Is there a pure digital signal path from Game to Receiver (using XiFi and DD

Hi Everybody,
when using Dolby Digital Li've on one of the later XiFi cards: Am I fortified against electrical interferance within my computer? That is, is any of the analogous part of the soundcard still working?
I'd like to use the card mainly for games. It will be connected to a receiver via digital output. Therefore, everything up to the receiver could be digital: Game sound (Multiple spatial sound sources), sound processing in the card (resulting in 2-8 digital channels), encoding into a dolby digital stream (via DDL processor), transfer to receiver. Only there, qualitity digital/analog transformers start to work and the analogous signals are well protected from the electrical pollution within my PC.
Does ist actually work like that? Is part of the signal path on the card always analogous? I really fear the interferance of the electrical field within my PC with the sound signal. I could imagine that the DDL-Processor takes analogous signals as input. I did find nothing contrary on the dolby web site.
Thanks for any help,
Oli'ver

actually DDL is software encoder and yes if U use it the analogue section of the card will not be used at all the bit stream will be passedthrough to your receiver.

Similar Messages

Business Partner distribution from CRM-PI-MDM using XIF and PI Proxy

Hi,
I would like to know if there is any step-by-step documentation on configuration of ABAP proxy with XIF in SAP CRM for distribution of Business partner information to MDM system. There is XI Content for this but there is no documentation which highlights configuration of proxy.
I did looked at following links but was looking for any other document with details.
http://help.sap.com/saphelp_crm50/helpdata/en/42/b6efbe82103120e10000000a1553f7/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
(Talks about using IDoc)
Thanks,
Divyakumar Jain

HI,
Have checked the blog
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Here you will get the steps to generate the client proxy in R/3.
Or You can configure the proxy settings as per below blog
You need to Setup the HTTP connection for ABAP Proxy,
http://help.sap.com/saphelp_nw70/helpdata/en/da/11df3a9b10355ae10000000a11405a/frameset.htm
Thanks
Swarup

My daq 6008 wil not drop the 5V after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside

my daq 6008 wil not drop the 5V on a digital output after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside, but i can t seemto get it to work

i attached the block diagram so you can have a look
Attachments:
PID Temp control.docx ‏120 KB

Is there any deffirence for master data from flat fime bi 7.0 and 3.5?

hi friends,
is there any deffirence for master data from flat fime bi 7.0 and 3.5?
regards
suneel.

you can follow the same 3.x dataflow eventhough u upgrade.
the only diff
3.x - would be emulated DS
7.0 - RSDS
3.x - file path declared in infopack
7.0 - is declared in DS (that would be inherted by infopack)
Infosource - optional - works fine on both the versions
creating a new DS, it has to be RSDS .. no way out

HT1918 I have opened my account on my credit card and there has been 3 payments go from my account. 17.49 and then day before 5.49 and 4 days before 4.99. Really annoyed that apple can let this happen and letting app makers con people by doing this. Anapp

I have opened my account on my credit card and there has been 3 payments go from my account. 17.49 and then day before 5.49 and 4 days before 4.99. Really annoyed that apple can let this happen and letting app makers con people by doing this.
Don't know how this has happened, would like a refund what is the procedure.

You haven't bought any items, including in-app purchases within apps and/or auto-renewing subscriptions ? You can view the purchase history on your computer's iTunes : http://support.apple.com/kb/HT2727
If you haven't made any purchases, and nobody else has access to your account or devices and may have made them, then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Is there a way to do a spelling quiz in captivate using images and not questions as reference.

Is there a way to do a spelling quiz in captivate using images and not questions as reference. Specifically i want have blank lines underneath an image, where the user looks at the image and types the correct letters to fill in the blank. For example a picture of a dog, with this _ _ _ underneath for the user to fill in, or in some cases perhaps having them fill in the vowel like so "d_g".I must have audio with this , as the students will be able to listen to the audio sound out the word phonetially to help them be able to type it!
Appreciate any advice! Cheers!

Hello everybody!
This widget is great!! Thank you for that!!
I searched for something like that earlier and made an other workaround:
http://forums.adobe.com/message/1912430#1912430
The Javascript did not work in my test. I brought to the "if you reach this slide" feature but it failed.
Regards,
Markus

Measuring digital signals coming from the HSDIO (PXI-6542) with the DMM (PXI-4070)

Hello,
in attachment you can find the program I'm using for my measurement: I'm generating and acquiring digital signals with the PXI-6542 and at some trigger point of one of those digital signals I'd like to capture the measured values on a plot with the Digital MultiMeter (PXI-4070).
It does work if you configure the generation repeat mode as continuous, but if you do have a finite repetition (repeat count is 1) it doesn't react on the trigger, as if it can't find a trigger. On the other hand, if you have a finite repeat count of 30 or more it does react and triggers correctly again.
First I though it had something to do with autocalibration before the measurement takes place, but If you do a highlight execution (stepping through the program) it looks like it measures before the generation session is initialized.
Is there a way to measure correctly when the repeat count is only 1?
Thanks in advance,
Jürgen

Hey Jürgen. I apologize that you haven't gotten an answer yet to your post. I looked at your code and had some questions. What is the source of your trigger to your DMM? I see that you're exporting the data active event to PFI1, and your comments indicate that PFI1 and PFI2 are connected to give you a start trigger for your digital acquisition. Exporting the data active event with a finite or continuous pulse should only give you a single edge per run, though - you wouldn't get a pulse each time. Is your trigger coming from a data line? I didn't see any line in your included data that would indicate a single pulse.
The other thing that I noticed is that you've got no timing dependency between your HSDIO code and your DMM code - they're in parallel with each other. Thus you could get different results run-to-run, since it's not deterministic as to which parallel "thread" that LV will start on first. LV may switch back and forth several times, but let's say that LV reaches the HSDIO Start command before reaching the DMM Start command - in that case, the HSDIO device may finish it's entire operation before the DMM ever starts looking for a trigger, and thus never get the trigger at all. I'm not sure why this would explain why you're seeing the finite case work and the continuous case not, but I wanted to point it out because it could bite you down the road.
I hope some of this this helps get you going in the right direction. I'd also suggest posting HW-centric questions in the appropriate form. There are Digital forums and DMM forums that might help you reach people that will be more familiar with your particular hardware.
Chris

Is there an Apple alternative to using the Asus videophone. Is there a simple FaceTime alternative for an elderly person to use. iPod and docking station maybe?

I have an elderly parent and recently bought a secondhand Asus SV1T video phone to be able to Skype from my Mac, iPad,iPhone etc. The device was perfect from a usability point of view but when I set it up discovered that the latest vesion of Skype is not supported on the Asus and there is no hope of Asus issueing a firmware upgrade to fix it. So the question is "is there a facetime alternative that an 85 year old can use". It needs to be simple to operate, always on and reasonably compact. One thought I had was using an iPod in a speaker dock for power and amplification. I assume you can then tailor the front screen to simply show the facetime icon. Anyone got any thoughts?

You would need to have an iPad with 3G, and pay for cellular data service for it. If you have a wifi-only iPad, you simply cannot access the Internet anywhere that there is no wifi network available. You could tether it to a wifi hotspot created by a smartphone, though having a smartphone significantly reduces the need for FaceTime, I would think.

Download older version of a file from SharePoint Document Library using CSOM and 404 error

Hi,
I am trying to download previous versions including Major and Minor versions of documents from SharePoint Online using CSOM. I get 404 error when I try to download the file. I found several posts on various discussion forums where people are getting same
error but none of those have any solution/answer. Below is one of the threads and sample code I have tried that results in 404 error. If I use the link in browser directly, I am able to download the file. Also I am able to download the current version of file
using CSOM without any problem, it is only the older versions that give me 404 in CSOM.
http://qandasys.info/how-to-download-the-historical-file-version-content-using-csom/
public int GetStreamFromFile(string docid, string lib, string fileurl, ClientContext clientContext, int iuserid, string Version, bool isCurrrent)
if(!isCurrent)
List LibraryName = clientContext.Web.Lists.GetByTitle(lib);
clientContext.Load(LibraryName);
clientContext.ExecuteQuery();
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "" + fileurl +
Microsoft.SharePoint.Client.ListItemCollection collListItem = LibraryName.GetItems(camlQuery);
clientContext.Load(collListItem, items => items.Include(item => item.Id, item => item["FileLeafRef"], item => item["LinkFilename"],
item => item["FileRef"], item => item["File_x0020_Size"], item => item["DocIcon"], item => item.File.Versions));
//clientContext.Load(collListItem);
clientContext.ExecuteQuery();
foreach (Microsoft.SharePoint.Client.ListItem oListItem in collListItem)
//string fileurl1 = (string)oListItem["FileRef"];
//string filename = (string)oListItem["LinkFilename"];
foreach (FileVersion version in oListItem.File.Versions)
if (Version == version.VersionLabel)
//Added excutequery to get object one more time as per blog
//http://social.technet.microsoft.com/Forums/de-DE/sharepointdevelopmentprevious/thread/88a05256-8694-4e40-863d-6c77512e079b
clientContext.ExecuteQuery();
FileInformation fileInformation = ClientOM.File.OpenBinaryDirect(clientContext,version.Url);
bytesarr = ReadFully(fileInformation.Stream);
Darwaish

Hi,
According to your description,
I know you want to get older version of a file from SharePoint Document Library using Client Object Model.
The following code snippet for your reference:
public void GetVersions()
ClientContext clientContext = new ClientContext(“http://SPSite”);
Web site = clientContext.Web;
clientContext.Load(site);
clientContext.ExecuteQuery();
File file = site.GetFileByServerRelativeUrl(“/Shared Documents/mydocument.doc”);
clientContext.Load(file);
clientContext.ExecuteQuery();
ListItem currentItem = file.ListItemAllFields;
clientContext.Load(currentItem);
clientContext.ExecuteQuery();
FileVersionCollection versions = file.Versions;
clientContext.Load(versions);
clientContext.ExecuteQuery();
if (versions != null)
foreach(FileVersion _version in versions)
Console.WriteLine(“Version : {0}”,_version.VersionLabel);
More information:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.file.versions.aspx
Best Regards,
Dennis Guo

How to open a document from a known path from Plugin, I am using CS4

Hi
I have some files in one of the location and wanted to open through plugin
I have a piece of code which does not throw any error nor opens the document
I get the message "Before" and "After"
i would like to know where am i going wrong
Code below:
const ASUnicode *s = (ASUnicode *) "C:\\test.ai";AIColorModel colorModel = kAIUnknownColorModel;
ai::FilePath path;
path.Set(ai::UnicodeString(s),
false);ActionDialogStatus dialogStatus = kDialogNone;
AIBoolean forceCopy=
false;sADMBasic->MessageAlert("Before");
error = sAIDocumentList->Open(path, colorModel, dialogStatus, forceCopy, &document);
sADMBasic->MessageAlert("After")
Experts, Please help me
Thanks
Srinivas

hi
Thanks for the quick reply,
i tried using that but it resulted in compilation error
const ASUnicode *s = (ASUnicode *) "C:\\test.ai";ai::FilePath path(s,true);
Error 5 error C2664: 'ai::FilePath::FilePath(const ai::UnicodeString &,bool)' : cannot convert parameter 1 from 'const ASUnicode *' to 'const ai::UnicodeString &'
Thanks
Srinivas

Is there any way to generate pdf from an xml file using single java class

i m working on generating a pdf file from an xml file. i want to use only a single java class to do so. if theres any such code available please help me to find out.
Thanks
Gurpreet Singh

exactly,
here are some libraries which are open sources;
http://java-source.net/open-source/pdf-libraries hope it's useful. :D

HSDIO Dynamic Generation of Digital Signals on Separate Non-sequential Ports Using the PCI-6542

I am using the PCI-6542 trying to generate serial data timing on separate non-sequential ports 8, 9 and 16 as shown in the attached Digital Waveform Editor JPEG file
I would like to be able to send binary data to ports (lines) 8, 9 and 16 without disturbing the other 29 ports on the PCI-6542 board. Looking on various HSDIO examples I don't see the capability of being able to send dynamic generation in binary format to a group of ports or being able to mask out non-timing involved ports like you can in static generation.
Was anyone successful in implementing this type of serial binary timing waveforms using the PCI-6542 board.
Please advise.
Thanks

Hi Nycor,
Outputting your data on lines that you specify is indeed possible on HSDIO cards. You just need to list the channels you want to use in your Channel List when call the niHSDIO Assign Dynamic Channels VI. For example, for lines 8, 9, and 16, you would input 8,9,16 into the Channel List. Order in this list matters, so the first waveform in your file will correspond to line 8, second waveform to line 9, etc. If your waveforms are out of order in your file, then rearrange the Channel List accordingly.
One of my colleagues here is actually working on an example that implements this; I believe it may be for an open service request that you have. I will speak with her when she is done and see if there is some example code we can provide that demonstrates this. If you have further questions, I am happy to help out here, but you will likely get faster response through your open service request via phone and email.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support

How can i read pwm signals from a rc receiver using myrio??

Hello, i bound a transmitter (rc remote control) with a receiver which i connected it (the signal's pin) to the digital port on myrio. It showed me a boolean indicator, and it wasn't turning on the whole time even when i moved a cursor on the transmitter. When i put a time delay of 1sec in the code the results started to show true on some positions of the throtlle. Can anyone tell me how can i interpret those result to create signal conditioning and control some motors?? thank u all in advance

This is the point in the phone conversation when the mechanic tells the customer, "Why don't you bring your car in?"
Please upload your code so we can help you figure out what's wrong.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How can I erase images from the clipboard while using ink and slide or sketches and lines apps?

I've been having trouble with my clipboard while using my adobe ink. Is there any way I can erase the images saved on the clipboard, because have been trying and I can't find a way to do it, it seems like the only option is by turning the selection into favorites and then a trashcan icon appears, but even if I choose delete it will only be erased from the clipboard favorites while remaining on the clipboard.
I've thought erasing the sketches App, or deleting the project but I don't want to risk losing my work.
Thanks!

I posed a similar question in the Draw forum and got this reply:
Re: How to clear the clipboard and empty drawings ?
In short: you can't erase those clippings, at least not currently.

Converting key figures from rows to column using DSO and start routine

Hi SDNer:
I need some help to convert key figures from rows to column.
The source is DSO 1 and I am thinking about writing ABAP in the start routine to do the conversion. The target is DSO2.
Below is the more detail information with example. Basically, for each record in DSO 1 I need to create 3 records (because there are 3 KF's) and output to DSO2.
I would really appreciate some help on this.Thank you.
Tony
DSO 1 data format (SOURCE)
Period   ID   KF1 KF2 KF3
200702 100 300 200   750
Output to DSO 2 (TARGET)
Period   ID    KF LABEL
200702 100 300 KF1
200702 100 200 KF2
200702 100 750 KF3

This is the code in BI 7.0.
u need to put a field "Label" in DSO1. u dont need to populate this in DSO1 but it helps the code to populate the field in DSO2.
DATA: wa_result TYPE _ty_s_sc_1,
t_result TYPE STANDARD TABLE OF _ty_s_sc_1.
DATA:counter(2) TYPE n.
LOOP AT SOURCE_PACKAGE INTO wa_result.
counter =0.
while counter < 3 .
wa_result- Period = wa_result-Period.
wa_result- ID = wa_result-ID.
if counter = 0.
wa_result- KF1 = wa_result-KF1.
wa_result- Label = 'KF1'.
elseif counter = 1.
wa_result- KF1 = wa_result-KF2.
wa_result- Label = 'KF2'.
else.
wa_result- KF1 = wa_result-KF3.
wa_result- Label = 'KF3'.
endif.
APPEND wa_result TO t_result.
counter = counter+1.
endwhile.
endloop.
CLEAR: SOURCE_PACKAGE,wa_result.
LOOP AT t_result INTO wa_result.
APPEND wa_result TO SOURCE_PACKAGE.
ENDLOOP.

Is there a pure digital signal path from Game to Receiver (using XiFi and DD

Similar Messages

Maybe you are looking for