Is there a problem with the OS 5.1 update for first generation iPads?

Double clicking my home button sends my first generation iPad into a black loading screen. The four finger swipe does the same thing. I haven't found a way to access the open programs without this happening.

zphelj,
it reads as though you have a corrupted Mavericks installation at the moment. You can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Are you able to run the 10.9.3 update now?

Similar Messages

Is there a problem with the new i phone update ?

I've just tried to update mine, got an error, it's then asked me to restore & now saying unknown error (-1)

That is typically a hardware error. Try updating on another computer, and if you're still getting that same error, then you definitely have a hardware issue for which the device needs to be replaced

Is there a problem with the itunes and quick time download pages or is it my internet.

Is there a problem with the itunes and quicktime download pages or is it just my internet.

Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a problem with the latest iTunes update?

After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it doesn't happen on my other computer with an older version of iTunes. I've gone through the troubleshooting suggestions for this on the Apple site but nothing seems to work. Is there a problem with the new update? And will it be getting fixed soon?

See Troubleshooting issues with iTunes for Windows updates.
tt2

The file .docx cannot be opened because there are problems with the contents in sharepoint document library

I created a site and created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
in it .
As per my requirement I am saving the above site as site template .
After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
The problem is I am getting error while opening the word document
Error - The file filename.docx cannot be opened because there are problems with the contents .
Details - No error details availble .
Indresh

What are you doing within the txt document? Is it general text and string based items, or have you something more elaborate going on?
An older discussion here elaborates a bit more on the dotx vs docx side of things.
http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Is there a problem with the Firefox synch server?

I have three installations of Firefox 4.0.1 on two machines (two fixed, one PortableApps). They are all set up to synchronise.
Since yesterday, all are showing an error at the bottom of the window saying "Sync encountered an error while connecting: Server incorrectly configured. Please try again."
I've made no configuration changes to the synch in the last few days, nor have I updated the Firefox version.
Is there a problem with the synch server?
Regards
Nick

Firefox Sync - System Status:
* https://services.mozilla.com/status/

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website)

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

The best cover is the one that suites your needs. Try Google. There are dozens on the market.
As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
Have you tried a reset on the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

You haven't enabled VoLTE (Advanced calling) have you? Not that it makes a difference just curious.
Have you upgraded to Lollipop yet?
Could be hardware or SIM card issue, read through this thread:
I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

Is there a problem with the OS 5.1 update for first generation iPads?

Similar Messages

Maybe you are looking for