll certainly be able to purchase DV tapes for a while to come), but it's something to keep in mind. FCE deals with the two formats differently as well, and it might be wise to skim over both the section in the User Manual about capturing and the one about the "Log and Transfer" process.
As far as bugginess is concerned, I wouldn't say that one format is prone to more problems than the other. As long as you read up on the capture or ingest process before attempting anything you should be fine.
Finally, keep in mind the fact that FCE transcodes both HDV and AVCHD into the Apple Intermediate Codec upon capture or ingest. AIC usually runs at about 41-50GB per hour, so you'll want to make sure that you have a fast external firewire drive to use as a scratch disk when editing to store your media.
Sasha

Similar Messages

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Is there an upgrade to Photoshop Elements 5.0 for use with Windows 8?

    Is there an upgraded to Photoshop Elements 5.0 for use with Windows 8?

    yes, photoshop elements 11 should be compatible with win 8 and there is an upgrade path here:  http://www.adobe.com/products/photoshop-elements.html
    (compatibility info:  http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/ProductViewerWithD efaultFilters?Architecture=X64&CurrentPage=0&TotalPages=-1&ShowCriteria=10%20Results%20Per %20Page&SortCriteria=Relevance&IsSearchWithinFilterAvailable=False&FilterByCompatibility=A LL&TextSearch=Photoshop&AbsolutePage=-1&LastRequested=13&LastSearchTerm=Photoshop )

  • Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    This is an Altec Lansing IMT227 OrbitM etc
    Is this what you have?
    Here is the specification, please note, no USB
    You are either mistaken or talking about a different model.

  • I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    FCE only used AIC for HD.
    Al

  • Getting video compressed in MPEG Streamclip for use in FCE

    I have AVI video created by a Flip Video device. The video and audio work fine in QT, VLC, and in the Flip Video software. However, when I open the video in MPEG Streamclip I get video but no sound! I need it to open in Streamclip so I can convert it to DV video for editing in FCE.
    Following conversion there is still no sound. Any suggestions??

    Where are you monitoring the sound? In what application? Did you export from Streamclip to DV or to QuickTime?

  • Is there a universal way to configure time capsule for use with magic jack plus?

    I've got the magic jack plus connected to my time capsule.  Works most of the time, but lately it's been dropping calls or I'll get error messages stating to check the internet connection.  Most say its related to the router settings.

    Note I do not own magic jack but it looks like a standard ATA voip adapter.
    How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
    Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
    Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
    Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
    Look at posts that deal with issues which will be common with airport extreme.
    https://discussions.apple.com/thread/3662236?start=0&tstart=0
    I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

  • NEW IN THE FORUM - HAVING PROBLEMS WITH FCE

    Hi everyone!
    My name is Mauricio and I am having problems in figure out how to use the FCE. I can copy my AVCHD files from my Sony CX100 but once I input it in the time line I can't(or can not find how) edit the frames and also how to mix music tracks with the original sound.
    Please, could someone help a FCE beginner???
    Thanks a lot for the time and attention.
    Mauricio "Big Mac"

    Welcome aboard Big Mac,
    but once I input it in the time line I can't(or can not find how) edit the >frames and also how to mix music tracks with the original sound.
    Normally you don't edit in the Timeline.
    You move a clip from the Browser to the Viewer.
    In the Viewer you select _in and out_ points to define exactly which part of the clip is required. If you don't define in/outs the whole clip will be entered.
    Then move the clip to the Timeline. A simple method to do this is drag the clip in Viewer to the Edit Insert (yellow panel) Overlay of the Canvas. This will drop the clip at the playhead point in the Timeline.
    Al

  • On iPhoto you can click info and see which camera was the source for the photograph, is there any way to identify which camera took the video on iMovie?

    Is there a way to determine which camera was the source for video clips in iMovie?  You can do this in iPhoto by clicking info but I can't find out how to do it in iMovie.

    Not as far as I know.  (you can often tell from the file name format).
    Geoff.

  • I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    tyler57,
    it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

  • Disabling the Video Camera on the IPOD Nano

    Is there a way to disable to video Camera on the 5gen IPOD Nano? I like all of the other features of the 5gen, but need to have the ability to disable the camera.

    After talking with a very helpful and polite customer support agent, I was informed that there is no way to disable the video camera on the 5th Generation Ipod Nano.
    I was then given an address to provide feedback to apple, where a request can be made for inclusion of a disable feature in future software updates or 6th generation Ipod Nano's. This does not guarantee that an update will be provided, but it is the only available option, other than purchasing a 4th generation Ipod Nano.

  • Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

    Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

    I don't know if there is an app, but you can take a snapshot of the video.  I do this all the time.   You just need to hold down the power and home key once and it will take a snapshot.

  • I need a wireless option for older Mac desktop is there a good card or adapter  I want to transfer hd video files over the internet.  using a hotspot and wireless card in computer, any recommendations

    Is there a good card I can put in the computer, and use with a hotspot?  Any experience with uploading HD video files this way.  DSL hard wired connection is too slow

    As for the people on eBay, my only beef with them is that it has turned into a money hungry store instead of an auction place to pick things up inexpensively, like it used to be.
    Agreed.
    There is one, in particular, who really puts a dear price on his flashed cards.
    Not a friend to the Mac community.
    Of course, others see his prices, and say "Well, if he can, then so can I".....
    By the way, I have been noticing the same cards, only for PC for around $30-$40, which lead me to believe that those are the ones they are "flashing". Sorry if that's incorrect.
    It's OK.
    I watch for the prime cards all the time.
    Radeon 9800 Pro and XT PC cards have increased to the $50-$70 range.
    Pros used to be $20-$30, XTs $30-$60.
    Some guys here in Japan are trying to get $100 for Radeon 9800 Pro cards- vanilla PC versions.
    The glut in Mac options has inflated the flashable PC card market dramatically.....
    The Mac Edition Pro retailed for $200+.
    $100 isn't bad for that card flashed to Mac... the XT gets $20-$50 more.
    Try telling a PC guy that a Radeon 9800 is a $100 card..... the old boys laugh!
    Adding to this is the recent influx of "new" Mac users, PC modders/users buying cheap, used G4's, and the demand for upgrades has increased as supply decreased.
    If you see any rev 5.70 Geforce 7800 GS AGP cards, or any FireGl (Radeon) X800XT (unflashed) cards for less than $130, amazing is all that I have to say.
    $30-$40, and I'll take 20 of each- cash!
    Hmm, same goes for Geforce 6800 Ultra's......
    I am just a little (or a lot) frustrated with Apple and Apple vendors lately. For obvious and not so obvious reasons. Please accept my apologies as I go through this phase.
    We all have our days, and our reasons. At least, I know I do......
    Apology warmly accepted!
    Count me as frustrated, as well.
    The new machines sure look nice, but when I tally up the price of the software that I own, which can't be run on Intel or 10.6x Macs, my room full of G4's look a lot nicer.

  • Is there an hd video camera which iMovie can read without format conversion

    Is there an hd video camera which imovie can read without format conversion

    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US
    iMovie tutorials:
    http://www.apple.com/ilife/tutorials/#imovie
    and also this:
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html

  • WWHEN I CONNECT MY VIDEO CAMERA TO THE MAC, IMOVIE DOES NOT RECONIZE IT SO IT GOES STRAIGHT TO DVD PLAYER. I AM TRYING TO DOWNLOAD VIDEO IN IMOVIE. SOME OF THE DISC WILL GO TO IMOVIE OTHERS STRAIGHT TO DVD PLAYER

    When I connect my video camera to the mini mac in order to download into imovie it goes directly to dvd player and I can't download into imovie. It does not reconize a camera being connected. This does not happen all the time. Is something wrong with the disc or the camera???

    It sounds like it is mistaking the camera for a DVD disk. So my best follow-up question is to ask:
    1. Who is the manufaturer of your camera
    2. What is the model number of this camera.
    What happens when you quit DVD player. Does iMovie still fail?

Maybe you are looking for

  • Finder window: Grey spinning wheel in status bar and not able to access files?

    Can anyone help with this issue which has utterly perplexed me for 24 hours now. I have all of my photos and videos stored on an external hard drive. Yesterday the hard drive started misbehaving and when I tried to access files it would simply not lo

  • User-exits for PO and MIGO

    Hello Experts i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted. i managed to find certain BADI and us

  • Why i can't use import java...;

    Hi, i'm trying to compile a small piece of java program but the compiler tells me that some of the objects defined are unknown. For example, i imported java.io.* and istanced TextFileReader fr = new TextFileReader(); Is there anybody able helping me?

  • How to append leading spaces in ALV Output

    Hello Experts, Is it possible to append leading spaces in ALV Output? We want to have a functionality that will show the output like a hierarchy in a column. Thanks a lot for your help. Example: WBSElement WBSELEL01VL2     WBSELEL01VL3A          WBSE

  • Suppressing a tab in PR -Item details

    Hi, Can any one suggest the procedure of suppressing Field -Valuation from item details of the PR. Tried with Field selection AKTH-But could not find it Reg SSK