Is there a property to set the position of a table-scrollbar to the begining?

Hello,
i have a VI which displays a table and the table gets data from time to time.
Are there any properties that i can use to set the scrollbar at the right side to the beginning of the table?
The scrollbar stays always at the last position.
Thx for your help.

The property is "Index values"
Message Edité par chilly charly le 11-08-2007 04:03 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_BD.png ‏1 KB

Similar Messages

Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

IPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

iPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

Based on your answer, and the answer to another question (which I didn't see before I asked mine, even tho I searched), I get the impression that iPad Mail is just a different face on web mail, that the messages are only stored on the server, not downloaded and stored on the iPad 2. Is that correct?

How to include in the sub-menu a table specifies of the user - UDO

hi, forum
how to include in the sub-menu a table specifies of the user
I created a table '@ IA_RELAT' in User-Defined Obejcts but I don't know as including in the sub-menu that I created
it follows my code
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
        If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
            Try
                       <u201DmyTableName->@IA_RELATu201D>
           Catch
                SBO_Application.MessageBox("The Form already exists")
            End Try
        End If
thank you
    End Sub

Hi David
Excuse me but I didn't find in MenuCreationParams Objects how to do this call of the table '@ IA_RELAT' created in User-Defined Obejcts
It follows my code
in AddMenuItems I set up the Menu and Submenu
in SBO_Application_MenuEvent it is where I am having difficulties of showing the table '@ IA_RELAT' created in User-Defined Obejcts
Thank you for any help
    Private Sub AddMenuItems()
        Dim oCreationPackage As SAPbouiCOM.MenuCreationParams
        oCreationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams)
        oMenuItem = SBO_Application.Menus.Item("43520") 'moudles'
        Dim sPath As String
        sPath = Application.StartupPath
        sPath = sPath.Remove(sPath.Length - 3, 3)
        oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_POPUP
        oCreationPackage.UniqueID = "MyMenu01"
        oCreationPackage.String = "Standard cost"
        oCreationPackage.Enabled = True
        oCreationPackage.Image = sPath & "UI.bmp"
        oCreationPackage.Position = 15
        oMenus = oMenuItem.SubMenus
        Try ' If the manu already exists this code will fail
            oMenus.AddEx(oCreationPackage)
            '// Get the menu collection of the newly added pop-up item
            oMenuItem = SBO_Application.Menus.Item("MyMenu01")
            oMenus = oMenuItem.SubMenus
            '// Create s sub menu
            oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_STRING
            oCreationPackage.UniqueID = "MySubMenu"
            oCreationPackage.String = "Auxiliary Table"
            oMenus.AddEx(oCreationPackage)
        Catch er As Exception ' Menu already exists
            SBO_Application.MessageBox("Menu Already Exists")
        End Try
    End Sub
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
    Try
SBO_Application.ActivateMenuItem(menus.Item(1).UID.IndexOf("@IA_RELAT"))
    Catch
                SBO_Application.MessageBox("error")
    End Try
End If
End Sub

Unloading the rarely used column tables on to the persistent layer ?

Hello Folks,
Can someone please let me know how to unload the column tables of a particular schema that are not being used every now and then, on to the persistent layer?
eg: UNLOAD "SCHEMA_NAME"."TABLE_NAME" will unload only a particular table on to the disk, but how do i select the tables that were inactive say since the last 1 week of a particular schema.
Thanks in advance.
Regards,
Krishna

Hi Atul,
Thank you for providing me with the information,As per the link you sent me i am assuming that the process of unloading the rarely used inactive tables on to the DISK is totally managed by the HANA's inbuilt algorithm. But HANA only unloads the tables on to the persistent layer when the memory reaches to or above 90% of the memory, There should be a way out .
BTW its krishna and not Krishana
Regards,
Krishna

Is there a property to set the "Line Style" of the "X" & "Y" Grids of a Waveform Graph?

I found the properties to change the colors, but not the "Line Styles". (I want to change them from solid to dashed lines).

Sorry wd8ivl, I misread the query.
You cannot change the xy gridlines to dash, only change the colour.
Have a look at this post for some ideas.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000097A90000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=grid+dashed&USEARCHCONTEXT_QUESTION_S=0

Is there a way to set all my track Genre info back to the default?

I want all the tracks to be labeled with the genre as if I had just bought it from iTunes. I have almost 25000 tracks, so doing it 1 at a time is not an option for me. If thats the only way I'll just live with it. I'm using Mac OS 10.10.1 and iTunes 12.01.26. This whole thing was caused by using Tuneup Media a couple of years ago and being a little too trusting. Now my genres are a mess. I've been searching online and can't find any good solution. No way I'm trying Tuneup again either!

Did you buy all these from the iTunes Store? If so there may be a way to reload the data from the Store or at worst re-download the files which will include the data (but will likely not end up in your playlists as before since you would have to delete their entries completely from your library). I know you can re-identify CDs but you're getting the genre from whoever submitted the information for the CD.
You don't have to re-do genres one at a time. I know most albums and in fact most artists all get put into a specific genre by me. Select a range of tracks using click then shift+click and get info. Assign a genre. I do it to hundreds of tracks at a time on occasion.

How can I change the position of an entire frame on the timeline?

As I've posted before, I'm very new to flash and am
incredibly green. I've done HTML/Dreamweaver work in the past, but
I had something thrust into my lap that was a bit more complex than
I expected! :)
Anyway, the person that set up the flash document before did
not do the best job organizing frames. The entire document is a
compartmentalised site. So you click on the links to the left, and
it displays the appropriate linked frame. I assume this is a fairly
standard way of doing things?
Anyway, that said...
What I want to do is put these frames together, in proper
order, within flash. I have tried "cutting" the frames, but that
leaves a weird piece behind, and I can't find a way to "insert" the
cut frames back into the timeline.
Is there no option to just move the frame backwards/forwards
in the timeline?
Am I asking the right question?
Thanks so much in advance :)
Nick

you can click once on the frame (or click-drag a group of
frames) to select them, then click-drag the frame or group to a new
position. one can also select the frame, right-click (ctrl click
mac) and select 'copy frames' then you can right click select
'paste frames' as well although this will 'copy' them and not
'remove' them from that position.

Is there a property for mixed signal graphs to control Y scrollbar visibility?

Anyone know if it's possible? I can control the X-scale scrollbar visibility with a property but can't find one for Y-scale and have to do it from the front panel 'Visible Items > Y Scrollbar' context menu. I'd like to be able to configure it at runtime ... clues?

Hi Mike,
I read the property node for the bar plots (after having setting it by hand to the one you like) and it appears that the value of that bar plot is 8. I also set it to a different bar plot by and hand then wrote "8" to the property node and that does seem to change it to the last (left to right) vertical bar graph. I am running LV 7.1. If you look at the context help it does seem to indicate that the only values for vertical bar graphs are 1-3 but try writing "8" and see what happens.
Cheers,
--Russ

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

How to enforce the position of a table in a master slide?

I'm trying to create a new theme from scratch. I've made changes to color schemes, borders and default font for a table. This work fine, however, i can't get the table to show up in a specific position on the slide. It always overlaps with the slide header. Any suggestions how to make this work?

PLD has no support to the SQL code you need. You have to use UDF to get your logic working if you do not want to use any other report tools.
Thanks,
Gordon

[LVC bug] Crash when changing the position of a wire terminal in the icon tab

Hi,
in the attached VI, if I go to the icon tab and try to move the terminal "xa2" up, the GUI crashes.
LVC version 1.0.0.50009
Nicola
Attachments:
do_generate_waveform.gvi ‏112 KB

Welcome to the forum.
It's always best to put different questions in different threads. Sometimes people have the answer to one question and not the other.
There is an article on my site about creating help for left to right languages. You may be able to extract something from that to deal with the tabs.
To get larger images when a smaller one is clicked, there are various options.
You could use a javascript method, there are many that you can find by Googling.
You could put it in another HTML page that just has the image. You could then create an ordinary link or a popup link.
You could create a link from the small image to the large image. (Select the image and then click the link icon. Choose the Link to File option.
Each will work in a different way so you have to decide which you prefer for your users.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I use the value of a table attribute outside the table?

I have two tables that are master detail. But it might not be so obvious to the user before he knows how the page works that they are master detail. The tables are in separate showDetailItems in a panelAccordion and what I was thinking of was to show the value of one coloum in the selected row in the master in the text in the showdetail item that contains the detail table. But I can´t find the right expression to put into the accordion. How should the expression look like to get the value of an attribute in a table for use outside the table?

Thanks for the suggestion but it doesn´t work. The first problem is that the page turns blank when I use that expression for the text in the showDetailItem and the second problem is that I don´t seem to be able to use the master table as a partial trigger. When I click edit in the partial trigger property I can´t shuttle the master table over to be a partial trigger to the showDetailItem even if the table has an id.
Edited by: Atlantic Viking on Apr 2, 2009 6:24 AM
Well I figured out how to come half way. I did the following things:
1) Created an attribute value binding to the attribute I wanted to be shown in the showDetailItem
2) Set the text property in the showDetailItem to this attribute value like this #{binding.attributeValue}
To solve the problem I had with the partial triggers I continued like this
3) Gave other components on the path from the showDetailItem to the master table id´s
4) Clicked edit on the partial trigger property on the showDetailItem and was now able to shuttle the master table over to be a partial trigger.
But I now got an other problem which looks like a bug. At first when I enter the page it looks fine but when I change focus in the master table to another row part of the showDetailItem containing the detail table disapears. The detail table still remains and works as it should but the part containing the text I tried to set above disapears and the text in the showDetailItem containing the master gets replaced by the text that was supposed to be in the showDetailItem containing the detail table. Any suggestions how to correct this are very welcome.
Edited by: Atlantic Viking on Apr 2, 2009 6:59 AM

How to get the select * from emp table output on the console using java

public class software {
      * @param args
     static final String JDBC_DRIVER = "oracle.jdbc.driver.OracleDriver";
     static final String DATABASE_URL = "jdbc:oracle:abc";
     private static Connection connection;
     private static Statement statement;
     public static void main(String[] args) {
          // TODO Auto-generated method stub
     try {
          System.out.println("-------THIS IS THE Class.forNameJDBC_DRIVER");
               Class.forName(JDBC_DRIVER);
               System.out.println("THIS IS THE Class.forNameJDBC_DRIVER");
               connection = DriverManager.getConnection(DATABASE_URL, "abc",
               "abc");
               System.out.println("THIS IS THE connection abc ,abc");
               statement = connection.createStatement();
               //Query to find the values in the EMP table.
               ResultSet resultSet = statement.executeQuery("SELECT * from EMP");
               if(resultSet.next()){
               System.out.println("THESE ARE THE VALUES IN EMP TABLE:"+resultSet); /// How can i get all the values record wise on the console ??????
               resultSet.close();
     catch (ClassNotFoundException classNotFound) {
               System.out.println("Driver not Found"+classNotFound.getMessage());
          } catch (SQLException sqlException) {
               System.out.println("SQL Exception - bad sql");
               System.out.println(sqlException.getMessage());
}

1sai
Please assign the dukes here and in your previous threads.
See [http://wikis.sun.com/display/SunForums/Duke+Stars+Program+-+How+it+Works]
You are currently the all time career leader in un-awarded dukes, with including this thread 75 unawarded dukes for questions you marked as answered.
It's even worse when you look and see that you have awarded many dukes as well. So you do know how to do it. You're just too lazy and rude to be bothered.
Don't be a lazy wank.

How can i join the header and item table to fetch the data

hi experts,
i have a doubt in using inner join or for all entries, for fetching the data from the item table mseg, by taking the doc.no from mkpf. Plz sort out the difference, what happens, if i use the both statements for fetching data

Hi,
Both has same functionality.
but if u are using FAE, u ahev to check for the
~intial condition of the source table,
~ duplicate entries, if any
Inner join will fetch the data from all the join tables at once. FAE will fetch the date from a table first then use that data to fetch data from subsequent table.
say in ur case, if u r using FAE,
1.select from mkpf.
2.select from mseg fae in I_MKPF.
first try using JOIN. if it is taking lots of time, then try FAE.
regards,
madhu

Is there a property to set the position of a table-scrollbar to the begining?

Similar Messages

Maybe you are looking for