Is there a processor upgrade available for a Dual 1.8 GHZ G5?

I am looking to upgrade a Dual 1.8 GHZ G5 to 4 processors if that is possible?

Not 4 CPUs, but somebody here in the last month or 3 changed to higher rated G5 CPUs on a slower Logic board, which I didn't know would work, not sure which speeds it was & can't dind anything on Apple of course.

Similar Messages

  • Will there be another upgrade available for iPod touch1st Generation.

    I would like to use my iPod  for more than just music and instagram. I like to be able to use facebook and twitter and imessage. I don't think it's fair that I can't use some of the everydy apps that everybody else can. we should be able to at least upgrade to an iOS 4.0 if anything else

    It is extremely unlikely that there will ever be another update for it.
    This is completely normal in every way.  ALL computers/devices/TVs/dvd players/phones/etc become unable to run the latest software at some point.  There is nothing unusual about this at all.

  • I want to upgrade the memory for my iMac, but on the Apple store there is no memory available for any of the iMac models. Mine has an Intel Core 2 Duo processor with 2.4 GHz purchased about 5 years ago.

    I want to upgrade the memory for my iMac, but there is no memory available for any of the iMac models on the Apple store. I got an Intel Core 2 Duo processor with 2.4 GHz. I purchased it over 5 years ago, and the tecnical support expired. Can anybody tell me where I can purchase additional memory?

    Check the link below.
    http://eshop.macsales.com/shop/apple/memory/iMac

  • I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

    I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • What is the operating system available for Macbook Dual core Intel processor  system

    what is the operating system available for Macbook Dual core Intel processor  system

    Exactly what model? Do you really mean the old MacBook with the dual core processor or do you mean one using a Core 2 Duo  processor?
    The last OS X that runs on a dual core Mac would be:
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • ITunes tells me to upgrade to iTunes 12, but my iMac software updates tell me there's no upgrade available?

    iTunes tells me to upgrade to iTunes 12, but my iMac software updates tell me there's no upgrade available?

    Thanks for the reply. I'm on an iMac running OSX 10.8.5 -- but I don't think that iTunes was ever removed from the Applications folder … and so I'm not clear on whether I should pull it out of the folder and then transfer it back in. Essentially within iTunes I am prompted to download the upgrade, but when I accept it kicks me over to my Software Updates menu on the iMac, where I am told "No updates available."

  • Any upgrades available for Mac OSX 10.5.8?????

    are ther any upgrades available for download for Mac OSX 10.5.8????

    Welcome to the Apple Support Communities
    Mac OS X 10.5.8 is Leopard. Mac OS X Leopard was launched in 2007 and is now discontinued, so Apple isn't releasing more updates for it.
    Your only option is to upgrade to Mac OS X Snow Leopard, if your Mac is compatible > http://support.apple.com/kb/sp575 You can buy it in the Apple Online Store > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • I have an older I Mac operating system 10.6.8 and want to upgrade.  I've been told that the only upgrade available for my machine is 10.7.5.  On what website can I find this upgrade or how do I find this upgrade on the Apple website?

    I have an older I Mac operating system 10.6.8 and want to upgrade.  I've been told that the only upgrade available for my machine is 10.7.5.  On what website can I find this upgrade or how do I find this upgrade on the Apple website?

    Choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (116475)

  • There is no iView available for system "SAP_ERP_Manufacturing"...

    Hi out there,
    I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
    When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
    I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
    Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
    Best Regards
    Juergen Kuechle.

    Hi Thulasi,
    sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
    And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
    Regards, Juergen.

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Portal error in SRM 7.0 -"There is no iView available for  system "SAP_SRM"

    Hi All,
    We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
    With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
    "There is no iView available for  system "SAP_SRM": object "cont". For more information, contact your administrator."
    We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
    Any pointers?
    Thanks
    Arun

    Hi Arun,
    Pls check the portal content and portal roles with iviews maintained properly or not.
    Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
    This might help you.
    http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
    Regards
    Kiran

  • My iPod touch is a model MB528LL running version 4.2.1.  I would like to download the At Bat 12 App (the $14.99 version) so I can listen to professional baseball games this year.  Will there be an app. available for my iPod?

    My iPod touch is a model MB528LL and runs version 4.2.1.  I would like to download the At Bat 12 app. (the $14.99 version) so I can listen to professional baseball games this year.  Will there be an app. available for my iPod this year?

    I went to the link you posted and followed all the steps.  I was thrilled to see that it worked!  I don't recall whether my PC still recognized my iPod Touch as a camera or not, but DEVICES did show up in iTunes and it recognized the name of my iPod Touch.
    Now, though, everything is back the way it was.  The PC tells me I have a camera connected via USB and iTunes doesn't even have DEVICES listed in the left-hand column.
    I'm wondering if this is the problem:  I had the iPod on until the battery was so "low" that it stopped.  I didn't press and hold the button on top.  In fact, until I read the article you linked to, I didn't even know you could turn the iPod on and off that way.  I would only press it once until the screen turned blank and simply pressed the Home buttom to turn it back on.  Until I read that article, I thought the Home button was the On button.
    So now my question is this:  Should I ALWAYS turn the iPod off by pressing and holding the button on top until I see the red slider on the screen?
    Thanks!

  • MSS Work Overview issue "There is no iView available for system "SAP_ERP_HumanResources": object "employee"

    Hello Expert ,
    I am facing the below error when Manager clicks on the leave link under column 'Type Of Leave' . (please refer the below picture)
    There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
    am I missing any configuration ?
    Thanks and Regards,
    Ravi

    Siddharth's response and the SAP Note he mentioned were both very helpful. I received the exact same error message in a different scenario. While the fix was likely different than the one needed in this specific case, it occurs often in custom MSS and HR Admin roles and I hope this helps someone else out. In my case I needed to add the Pages shown below to my Workset and mark them as invisible.
    error message:
    fix in my case:
    Thanks,
    Ben Marsh

  • Usually there is a upgrade path for current users of the software at a reduced price. I dont see anything like that for Lightroom 6. Will I have to pay full price just to upgrade to the new LR6 standalone version???

    Usually there is a upgrade path for current users of the software at a reduced price. I dont see anything like that for Lightroom 6. Will I have to pay full price just to upgrade to the new LR6 standalone version???

    The standalone upgrade is 79 US Dollars.
    Go to Products, select Lightroom 6, click on Buy, select Upgrade instead of Full

  • There is no iView available for system "SAP_ERP_Procurement": object "purch

    Hi,
    We are currently implementing buyer portal 1.5 in NW 7.3 SP4
    Imported BP ERP05 BUYER 1.51,BP ERP05 COMMON PARTS 1.51 in server
    Followed the steps given in the link
    http://help.sap.com/erp2005_ehp_05/helpdata/en/10/f55f5708cb4b08816c66d48064aa35/frameset.htm
    No System created for SRM as we are not connecting SRM system.
    We found the following error when we click
    Display Purchase Orders for Vendor Button
    There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your
    administrator.
    Document Tracing Button
    There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your administrator.
    Regards,
    Satish

    Hi Satish ,
    STEP 1: Login to the Portal with Content Admin Authorization.
    STEP 2: Navigate to Portal Content -> Content Provided by SAP -> specialist
    -> SRM7.0 -> Core -> Roles -> Open Manager and choose Navigation Folder.
    STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
    specialist -> SRM7.0 -> Core -> iViews -> Business Objects -> identy the business object in which ita was ont displaying ->
    Select Display  object ( Technical name is
    com.sap.pct.srm.core.iv_display_ctr ) and right click and choose 'Add iView
    to Role' -> Delta Link and save.
    STEP 4: Log off and login with the user and check the issue.
    Hope this will help you .
    Thanks & Regards
    Pradeep Kumar Dondeti

Maybe you are looking for

  • OBIEE - How to make one presentation variable dependent on the other

    Hi, I have the following requirement. In a prompt say there are two columns acting as filters: Columnfilter1 Columnfilter2 Now the columnfilter2 is constrained based on columnfilter1. The user wants that, upon logging only the columnfilter1 should ha

  • Acrobat X Unable to Uninstall

    I have been having an entirely consistent issue with Adobe Acrobat X. Every time it opens, not only can I not quit the application, but I also can't close any windows that are open in the application, nor can I force quit. Last night it opened up a f

  • QUERY'S

    BUen dia, Tengo una duda con el siguiente query SELECT T0.DocNum AS 'FACTURA', T1.CardFName AS 'CLIENTE', T0.DocDate AS 'F. FACT.', T2.DocDate AS 'F. PAGO',datediff(day, T0.DocDate,T2.DocDate) as 'DIAS', '%' = CASE WHEN datediff(day, T0.DocDate,T2.Do

  • Date display format

    I've built my first SharePoint app with Visual Studio using an Azure SQL database. The app is for the UK and all date fields are in the dd-mm-yyyy format. No problems with the date fields during development except that, when querying the database wit

  • Error with adsplice

    Hi, I just successfully installed R12.1.1 and now I try to install patch 8640014 for CLE. I have to run adplice but when I do so I get these errors: Successfully read file /oracle/VIS/apps/apps_st/appl/admin/newprods.txt. Verifying localizations... V