Is there a reference for the flows tables/views?
Hi,
for my own htmldb-forum I want to find the last login time of somebody, so I could determine which will be new forum messages for this user.
Where can I find these informations? Is there a reference for the Flows tables and views?
Bye,
Jens
heheh for learning purpose I been thinking of developing an app like what you have there.
Is yours done ?
Can we get have a look ?
thanks
Similar Messages
-
Is there a limit for the Account Transformation Table?
Hi Gurus,
I am anxious to know is there a limit for the or any particular number for maintaing Account Transformation table. 2) If many rules are existing in the Table, will it cause any performance issue.
Regards,
KumarMGHello Kumar,
I endorse the view expressed by Lokesh. Yes, there is no limit to the number of Account Transformation Rules that you can maintain in the Transformation Table. One way to limit this number is to use carefully maintained hierarchies instead of specifying individual accounts in the Rule. However, this is not always possible - but will help limit the number of entries in the Account Transformation Table. To create Cash Flow Satatement, you have to anyway use the Account Transformation Rule and surely this would stretch the number of entries in the table. For a complex requirement, these might extend to a few hundred entries. Performance will be an issue, no doubt.
Chakrapani -
How to find the Datasources for the given table names ?
Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
SrinivasHi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM -
Header of the flowed table got missing on 3rd & subsequent pages under some scenario
My form has several flowed table (each table consists of 1 row only) that follows one another on a flowed page.
Each table is expandable and allowed page break within content and the table header row is checked with "Include in initial and subsequent pages" under "Pagination tab" and also checked with "Repeat Row for each data item" under "Binding tab" of the Object Palette.
It is normally ok until following scenario is hit:
If the 1st table nearly fills up to the bottom of the 1st page and there is just enough space to start the 2nd table's tabel header, this header will be shown at the bottom of 1st page and then continues to the next page, on this page the header row still appears for the 2nd table at the top, but when the data continues to flow to the 3rd page, the table header will be missing for subsequent pages.
I have tried LiveCycle Designer v8.0 & v8.2 and it is still not ok, just want to know if it is a bug.
Thanks in advance.Try setting the Header Row to allow to repeat. I've had to set that Repeat option to get things to break over pages correctly.
Ryan D. Lunka
Cardinal Solutions Group
[email protected] -
I need a reference for the parameters in Firefox about:config.
I need a reference for the parameters in Firefox about:config.
I can't find it on the Web.*http://kb.mozillazine.org/about%3Aconfig_entries
*http://kb.mozillazine.org/Category:Preferences
There is also info in the Firefox preferences files (open via the location bar):
*resource:///defaults/pref/firefox.js
* resource:///greprefs.js -
Query for the huge table is not working.
Hi,
I am having a link between oracle server and Microsoft sql server let' say 'SQLWEB' this link is perfectly working fine when I query table having few hundred thousand records but It’s not working for one of the table which is having a more then 3 million record at sql server. any one of you is having any Idea why this peculiar behavior is there any limitations for this heterogeneous link is there any workaround for the same. Below you can see the first query returns the count from table but second query is getting disconnected as that’s a very huge table having millions of record.
shams at oracleserver> select count(*) from investors@sqlweb ;
COUNT(*)
15096
shams at oracleserver> select count(*) from transactions@sqlweb;
select count(*) from transactions@sqlweb
ERROR at line 1:
ORA-02068: following severe error from SQLWEB
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=%s
ORA-28509: unable to establish a connection to non-Oracle system
Regards
Shamsheer
Message was edited by:
ShamsheerIn general you want to minimize the traffic going over the dblink. This is best handled with view on the sql server try. You might try creating a view on sql server like:
create view all_investors as
select * from investors
Then from sql plus:
select count from all_investors@sqlweb. -
Is there a shortcut for the address bar?
Not like
CTRL+K for the search bar then Shift+Tab.
or
F6 then Tab (and another Tab in some cases)
If there is shortcut for the address bar, then why isn't it listed here:
https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts?as=aaq
If there are no shortcut, does anyone know the reason why? For me it would be the most used shortcut by far.''Is there a shortcut for the address bar?''
"Ctrl+L" for the Location bar.
For more keyboard shortcuts see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
* Keyboard shortcuts | How to | Firefox Help<br>https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts -
How to findout the data source information for the perticular tables
Hi,
Can you please tell me the process to findout the data source information for the perticular tables .
For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
Thanks.Hi,
Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
I have searched in help.sap.com but I didn't find any information on this .
Please let me know is there any way to know the data source details for SAP Tables.
Thanks -
Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
VijayHi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar -
Is there an app for the ipad that will allow you to access your mac.
Is there an app for the ipad that will allow you to access your mac via wifi or cell network.
Yep, two of the most popular apps are "LogMeIn Ignition" and "iTeleport." Check them out, they'll both set you back by about 30$ though.
-
Is there a way for the sender of an email to see if it has been read
is there a way for the sender of an email to see if the email has been read?
Some email clients allow for you to request a read receipt, but the sender also has the ability to refuse to send it as well. Much of that is controlled on the receiving end.
-
Creation of a generic extractor and data source for the FAGLFLEXA table
Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, VishalHi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu -
Row Level Security Not working for the ECC table.
Hi All,
We have created a crystal report using SQL Driver.
We have set the row level security on PA0001 table so that we can restrict the query based on Company Code.
But when I run the report, it bypasses the row level security and gives access.
Am I missing some configuration?Hi Ingo,
Security is set up using /crystal/rls transaction. A custom auth object is used for checking the company code with a single field "BUKRS".
This custom auth object is maintained for the PA0001 table.
This object is added at the role level with the restricted access to the Company Code.. -
Is there a workaround for the missing global track chords?
Is there a workaround for the missing global track chords? i.e. will Apple loops follow the chord progression in a track?
I found sort of a work around. I still have Logic Pro 9. It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved. So the information is preserved there just seems no way to create it in X.
-
Checklist for the flow of FI and MM
Hi All,
Can anyone please guide me in preparing checklist for the flow of MM and FI from creation of purchase order to clearing the advance payment.hope tis is of some help
MM Purchase Order (ME21N) No FI Entry
MM RM Purchase GRN / Challan (MIGO) RM Stock
GR / IR Clearing
RM Stock
GR / IR Clearing
If any service PO, instead of MIGO
we want to use ML81n
CIN Ex invoice-Incomming (J1IEX) CENVAT BED Input
CENVAT E-Cess Input
CENVAT Clearing
CENVAT Clearing
MM Purchase Invoice (MIRO)
GR / IR Clearing
CENVAT Clearing
CENVAT Clearing
RM AP VAT Deductible
VENDOR
MM Capital Goods (MIRO) Cenvat Input 50%
Cenvat on Hold 50%
Cenvat Clearing 100%
MM Capital Credit Transferred to Next year (J2I8)
Cenvat Input 50%
Cenvat on Hold 50%
MM Capital Goods with AED
Cenvat AED 100%
Cenvat Clearing 100%
MM Import Procurement (MIRO)
Customs Clearing 7.5%
CVD Clearing 1421
Customs Payable
MM GRN / Challan (MIGO)
Raw Mater Stock
GRIR
Customs Clearing
CIN Excise Invoice (J1IEX)
Cenvat Input
CVD Clearing
MM Invoice Verification (MIRO)
GRIR
VAT
Vendor
MM Sub Contractor PO (ME21N) NO FI Entry
MM Material Issue to Sub Contractor (MB1B) NO FI Entry
Mov type 541
MM Sub Challan Creation (J1IF01) NO FI Entry
MM Sub Challan Print (J1IF11) NO FI Entry
MM Sub Cont Goods Receipt (MIGO)
SFG
Movt type 542 Cons Raw Material
GRIR
Cons Raw Material
Raw Material Stock
MM Sub Cont Reconciliation (J1IFQ) NO FI Entry
MM Sub Cont - Complete/Reversal/Recredit (J1IF13) NO FI Entry
MM List of Sub Contr Challan (J1IFR) NO FI Entry
Maybe you are looking for
-
Voice dialing and talking caller ID
I bought the nokia n9 and while I am very happy of how it looks and feels and greatly disappointed for the lack of many necessary apps and features. The upmost important of which are the voice dialing and talking caller id. Will we ever see these fea
-
How to add characteristic in report without having in the multi provider.
Hi All, I need one requirement to add characteristic in report that is not available in the multiprovider . That field is available on the table level in the BI. How should i bring same field into report level with out adding MP. Note : should not
-
Help please with the 3120 classic
I'm a new user to this phone and have recently purchased a memory card. I have inserted the memory card but am unable to access it. I have looked everywhere to find out how I can access it as well as how to move photos from the phone's memory to th
-
Hi All, Is it possible to extract Assignment Rules of Account / Opportunity via code or Migration Tool ? I was looking for a way to extract the Rules, Rule Criteria and Team Assignment into XML file. Thanks!
-
HP Photosmart B010 , Setup.exe doesn't run
Hello, i'm experiencing a software problem with a Photosmart B010,when I open the setup.exe(from CD, installer o even wizard installer),it runs in background forever(nothing shows, no app no errors), tried the unistall L3 method(http://h10025.www1.hp